- Flat Panel Mounts
- Digital Signage
- Projector Mounts
- Equipment Racks
- Security Mounts
- Mounting Accessories
- Antenna Mounts
- Speaker Mounts
Flat Panel Mount Adapters
400mm x 200mm VESA adapter plate
The AP-1 VESA adapter plate adapts a VESA 200mm plate to accommodate a VESA 400mm x 200mm hole pattern.
Dual Mid-Size Flat Panel Ceiling Mount Adapter
The LCD-MID-CM2 adapter allows the LCD-MID-C to accommodate two 27" to 42" flat panel displays back-to-back with a combined weight of up to 200 lbs.
300mm x 300mm VESA adapter Plate
The AP-2B VESA adapter plate adapts a VESA 200mm plate to accommodate a VESA 300mm x 300mm hole pattern.
The LCD-PA is a pole adapter used with the LCD-1 and LCD-2537 to enable these mounts to be attached to a round or square pole.
In-Wall Box adapter
The IWB-1 is an in wall box adapter that allows up to a 37" flat panel to fully collapse into a wall. It installs easily between two 16" on center wooden studs, has integrated cable and electrical knockouts and a high load capacity. The IWB-1 works with the LCD-1(B) and LCD-2537(B) mounts.
Dual Small Flat Panel Wall Mount Adapter
The LCD-WM2B adapter allows the LCD-1B to accommodate two 10" to 23" flat panels off the wall.
Dual Small Flat Panel Ceiling Mount Adapter
The LCD-CM2B adapter allows the LCD-1CB to accommodate two 10" to 23" flat panels.
Dual Large Flat Panel Ceiling Mount Adapter
The PDS-LCM2B adapter allows the PDS-LCB to accommodate two 37" to 63" flat panel displays back-to-back with a combined weight of up to 360 lbs.
Dual Small Flat Panel Desk Mount Adapter
The LCD-DM2 allows for two LCD-1 mounts to be attached onto a desktop via clamp-on or bolt through. Accommodates most flat panels 10" to 23" with a combined load capacity of 50 lbs.
Portrait Mounting Rails
The AR-1B are mounting rails designed to extend the length of the mounting rails of various mounts for portrait mounting or mounting larger vertical hole patterns. They are capable of securing a 650mm tall hole pattern and come in a sleak black powder coat finish.