MRCREM
Preprogrammed remote designed to work with the MRC88, MRC44 & BXAUDIO

MRC44CB1 Connecting Block
Add external Xantech IR Receivers in conjunction with MRC44/88 Keypads

172-94 XTRA LINK2™
This version of the Xtra Link, Model 172, utilizes the 291-00 IR Receiver which has greatly improved range and interference rejection. The 291-00 receives the IR signals from a hand-held remote, converts them to DC control signals and passes them to the RF/IR Injector where they are mixed with the RF television signal. This combined signal is carried over a coaxial cable. At the other end of this coax the signals are separated at the RF/IR Coupler and the DC control signal is sent to an infrared emitter placed directly on the IR control window of the component you want to control.

172-94X XTRA LINK2™ Expansion Package
172-94X kits are used along with one standard 172-94 when installing Xtra Links in more than one room. This avoids duplication of couplers, emitters and coax jumper cables

291-10 Hidden Link™ IR Receiver
The 291 series are small, shelf-top IR receivers with a multitude of applications. Use them as an inexpensive method of repeating IR commands when wall-mounting an IR receiver is not practical. As with all Xantech IR receivers, the 291 can tie into multiroom IR extension systems.

480B-30 Dinky Link™
Miniature IR receiver that features surface mount technology. The 480 Dinky Link was originally developed in response to requests from many of our custom installers for a small, inconspicuous receiver. It was designed for placement in very tiny spaces. One example is between the grille and baffle board of an in-wall speaker. The high sensitivity of this receiver gives you the ability to place the 480 behind a grille and still receive the IR commands up to 20 feet away. If longer range is necessary, you must drill a 3/8-inch hole in the grille. The 480B-30 is a quick connect version of the 480B-00. Seven-foot cable with 3.5mm stereo mini plug permits direct plug-in to Xantech Connecting Blocks that have an "IR RCVR" or "AUX" jack, such as the CB12, CB20, CB60, 789-44, 791-44, etc.

480-85 LCD/CFL Friendly Dinky Link™
The new 480-85 has adjustable IR Output Carrier Frequency and has been specifically designed to have great immunity to many sources of infrared interference and to have exceptional IR reception range. In particular, it has high rejection of IR interference generated by LCD displays and compact fluorescent lights (CFL). In addition, the 480-85 will operate in direct sunlight!

490-30 Micro Link™
Another miniature IR receiver that features surface mount technology. The 490 has its electronics housed in a brass cylinder. The "business end" of the unit is a small round lens. This small receiver is designed to be placed in very tiny spaces. One example is a small corner of an equipment cabinet. A single, 1/2-inch hole will accommodate the 490. The high sensitivity of this receiver gives you the ability to place the 490 further away from the hand held remote, increasing the placement options you have.

490-95 Plasma / Sunlight / Fluorescent Tube Light-Friendly Micro Link™ Receiver
Rejects interference from plasma displays, direct sunlight and fluorescent tube lights for accurate IR signal reception.

780-10 J-Box Receiver
These IR receivers are designed to mount in single-gang electrical J-boxes. The mounting screws and red lens insert allow the installer to use decorator-style wall plates. The ubiquitous 780 has been the choice of custom installers for years. Use it for general applications at lowest cost.

780-80 CFL Friendly J-Box Receiver
This version of the 780 has been specifically designed to have great immunity to many sources of infrared interference. In particular, it has high rejection of IR interference generated by compact fluorescent lights (CFL). In addition, the 780-80 will operate in direct sunlight! NOTE: 780-80 operates in 3-wire mode only.

480-85BKIT/RP LCD / CFL / Sunlight Friendly Dinky Link™ Kit
Use when LCD Displays or direct sunlight / compact fluorescent lights are present. LCD displays emit light wavelengths that interfere with IR carrier frequencies. Xantech’s exclusive adjustable frequency range eliminates this problem.
Prepackaged kit includes:
(1) 480-85B (1) 789-44 Connecting Block
(1) 781RG Power Supply (4) 283M Blink IR Mouse Emitters

490-95KIT/RP Plasma / Sunlight / Fluorescent Tube Light-Friendly Micro Link™ Kit
Rejects interference from plasma displays, direct sunlight and fluorescent tube lights for accurate IR signal reception.
Prepackaged kit includes:
(1) 490-95 (1) 789-44 Connecting Block
(1) 781RG Power Supply (4) 283M Blink IR Mouse Emitters

480B-KIT Dinky Link™ Kit
Miniature IR receiver that features surface mount technology. The 480 Dinky Link was originally developed in response to requests from many of our custom installers for a small, inconspicuous receiver. It was designed for placement in very tiny spaces.
Package contains:
(1) 48030 Dinky Link (1) 789-44 Connecting Block
(1) 781RG Power Supply (4) 283M Blink IR Mouse Emitters

282M Mouse Emitter
Non visible, high output version. This series of mini emitters contain a tiny infrared light emitting diode housed in a miniature, almost black, injection molded plastic shell. These versatile units can be used in a number of innovative ways.

284M Dual Mouse Emitter
Two emitters in series with each other and terminated in a single 3.5mm mono mini plug. This series of mini emitters contain a tiny infrared light emitting diode housed in a miniature, almost black, injection molded plastic shell. These versatile units can be used in a number of innovative ways.

283M Mouse Emitter
Visible, low-output version of the 282M. This series of mini emitters contain a tiny infrared light emitting diode housed in a miniature, almost black, injection molded plastic shell. These versatile units can be used in a number of innovative ways.

286M Dual Blink-IR Mouse Emitter
Dual version of the 283M. This series of mini emitters contain a tiny infrared light emitting diode housed in a miniature, almost black, injection molded plastic shell. These versatile units can be used in a number of innovative ways.

789-44PS/RP One Zone Connecting Block with Power Supply
Connects four emitter ports and power supply to all Xantech infrared receivers and keypads. Four parallel emitter ports with 470 Ohm resistors drive 4 single or 4 dual emitters. Quick-connect stereo mini jack for Xantech IR Receivers that use a stereo mini plug. STATUS terminal for connection of Xantech IR Receivers and Keypads that have status indicator LED's. 2.1 mm coaxial power jack. Uses either the 781RG or 782-00 power supply. Dimensions: 3" x 1 3/4" x 13/16" (77mm x 45mm x 21mm). 781RG power supply is included.

790-00 Multiple Emitter Connecting Block
Emitter expansion block for the 791-44 or 792-10

796-20 Six Zone Connecting Block / Expander
Expands the 795 Zone Controller to a total of 9 zones. Connects directly to the 795 and is powered via the 795. Can be used in conjunction with a 791-44 (without a 795) for a 6 zone system. Multiple 796's may be used with a 791-44 for even more zones (limited only by IR noise considerations). Dimensions: 1" x 13 3/8" x 1 7/8" (26mm x 340mm x 48mm).

791-44 One Zone Amplified Connecting Block
Amplified version of the 790-00. Emitter ports with jumpers permit high or low power. High-speed opto-isolator for improved operation. Quick connect stereo mini jack for Xantech IR Receivers that use a stereo mini plug. Parallel emitter ports drive 10 single or 10 dual emitters. Up to nine 790-00's can be connected to the 791-44 if more than 10 emitter ports are needed. STATUS terminal for connection of Xantech IR Receivers and Keypads that have status indicator LED's. Contains red LED input signal Test-IR. Uses either the 781RG or 782-00 power supply. Dimensions: 6" x 2 1/4" x 15/16" (153mm x 58mm x 24mm).

CB12 One Zone Connecting Block
Connects one emitter port and power supply to Xantech IR Receivers that use a stereo mini plug. Also includes a 3-terminal block for wired connection of Xantech IR Receivers and Smart Pads. 3.5 mm stereo mini jack for quick-connect IR receivers. 3.5 mm mono mini jack for 1 single or 1 dual emitter. 2.1 mm coaxial power jack Uses either the 781RG or 782-00 power supply. Dimensions: 2-1/8" x 1-1/4" x 3/4" (54mm x 32mm x 19mm).

XVCS100IR 100 Watt Impedance Matching Decora™ Slide Volume Control With IR
Power handling: 100 Watts continuous. Adjustable impedance matching for up to 8 speaker pairs (1,2,4,8 pairs). Attenuation: 11 steps plus Off; max 42 dB. Contact type: Make before break. Frequency range: 20Hz-20kHz ± 1dB. 14 gauge Quick Connect speaker terminals. Mounting: Minimum 20 cubic inch or open J-box. Almond, Black, Ivory and White Decora slider inserts included in box. RoHS compliant. UL Listed.

XVCO100 100 Watt Impedance Matching Outdoor Rotary Volume Control
Power handling: 100 Watts continuous. Adjustable impedance matching for up to 8 speaker pairs (1,2,4,8 pairs). Attenuation: 11 steps plus Off; max 42 dB. Contact type: Make before break. Frequency range: 20Hz-20kHz ± 1dB. 14 gauge Quick Connect speaker terminals. Mounting: Minimum 20 cubic inch or open J-box. Weatherproof enclosure included. Color: Grey. RoHS compliant. UL Listed.

XVCD100IR 100 Watt Impedance Matching Decora™ Rotary Volume Control With IR
Power handling: 100 Watts continuous. Adjustable impedance matching for up to 8 speaker pairs (1,2,4,8 pairs). Attenuation: 11 steps plus Off; max 42 dB. Contact type: Make before break. Frequency range: 20Hz-20kHz ± 1dB. 14 gauge Quick Connect speaker terminals. Mounting: Minimum 20 cubic inch or open J-box. Almond, Black, Ivory and White Decora inserts and knobs included in box. RoHS compliant. UL Listed.

686-10 IR Controlled Remote Speaker Switcher
The 686-10 is a stand alone speaker switcher. It allows the installer and user to turn six pairs of speakers ON and OFF by way of infrared commands. Allows local or global command of speaker control.

AV61 Audio/Video Six-Way Distribution Amplifier
The AV-61, in a "flat pack" design for incredible flexibility, is the perfect companion to the Xantech 795 and 796 Zone Controllers. It gives you the ability to split stereo audio and video signals six ways without any splitter loss. It also prevents audio distortion by buffering the sources from the loading effects of several AV receivers or preamps in a zoned system.

781ERGPS Regulated Power Supply
A high-efficiency power supply specified to provide power to all Xantech IR products. A versatile plug has a locking indentation ring providing a secure connection to all Xantech IR connecting blocks. A small form-factor allows tighter installation and reduces a clumsy rack-installation.

• Input Power: 100-240VAC, 0.3A
• Output Power: +12VDC, 500mA
• 6 foot cable, 2.1 mm coaxial secure-fit plug