VHF/UHF/FM Preamplifiers

In some metropolitan areas Winegard has determined that the addition of digital sister stations may overdrive the input level on higher gain pre-amps. The HDP-269 has been designed specifically for the SquareShooter™ SS-1000 antenna to help overcome the digital dropouts associated with over amplification. Used in high input suburban areas to overcome cable loss, etc (using approximately 150' of RG-6/U cable).

Technical Specifications

• Input/output connections: 75 ohms
• Avg Gain: 12dB / 82 channel
• Avg Noise: 3dB
• Total Input: 350,000 microvolts
• Power supply included

Features 75 ohm input for convenience and easier installation. Universal housing can be used with any off-air TV antenna. Made of high impact ABS material, mast mounted for easy installation. Flexible polyethylene boot covers on 75 ohm models keep connections clean, dry, weather-protected. Zinc-plated steel hardware; all mounting hardware included.

Selectable FM trap reduces FM signals (88-108 MHz) -15 dB to prevent overload, tunable FM trap reduces a 3 MHz band width by -12 dB. Both adjustable - switchable without opening the housing.

Transistor burn-out virtually eliminated with specialized circuitry featuring fast recovery diode that protects against lightning-caused pulses. Operating temperatures -40° to +140° F. 117 VAC UL and CSA approved power supply is included. (Does not include F-connectors.)

U.S. Patent No. D335,887, D358,365, 5,515,240 (Power supply housing design)

NOTE: Preamplifiers and/or amplifiers only amplify the signal your antenna receives. They cannot extend the receiving range of an antenna or help pull in signal. Also, DO NOT use the higher gain models within 35 miles of your transmitters.

Technical Specifications

Features 75 ohm input for convenience and easier installation. Universal housing can be used with any off-air TV antenna. Made of high impact ABS material, mast mounted for easy installation. Flexible polyethylene boot covers on 75 ohm models keep connections clean, dry, weather-protected. Zinc-plated steel hardware; all mounting hardware included.

Selectable FM trap reduces FM signals (88-108 MHz) -15 dB to prevent overload, tunable FM trap reduces a 3 MHz band width by -12 dB. Both adjustable - switchable without opening the housing.

Transistor burn-out virtually eliminated with specialized circuitry featuring fast recovery diode that protects against lightning-caused pulses. Operating temperatures -40° to +140° F. 117 VAC UL and CSA approved power supply is included. (Does not include F-connectors.)

U.S. Patent No. D335,887, D358,365, 5,515,240 (Power supply housing design)

NOTE: Preamplifiers and/or amplifiers only amplify the signal your antenna receives. They cannot extend the receiving range of an antenna or help pull in signal. Also, DO NOT use the higher gain models within 35 miles of your transmitters.

Technical Specifications

Features 75 ohm input for convenience and easier installation. Universal housing can be used with any off-air TV antenna. Made of high impact ABS material, mast mounted for easy installation. Flexible polyethylene boot covers on 75 ohm models keep connections clean, dry, weather-protected. Zinc-plated steel hardware; all mounting hardware included.

Selectable FM trap reduces FM signals (88-108 MHz) -15 dB to prevent overload, tunable FM trap reduces a 3 MHz band width by -12 dB. Both adjustable - switchable without opening the housing.

Transistor burn-out virtually eliminated with specialized circuitry featuring fast recovery diode that protects against lightning-caused pulses. Operating temperatures -40° to +140° F. 117 VAC UL and CSA approved power supply is included. (Does not include F-connectors.)

U.S. Patent No. D335,887, D358,365, 5,515,240 (Power supply housing design)

NOTE: Preamplifiers and/or amplifiers only amplify the signal your antenna receives. They cannot extend the receiving range of an antenna or help pull in signal. Also, DO NOT use the higher gain models within 35 miles of your transmitters.

Technical Specifications