SmartOnline UPS Systems

• 750VA on-line, double-conversion, extended-run 2U rack/tower UPS
• Maintains sine wave 100/110 or 120V +/-2% output during overvoltages to 138V and brownouts as low as 65V (50/60Hz auto-sensing)
• Simultaneous communications via HID-compliant USB port, serial port, SNMP/Web card slot and EPO interface
• Fault-tolerant auto-bypass mode, current monitoring and switched PDU control via 2 switchable output load banks
• Input—NEMA 5-15P (120V 15A); Output—6 NEMA 5-15R (120V)
• 2-year product warranty and $250,000 Ultimate Lifetime Insurance (USA & Canada only)

750VA on-line, double-conversion UPS system for critical server, network and telecommunications equipment. 2U rackmount form factor with an installed depth of only 13.5 in. Expandable battery runtime with optional BP24V28-2U and BP24V70-3U external battery packs. Full-time sine wave 100, 110 or 120V +/-2% output. Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 65V and overvoltages to 138V / NEMA 5-15P input plug; NEMA 5-15R output receptacles. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Integrated two-bank PDU switching supports load shedding and remote reboot of connected equipment. 3-stage metered current monitoring and battery charge status LEDs. LED display panel easily rotates for viewing in rackmount or tower configurations. Dataline surge suppression for dialup, DSL or network Ethernet connection. Utility power and voltage regulation LEDs. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories included; 2-9USTAND tower kit and 2POSTRMKITWM 2-post rack & wallmount accessories available. Field-replaceable, hot-swappable internal batteries and external battery packs. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.

Features:

• SmartOnline high-performance UPS system is ideal for critical voice, data, medical and industrial network applications
• True on-line, double-conversion UPS provides perfectly regulated sine wave output within 2% of 100/110/120V (user selectable) under all usage conditions
• Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
• Removes harmonic distortion, fast electrical impulses, frequency variations and other hard-to-solve power problems not addressed by other UPS types
• Corrects line voltage conditions as low as 65V and as high as 138V back to selectable 100/110/120V (+/-2%) values
• Standard internal battery set offers 11 min. runtime at half load (300W) and 6 min. at full load (600W)
• Optional BP24V28-2U and BP24V70-3U external battery pack accessories available
• Compact rackmount form factor installs using only 2 rack spaces (2U) with a maximum installed depth of only 13.5 inches
• Ships with all mounting accessories for 4-post rackmount installation
• Optional 2POSTRMKITWM enables 2-post rackmount or wallmount installation
• Optional 2-9USTAND accessory enables small-footprint upright tower placement
• Fault-tolerant auto-bypass maintains continuous utility output to connected equipment, even if the UPS suffers internal failure and requires maintenance
• Network interfaces support simultaneous communications via built-in USB, DB9 serial and SNMPWEBCARD slot
• Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.
• Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
• UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test, load bank output power control and remote reboot, UPS nominal voltage adjustment and UPS line to battery power voltage set points
• Built-in Emergency Power Off (EPO) interface with cable
• NEMA 5-15P input plug / NEMA 5-15R output receptacles
• Integrated 2-bank switched PDU enables remote outlet management for load shedding or remote reboot of individual devices (each load bank consists of a single outlet)
• Front panel LEDs offer current monitoring and battery charge level information
• UPS ships fully assembled in full compliance with DOT regulations; no time-consuming connection of internal batteries by user required
• Supports 2-post rackmount installation with optional 2POSTRMKITWM accessory
• Single-line tel/DSL or network Ethernet line surge suppression

Typical Applications:

Ideal for protection of critical 120V equipment in server rooms, internetworking closets and telecommunications systems in rackmount or tower applications. Common applications include corporate or departmental servers, workstations, hubs, routers, bridges, CAD/CAM workstations, concentrators, IP telephony and traditional PBX switching systems.

Options & Accessories:

• External battery packs: BP24V28-2U, BP24V70-3U
• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
• Basic Power Distribution Units (PDU): PDU1215, PDU1415
• Metered Power Distribution Units (PDU): PDUMH15, PDUMV15
• Metered Power Distribution Units (PDU) with Auto Transfer Switching (ATS) and Dual Redundant AC Inputs: PDUMH15AT
• Switched, Metered PDUs with Auto Transfer Switching (ATS), Dual Redundant AC Inputs and Network Interface: PDUMH15ATNET
• Rack enclosures: Rack Systems
• Two-Post Rackmount Kit: 2POSTRMKITWM
• Tower Stands: 2-9USTAND
• Dataline protectors: DNET1, DTEL2
• AS400/iSeries Shutdown Cable Kit: AS400 CABLE KIT
• Extended warranties: 3 Year WEXT3-500-1500, 5 Year WEXT5-500-1500 

Package Includes:

• Online Double-Conversion UPS System
• PowerAlert Software and cabling
• Mounting hardware for 4-post rack enclosures
• Instruction manual with warranty information

• 1000VA / 1kVA on-line, double-conversion, extended-run 2U rack / tower UPS
• Maintains sine-wave 100/110 or 120V +/-2% output during overvoltages to 138 and brownouts as low as 65V (50/60Hz auto-sensing)
• Simultaneous use communications via HID compliant USB port, serial port, SNMP/Web card slot and EPO interface
• Fault tolerant auto-bypass mode, current monitoring and switched PDU control via 2 switchable output load banks
• Input: NEMA 5-15P (120V 15A) / Output: 6 NEMA 5-15R (120V)
• 2 year product warranty / $250,000 Ultimate Lifetime Insurance (USA & Canada only)

1000VA on-line, double-conversion UPS system for critical server, network and telecommunications equipment. 2U rackmount form factor with an installed depth of only 13.5 in. Expandable battery runtime with optional BP24V28-2U and BP24V70-3U external battery packs. Full-time sine wave 100, 110 or 120V +/-2% output. Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 65V and overvoltages to 138V. NEMA 5-15P input plug; NEMA 5-15R output receptacles. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Integrated two-bank PDU switching supports load shedding and remote reboot of connected equipment. 3-stage metered current monitoring and battery charge status LEDs. LED display panel easily rotates for better viewing in rackmount or tower configurations. Dataline surge suppression for dialup, DSL or network Ethernet connection. Utility power and voltage regulation LEDs. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories included; 2-9USTAND tower kit and 2POSTRMKITWM two post rack & wallmount accessories available. Field replaceable, hot-swappable internal batteries and external battery packs. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.

Features:

• SmartOnline high performance UPS system is ideal for critical voice, data, medical and industrial network applications
• True on-line, double-conversion UPS provides perfectly regulated sine wave output within 2% of 100/110/120V (user selectable) under all usage conditions
• Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
• Removes harmonic distortion, fast electrical impulses, frequency variations and other hard to solve power problems not addressed by other UPS types
• Corrects line voltage conditions as low as 65V and as high as 138V back to selectable 100/110/120V (+/-2%) values
• Standard internal battery set offers 14 minutes runtime at half load (400W) and 4.5 minutes at full load (800W)
• Compact rackmount form factor installs using only 2 rack spaces (2U) with a maximum installed depth of only 13.5 inches
• Ships with all mounting accessories for 4 post rackmount installation
• Optional 2POSTRMKITWM enables 2 post rackmount or wallmount installation
• Optional 2-9USTAND accessory enables small-footprint upright tower placement
• Fault tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS suffers internal failure and requires maintenance
• Network interfaces support simultaneous communications via built-in USB, DB9 serial and SNMPWEBCARD slot
• HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.
• Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
• UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test, load bank output power control and remote reboot, UPS nominal voltage adjustment and UPS line to battery power voltage set points
• Built-in Emergency Power Off (EPO) interface with cable
• NEMA 5-15P input plug / NEMA 5-15R output receptacles
• Integrated 2 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual devices (each load bank consists of one outlet)
• Front panel LEDs offer current monitoring and battery charge level information
• UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user required
• Supports 2 post rackmount installation with optional 2POSTRMKITWM accessory
• Single line TEL/DSL or network ethernet line surge suppression
• 2 year manufacturer's product warranty, $250,000 Ultimate Lifetime Insurance

Typical Applications:

Ideal for protection of critical 120v equipment in server rooms, internetworking closets and telecommunications systems in rackmount or tower applications. Common applications include corporate or departmental servers, workstations, hubs, routers, bridges, CAD/CAM workstations, concentrators, IP telephony and traditional PBX switching systems.

Options & Accessories:

• External battery packs: BP24V28-2U, BP24V70-3U
• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
• Basic Power Distribution Units (PDU): PDU1215, PDU1415
• Metered Power Distribution Units (PDU): PDUMH15, PDUMV15
• Metered Power Distribution Units (PDU) with Auto Transfer Switching (ATS) and Dual Redundant AC Inputs: PDUMH15AT
• Switched, Metered PDUs with Auto Transfer Switching (ATS), Dual Redundant AC Inputs and Network Interface: PDUMH15ATNET
• Rack enclosures: Rack Systems
• Two Post Rackmount/Wallmount Kit: 2POSTRMKITWM
• Tower Stands: 2-9USTAND
• Dataline protectors: DNET1, DTEL2
• AS400/i Series Shutdown Cable Kit: AS400 CABLE KIT
• Extended warranties: 3 Year WEXT3-500-1500, 5 Year WEXT5-500-1500 

Package Includes:

• SU1000RTXL2Ua Online Double-Conversion UPS System
• PowerAlert Software and cabling
• Mounting hardware for 4 post rack enclosures
• Instruction manual with warranty information

• 1500VA/1.5kVA online, double-conversion, extended-run 2U rack/tower UPS
• Maintains sine-wave 100/110 or 120V +/-2% output during overvoltages to 138V and brownouts as low as 65V (50/60Hz auto-sensing)
• Simultaneous communications via HID-compliant USB port, serial port, SNMP/Web card slot and EPO interface
• Fault tolerant auto-bypass mode, current monitoring and switched PDU control via 2 switchable output load banks
• Input: NEMA 5-15P (120V). Output: 6 NEMA 5-15R (120V).
• 2-year product warranty; $250,000 Ultimate Lifetime Insurance (USA & Canada only)

1500VA online, double-conversion UPS system for critical server, network and telecommunications equipment. 2U rackmount form factor with an installed depth of only 19 in. Expandable battery runtime with optional BP48V24-2U and BP48V60RT-3U external battery packs. Full-time sine wave 100, 110 or 120V +/-2% output. Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 65V and overvoltages to 138V. NEMA 5-15P input plug and NEMA 5-15R output receptacles. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces simultaneously. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Integrated two-bank PDU switching supports load shedding and remote reboot of connected equipment. Three-stage metered current monitoring and battery charge status LEDs. LED display panel easily rotates for better viewing in rackmount or tower configurations. Dataline surge suppression for dialup, DSL or network ethernet connection. Utility power and voltage regulation LEDs. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories included; 2-9USTAND tower kit and 2POSTRMKITWM 2-post rack & wallmount accessories available. Field replaceable, hot-swappable internal batteries and external battery packs. Attractive all-black color scheme. Two-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.

Features:

• SmartOnline high-performance UPS system is ideal for critical voice, data, medical and industrial network applications
• True on-line, double-conversion UPS provides perfectly regulated sine wave output within 2% of 100/110/120V (user selectable) under all usage conditions
• Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
• Removes harmonic distortion, fast electrical impulses, frequency variations and other hard to solve power problems not addressed by other UPS types
• Corrects line voltage conditions as low as 65V and as high as 138V back to selectable 100/110/120V (+/-2%) values
• Standard internal battery set offers 17 min. runtime at half load (600W) and 5 min. at full load (1200W)
• Optional BP48V24-2U external battery pack increases runtime to 77 min. at half load (600W) and 38 min. at full load (1200W/limit 1)
• Optional BP48V60RT3U external battery pack increases runtime to 168 min. at half load (600W) and 82 min. at full load (1200W/multi-pack compatible)
• Compact rackmount form factor installs using only 2 rack spaces (2U) with a maximum installed depth of only 19 in.
• Ships with all mounting accessories for 4-post rackmount installation
• Optional 2POSTRMKITWM enables 2-post rackmount or wallmount installation
• Optional 2-9USTAND accessory enables small-footprint upright tower placement
• Fault tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS suffers internal failure and requires maintenance
• Network interfaces support simultaneous communications via built-in USB, DB9 serial and SNMPWEBCARD slot
• HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.
• Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
• UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test, load bank output power control and remote reboot, UPS nominal voltage adjustment and UPS line to battery power voltage set points
• Built-in Emergency Power Off (EPO) interface with cable
• NEMA 5-15P input plug; NEMA 5-15R output receptacles
• Integrated 2-bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks (bank one has 2 outlets, bank two has 4 outlets)
• Front panel LEDs offer current monitoring and battery charge level information
• UPS ships fully assembled in full compliance with DOT regulations; no time-consuming connection of internal batteries by user required
• Supports 2-post rackmount installation with optional 2POSTRMKITWM accessory
• Single-line tel/DSL or network Ethernet surge suppression
• 2-year manufacturer's product warranty; $250,000 ULtimate Lifetime Insurance

Typical Applications:

Ideal for protection of critical 120V equipment in server rooms, internetworking closets and telecommunications systems in rackmount or tower applications. Common applications include corporate or departmental servers, workstations, hubs, routers, bridges, CAD/CAM workstations, concentrators, IP telephony and traditional PBX switching systems.

Options & Accessories:

• External battery pack: BP48V24-2U, BP48V60RT-3U
• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
• AS400/i Series Shutdown Cable Kit: AS400 CABLE KIT
• Dataline protectors: DNET1, DTEL2, DCATV
• Circuit Tester: CT120
• Rack enclosures: Rack Systems
• Power distribution: PDU1215, PS7224
• Two Post Rackmount/Wallmount Kit: 2POSTRMKITWM
• Tower Stands: 2-9USTAND
• Extended warranties: 3 Year WEXT3-500-1500, 5 Year WEXT5-500-1500 

Package Includes:

• SU1500RTXL2Ua Online Double-Conversion UPS System
• PowerAlert Software and cabling
• Mounting hardware for 4 post rack enclosures
• Instruction manual with warranty information

• 2200VA / 2.2kVA on-line, double-conversion, extended-run 2U rack / tower UPS
• Maintains sine-wave 110/120V +/-2% output during overvoltages to 138 and brownouts as low as 65V (50/60Hz auto-sensing)
• Simultaneous communications via HID compliant USB port, serial port, SNMP/Web card slot and EPO interface
• Fault tolerant auto-bypass mode, current monitoring and switched PDU control via 2 switchable output load banks
• Input: NEMA 5-20P (120V) / Output: 6 NEMA 5-15/20R and 1 NEMA L5-20R (120V)
• 2 year product warranty / $250,000 Ultimate Lifetime Insurance (USA & Canada only)

2200VA on-line, double-conversion UPS system for critical server, network and telecommunications equipment. 2U rackmount form factor with an installed depth of only 19 in. Expandable battery runtime with optional BP48V24-2U and BP48V60RT-3U external battery packs. Full-time sine wave 110 or 120V +/-2% output. Online, double-conversion Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 65V and overvoltages to 138V. NEMA 5-20P input plug; NEMA 5-15/20R and NEMA L5-20R output receptacles. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Integrated 2-bank PDU switching supports load shedding and remote-reboot of connected equipment. 3-stage metered current monitoring and battery charge status LEDs. LED display panel easily rotates for better viewing in rackmount or tower configurations. Dataline surge suppression for dialup, DSL or network Ethernet connection. Utility power and voltage regulation LEDs. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories included; 2-9USTAND tower kit and 2POSTRMKITWM two post rack & wallmount accessories available. Field-replaceable, hot-swappable internal batteries and external battery packs. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.

Features:

• SmartOnline high performance UPS system is ideal for critical voice, data, medical and industrial network applications
• True on-line, double-conversion UPS provides perfectly regulated sine wave output within 2% of 110/120V (user selectable) under all usage conditions
• Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
• Removes harmonic distortion, fast electrical impulses, frequency variations and other hard to solve power problems not addressed by other UPS types
• Corrects line voltage conditions as low as 65V and as high as 138V back to selectable 110/120V (+/-2%) values
• Standard internal battery set offers 14 minutes runtime at half load (800W) and 4.5 minutes at full load (1600W)
• Extended Runtime with BP48V24-2U (limit 1) or BP48V60RT3U (multi-pack compatible) external battery packs
• Compact rackmount form factor installs using only 2 rack spaces (2U) with a maximum installed depth of only 19 inches
• Ships with all mounting accessories for 4 post rackmount installation
• Optional 2POSTRMKITWM enables 2 post rackmount or wallmount installation
• Optional 2-9USTAND accessory enables small-footprint upright tower placement
• Fault tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS suffers internal failure and requires maintenance
• Network interfaces support simultaneous communications via built-in USB, DB9 serial and SNMPWEBCARD slot
• HID compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
• Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
• UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test, load bank output power control and remote reboot, UPS nominal voltage adjustment and UPS line to battery power voltage set points
• Built-in Emergency Power Off (EPO) interface with cable
• NEMA 5-20P input plug (user-installable NEMA 5-15P replacement plug included) / NEMA 5-15/20R & NEMA L5-20R output receptacles
• Integrated 2 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks (each bank has 3 outlets)
• Front panel LEDs offer current monitoring and battery charge level information
• UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user required
• Single line TEL/DSL or network ethernet line surge suppression
• 2 year manufacturer's product warranty, $250,000 Ultimate Lifetime Insurance

Typical Applications:

Ideal for protection of critical 120V equipment in server rooms, internetworking closets and telecommunications systems in rackmount or tower applications. Common applications include corporate or departmental servers, workstations, hubs, routers, bridges, CAD/CAM workstations, concentrators, IP telephony and traditional PBX switching systems.

Options & Accessories:

• External battery pack: BP48V24-2U, BP48V60RT-3U
• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
• AS400/i Series Shutdown Cable Kit: AS400 CABLE KIT
• Dataline protectors: DNET1, DTEL2, DCATV
• Circuit Tester: CT120
• Rack enclosures: RACK SYSTEMS
• Power distribution: PDU1215, PS7224
• Two Post Rackmount/Wallmount Kit: 2POSTRMKITWM
• Tower Stands: 2-9USTAND
• Extended warranties: 3 Year WEXT3-2200-3000, 5 Year WEXT5-2200-3000 

Package Includes:

• SU2200RTXL2Ua On-line Double-Conversion UPS System
• PowerAlert Software and cabling
• Mounting hardware for 4 post rack enclosures
• Instruction manual with warranty information

• 3000VA / 2400W on-line, double-conversion, extended-run 3U rack / tower UPS
• Maintains sine-wave 110/120V +/-2% output during overvoltages to 138 and brownouts as low as 65V (50/60Hz auto-sensing)
• Simultaneous use communications via HID compliant USB port, serial port, SNMP/Web card slot and EPO interface
• Fault tolerant auto-bypass mode, current monitoring and switched PDU control via 2 switchable output load banks
• Input: NEMA L5-30P (120V) / Output: 4 NEMA5-15R, 4 NEMA5-15/20R & 1 NEMA L5-30R
• 2 year product warranty / $250,000 Ultimate Lifetime Insurance (USA & Canada only)

3000VA on-line, double-conversion UPS system for critical server, network and telecommunications equipment / 3U rackmount form factor with an installed depth of 26 inches / Expandable battery runtime with optional BP72V15-2U and BP72V28RT-3U external battery packs / Full time sine wave 110 or 120V +/-2% output / Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output / Operates continuously without using battery power during brownouts to 65V and overvoltages to 138V / NEMA L5-30P input plug / NEMA 5-15, NEMA 5-15/20R and NEMA L5-30R output receptacles / Network-grade AC surge and noise suppression / Zero transfer time between AC and battery operation / Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot / Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X / Supports simultaneous detailed monitoring of equipment load levels, self-test data and mains power conditions via all 3 network interfaces at once / Includes PowerAlert monitoring software and complete cabling / Emergency Power Off (EPO) interface / Integrated two bank PDU switching supports load shedding and remote-reboot of connected equipment / 3 stage metered current monitoring and battery charge status LEDs / Dataline surge suppression for dialup, DSL or network ethernet connection / Mains power and voltage regulation LEDs / Audible Alarm / Self-test / Fault-tolerant auto-bypass mode / LED display panel easily rotates for better viewing in rackmount or tower configurations / 4 post rackmount accessories / 2-9USTAND tower kit and 2POSTRMKITWM two post rackmount hardware accessories available / Field replaceable, hot swappable internal batteries and external battery packs / Attractive all-black UPS design / Two year warranty with $250,000 connected equipment insurance / Extended warranty and service contracts available.

Features:

• SmartOnline high performance UPS system is ideal for critical voice, data, medical and industrial network applications
• True on-line, double-conversion UPS provides perfectly regulated sine wave output within 2% of 110/120V (user selectable) under all usage conditions
• Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
• Removes harmonic distortion, fast electrical impulses, frequency variations and other hard to solve power problems not addressed by other UPS types
• Corrects line voltage conditions as low as 65V and as high as 138V back to selectable 110/120V (+/-2%) values
• Standard internal battery set offers 17 minutes runtime at half load (1200W) and 6 minutes at full load (2400W)
• Expandable battery runtime with optional BP72V15-2U and BP72V28RT-3U external battery packs
• Compact rackmount form factor installs using only 3 rack spaces (3U) with a maximum installed depth of 26 inches
• Ships with all mounting accessories for 4 post rackmount installation
• Optional 2POSTRMKITWM enables 2 post rackmount installation
• Optional 2-9USTAND accessory enables small-footprint upright tower placement
• Fault tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS suffers internal failure and requires maintenance
• Network interfaces support simultaneous communications via built-in USB, DB9 serial / contact-closure and SNMPWEBCARD slot
• HID compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.
• Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
• UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test, load bank output power control and remote reboot, UPS nominal voltage adjustment and UPS line to battery power voltage set points
• Built-in Emergency Power Off (EPO) interface with cable
• NEMA L5-30P input plug / NEMA 5-15/20R, L5-20R & L5-30R output receptacles
• Integrated 2 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks (each bank has four outlets)
• Front panel LEDs offer current monitoring and battery charge level information
• UPS ships fully assembled in full compliance with DOT regulations; no time consuming connection of internal batteries by user required
• Single line TEL/DSL or network ethernet line surge suppression
• 2 year manufacturer's product warranty; $250,000 Ultimate Lifetime Insurance

Typical Applications:

Ideal for protection of critical 120V equipment in server rooms, internetworking closets and telecommunications systems in rackmount or tower applications. Common applications include corporate or departmental servers, workstations, hubs, routers, bridges, CAD/CAM workstations, concentrators, IP telephony and traditional PBX switching systems.

Options & Accessories:

• External battery pack: BP72V28RT-3U, BP72V15-2U
• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
• AS400/i Series Shutdown Cable Kit: AS400 CABLE KIT
• Dataline protectors: DNET1, DTEL2, DCATV
• Circuit Tester: CT120
• Rack enclosures: Rack Systems
• Power distribution: PDU1215, PS7224
• Two Post Rackmount Kit: 2POSTRMKITWM
• Tower Stands: 2-9USTAND
• Extended warranties: 3 Year WEXT3-2200-3000, 5 Year WEXT5-2200-3000 

Package Includes:

• SU3000RTXL3U UPS System
• PowerAlert Software and Cabling
• Mounting hardware for 4 post rack enclosures
• Instruction manual with warranty information

• 3000VA online 3U expandable rack / tower UPS
• Enhanced serial communications port and SNMP/Web card slot
• Maintains output within 2% of selectable 200/208/220/230/240V nominal during overvoltages to 275 and brownouts as low as 130V
• 8 outlets (6-15/20, L6-20)
• Fault tolerant auto-bypass
• $250,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)

Tripp Lite's high voltage Smart Online SU3000RTXL3UHV on-line, double conversion UPS protects critical server, networking or telecommunications equipment from blackouts, voltage fluctuations and surges. Multi-use form factor occupies only 3 rack spaces (3U) in standard 19 inch rackmount configuration and includes tower stands to support upright placement. Large capacity 3kVA / 2400 watt UPS continuously converts incoming AC to DC, then back to perfect sine wave AC output at selectable 200/208/220/230/240V AC (+/-2%) output. Removes harmonic distortion, fast electrical impulses, frequency fluctuations and other hard-to-solve power problems not addressed by other UPS types. True sine wave output and zero transfer time offers guaranteed compatibility with all high-voltage equipment types. Includes 6 outlets arranged in two individually switchable load banks plus 2 L6-20 outlets. These outlet banks can be independently controlled via software interface to selectively reboot remote equipment, or shed less critical loads to extend battery runtime for more critical equipment. Battery support can be extended indefinitely through the addition of external 2U or 3U rackmount battery packs (part# BP72V15-2U limit 1 / BP72V28-3U multi-pack compatible). Includes slot for internal SNMP/web card, plus DB9 enhanced serial monitoring port for unattended shutdown, remote control and monitoring of UPS system and power data. Compatible with Tripp Lite's WatchDog™ Service Monitoring/Reboot Software.

Features:

• True on-line, double conversion UPS provides pure, sine wave AC output at all times
• Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
• Removes harmonic distortion, electrical impulses, frequency variations and other hard to solve power problems
• Accepts input voltages between 160 and 275 (130 to 275 at loads under 70%), regulating output to selectable 200/208/220/230/240V +/-2%
• 3000VA / 2400 watt power capacity with 8 total outlets (6 NEMA6-15/20R & 2 NEMAL6-20R)
• Standard internal battery set provides 17 minutes runtime at half load
• Expandable runtime with multiple external battery packs (part# BP72V15-2U limit 1 / BP72V28-3U multi-pack compatible)
• Innovative design makes unit adaptable for rackmount, tower, or stacking applications
• Uses only 3 rack spaces (3U) in standard 19 inch rack
• DB9 serial port for network interface; SNMP compatible
• Slot for optional SNMP/web card (part# SNMPWEBCARD)
• PowerAlert unattended shutdown software and 6 ft. network cable included
• Compatible with Tripp Lite's Watchdog Service Monitoring/Reboot Software
• Fault tolerant auto-bypass maintians continuous utility output to connected equipment, even in cases where the UPS is overloaded or suffers an internal failure that requires service
• Diagnostic LEDs
• Battery replacement door
• Mounting hardware included for 4 post rack enclosures, 2 post telecom rack compatible with separate purchase 2POSTRMKITWM accessory
• $250,000 Ultimate Lifetime connected equipment insurance
• 2 year manufacturer's product warranty

Typical Applications:

Ideal for protection of critical high-voltage equipment in server rooms, internetworking closets and telecommunications systems in rackmount or tower applications. Common applications include corporate or departmental servers, workstations, hubs, routers, bridges, CAD/CAM workstations, concentrators, IP telephony and traditional PBX switching systems.

Options & Accessories:

• External battery packs: BP72V15-2U (limit 1), BP72V28RT-3U (multi-pack compatible)
• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
• AS400/i Series Shutdown Cable Kit: AS400 CABLE KIT
• Dataline protectors: DNET1, DTEL2, DCATV
• Rack enclosures: Rack Systems
• Power Distribution: PDU12IEC
• Two Post Rackmount Kit: 2POSTRMKITWM
• Extended warranties: 3 Year WEXT3-2200-3000, 5 Year WEXT5-2200-3000 

Package Includes:

• SU3000RTXL3UHV Rack-Tower UPS System
• PowerAlert Software and cabling
• Mounting hardware for 4 post rackmount enclosures / tower stands included
• Warranty information
• Instruction manual

• 3000VA / 3.0 kVA high power density, on-line, double-conversion, extended-run 3U rack / tower UPS - with large internal battery set for longer standard runtime
• Maintains sine-wave 110/120V +/-2% output during overvoltages to 138 and brownouts as low as 65V (50/60Hz auto-sensing)
• Simultaneous communications via HID compliant USB port, serial port, SNMP/Web card slot and EPO interface
• Fault tolerant auto-bypass mode, current monitoring and switched PDU control via 2 switchable output load banks
• Input: NEMA L5-30P (120V) / Output: 4 NEMA5-15R, 4 NEMA5-15/20R & 1 NEMA L5-30R
• 2 year product warranty / $250,000 Ultimate Lifetime Insurance (USA & Canada only)

3000VA high power density on-line, double-conversion UPS system for critical server, network and telecommunications equipment / Special "XR" version offers larger internal batteries than standard "XL" model / 3U rackmount form factor with an installed depth of 26 inches / Expandable battery runtime with optional BP72V15-2U and BP72V28RT-3U external battery packs / Full time sine wave 110 or 120V +/-2% output / Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output / Operates continuously without using battery power during brownouts to 65V and overvoltages to 138V / NEMA L5-30P input plug / NEMA 5-15, NEMA 5-15/20R and NEMA L5-30R output receptacles / Network-grade AC surge and noise suppression / Zero transfer time between AC and battery operation / Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot / Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability / HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X / Supports simultaneous detailed monitoring of equipment load levels, self-test data and mains power conditions via all 3 network interfaces at once / Includes PowerAlert monitoring software and complete cabling / Emergency Power Off (EPO) interface / Integrated two bank PDU switching supports load shedding and remote-reboot of connected equipment / 3 stage metered current monitoring and battery charge status LEDs / LED display panel easily rotates for better viewing in rackmount or tower configurations / Dataline surge suppression for dialup, DSL or network ethernet connection / Mains power and voltage regulation LEDs / Audible Alarm / Self-test / Fault-tolerant auto-bypass mode / 4 post rackmount accessories / 2-9USTAND tower kit and 2POSTRMKITWM two post rackmount hardware accessories available / Field replaceable, hot swappable internal batteries and external battery packs / Attractive all-black UPS design / Two year warranty with $250,000 connected equipment insurance / Extended warranty and service contracts available.

Features:

• SmartOnline high power density UPS system is ideal for critical voice, data, medical and industrial network applications
• Special "XR" version offers larger internal batteries for longer run times than standard "XL" model
• True on-line, double-conversion UPS provides perfectly regulated sine wave output within 2% of 110/120V (user selectable) under all usage conditions
• Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
• Removes harmonic distortion, fast electrical impulses, frequency variations and other hard to solve power problems not addressed by other UPS types
• Corrects line voltage conditions as low as 65V and as high as 138V back to selectable 110/120V (+/-2%) values
• Standard internal battery set offers 33 minutes runtime at half load (1200W) and 14 minutes at full load (2400W)
• Optional BP72V15-2U external battery pack increases runtime to 60 minutes at half load (1200W) and 30 minutes at full load (2400W /limit 1)
• Optional BP72V28RT-3U external battery pack increases runtime to 94 minutes at half load (1200W) and 41 minutes at full load (2400W / multi-pack compatible)
• Compact rackmount form factor installs using only 3 rack spaces (3U) with a maximum installed depth of 26 inches
• Ships with all mounting accessories for 4 post rackmount installation
• Optional 2POSTRMKITWM enables 2 post rackmount installation
• Optional 2-9USTAND accessory enables small-footprint upright tower placement
• Fault tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS suffers internal failure and requires maintenance
• Network interfaces support simultaneous communications via built-in USB, DB9 serial / contact-closure and SNMPWEBCARD slot
• HID compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
• Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
• UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test, load bank output power control and remote reboot, UPS nominal voltage adjustment and UPS line to battery power voltage set points
• Built-in Emergency Power Off (EPO) interface with cable
• NEMA L5-30P input plug / NEMA 5-15/20R & NEMA L5-20R output receptacles
• Integrated 2 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks (each bank has four outlets)
• Front panel LEDs offer current monitoring and battery charge level information
• UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user required
• Single line TEL/DSL or network ethernet line surge suppression
• 2 year manufacturer's product warranty, $250,000 Ultimate Lifetime Insurance

Typical Applications:

Ideal for protection of critical 120V equipment in server rooms, internetworking closets and telecommunications systems in rackmount or tower applications. Common applications include corporate or departmental servers, workstations, hubs, routers, bridges, CAD/CAM workstations, concentrators, IP telephony and traditional PBX switching systems.

Options & Accessories:

• External battery pack: BP72V28RT-3U, BP72V15-2U
• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
• AS400/i Series Shutdown Cable Kit: AS400 CABLE KIT
• Dataline protectors: DNET1, DTEL2, DCATV
• Circuit Tester: CT120
• Rack enclosures: Rack Systems
• Power distribution: PDU1215, PS7224
• Two Post Rackmount Kit: 2POSTRMKITWM
• Tower Stands: 2-9USTAND
• Extended warranties: 3 Year WEXT3-2200-3000, 5 Year WEXT5-2200-3000

Package Includes:

• SU3000RTXR3U SmartOnline High Power Density UPS System
• PowerAlert Software CD and cabling
• Owner's manual with warranty information

• 5000VA online 7U rack / tower UPS (3U Power Module + 2U Transformer Module + 2U Battery Pack)
• Enhanced serial communications ports, SNMP/Web card slot and EPO jack
• Maintains 208V - PLUS 120V output +/-2% during brownouts to 156 and overvoltages to 276V
• Expandable runtime with optional external battery packs
• $250,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)

Tripp Lite 5kVA Smart Online RM UPS. 5000VA on-line, double-conversion UPS for server, network and telecommunications equipment. Maintains battery-derived AC output during blackouts with active, full-time power conditioning. Fault-tolerant auto-bypass prevents unexpected service interruptions during overload or internal fault conditions. 3U power module, 2U transformer module and 2U battery pack install in 7 rack spaces. Full-time sine wave output within 2% of selectable 208V and simultaneous 120V AC. Corrects brownouts to 156V and overvoltages to 276V. Frequency regulation locks output power to 50/60Hz (+/-0.2%). Expandable runtime with optional rackmount external battery packs. Dual-conversion UPS converts raw input from AC to DC, then back to perfect sine wave AC output with enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types. Network-grade AC surge and noise suppression. Network management interfaces include 2 DB9 ports and SNMPWEBCARD slot. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs and LCD readout with scroll controls support visual monitoring of all major UPS functions. Audible alarm. Self test. 4-post rackmount accessories included; 2-9USTAND and 2POSTRMKITWM accessories available. L6-30P plug-in connection; built-in output receptacles include two L6-30R, two L6-20R and twelve 5-15/20R. Power Distribution Unit (PDU) options supported. Field-replaceable, hot-swappable external battery packs. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.

Features:

• True online, double-conversion UPS provides pure, full-time sine wave AC output free of surges, voltage fluctuations and line noise
• 5000VA / 3500 watt output power capacity with dual high / low voltage output compatible with 200-240V and 120V applications simultaneously
• 3U power module, 2U transformer module and 2U battery pack installs in any 19 inch rack enclosure using only 7 rack spaces
• Dual conversion UPS actively converts raw input from AC to DC, then back to perfect sine wave AC output with enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types
• Provides perfectly regulated, sine wave output power free of line noise, transient surges and frequency variation for the most efficient operation of critical servers, networking and telecommunications equipment
• Accepts input voltages between 156 and 276, regulating output within 2% of 208 - plus 120V nominal voltage
• Supports connected equipment during blackouts for 20/8 minutes at half/full load levels, runtime is further expandable with optional external battery packs
• Network interfaces support simultaneous communications via 2 DB9 ports and SNMPWEBCARD slot
• Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
• Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test and output power control
• Built-in Emergency Power Off (EPO) interface with cable
• Includes 17 built-in output receptacles (3 L6-30R w/one L6-30R used for transformer connection, 2 L6-20R, 12 NEMA 5-15/20R)
• L6-30P input plug-in connection
• Front panel LEDs and LCD readout with scroll button enables visual confirmation of all major UPS functions and current site electrical conditions
• Front panel switches enable power on/off control, self-test and alarm cancel functions
• Included adjustable mounting rails support installation in 4 post 19 inch rack enclosures, optional 2POSTRMKITWM supports 2 post rackmount installation
• UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user is required
• Fault-tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS is overloaded or suffers an internal failure that requires service
• 2 year manufacturer's product warranty, $250,000 Ultimate Lifetime Insurance (USA & Canada only)

Typical Applications:

Ideal for protection of sensitive electronics in any application calling for upright tower or 19 inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.

Options & Accessories:

• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
• AS400/i Series Shutdown Cable Kit: AS400 CABLE KIT
• External battery pack: BP240V10RT3U
• Tower Stands: 2-9USTAND
• Dataline protectors: DNET1, DTEL2, DCATV
• Two Post Rackmount Kit: 2POSTRMKITWM (3 required)
• Extended warranties: 3 Year WEXT3-5000, 5 Year WEXT5-5000

Package Includes:

• SU5000RT3U system includes one 3U power module, one 2U step-down isolation transformer module and one 2U external battery module
• PowerAlert UPS management software and complete cabling
• Mounting hardware to support each module in 4-post rackmount enclosures
• Warranty information
• Instruction manual

• 5000VA online 5U rack / tower UPS (3U Power Module + 2U Battery Pack)
• Enhanced serial communications ports, SNMP/Web card slot and EPO jack
• Maintains 200, 208, 220, 230 or 240V output +/-2% during brownouts to 156 and overvoltages to 276V
• Expandable runtime with optional external battery packs
• $250,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)

Tripp Lite 5kVA Smart Online RM UPS. 5000VA on-line, double-conversion UPS for server, network and telecommunications equipment. Maintains battery derived AC output during blackouts with active, full-time power conditioning. Fault-tolerant auto-bypass prevents unexpected service interruptions during overload or internal fault conditions. 3U power module and 2U battery pack install in 5 rack spaces. Full-time sine wave output within 2% of selectable 200/208/220/230/240V AC. Corrects brownouts to 156V and overvoltages to 276V. Frequency regulation locks output power to 50/60Hz (+/-0.2%) / Expandable runtime with optional rackmount external battery packs. Double-conversion UPS converts raw input from AC to DC, then back to perfect sine wave AC output with enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types. Network-grade AC surge and noise suppression. Network management interfaces include 2 DB9 ports and SNMPWEBCARD slot. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs and LCD readout with scroll controls support visual monitoring of all major UPS functions. Audible alarm. Self test. 4-post rackmount accessories included; 2-9USTAND and 2POSTRMKITWM accessories available. L6-30P plug-in connection; built-in L6-30 & L6-20 outlets. Power Distribution Unit (PDU) options supported. Field-replaceable, hot-swappable external battery packs. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.

Features:

• True online, double-conversion UPS provides pure, full-time sine wave AC output free of surges, voltage fluctuations and line noise
  
  # 5000VA / 3500 watt output power capacity compatible with 200-240V applications at 50/60 Hz
  
  # 3U power module and 2U battery pack installs in any 19 inch rack enclosure using only 5 rack spaces
  
  # Double conversion UPS actively converts raw input from AC to DC, then back to perfect sine wave AC output with enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types
  
  # Provides perfectly regulated, sine wave output power free of line noise, transient surges and frequency variation for the most efficient operation of critical servers, networking and telecommunications equipment
  
  # Accepts input voltages between 156 and 276, regulating output within 2% of selected 200/208/220/230/240V nominal voltage
  
  # Supports connected equipment during blackouts for 20/8 minutes at half/full load levels. Runtime is further expandable with optional external battery packs
  
  # Network interfaces support simultaneous communications via 2 DB9 ports and SNMPWEBCARD slot
  
  # Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
  
  # Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test and output power control
  
  # Built-in Emergency Power Off (EPO) interface with cable
  
  # Includes 4 built-in output receptacles (2 L6-30R, 2 L6-20R)
  
  # L6-30P input plug-in connection
  
  # Front panel LEDs and LCD readout with scroll button enables visual confirmation of all major UPS functions and current site electrical conditions
  
  # Front panel switches enable power on/off control, self-test and alarm cancel functions
  
  # Included adjustable mounting rails support installation in 4 post 19 inch rack enclosures. Optional 2POSTRMKITWM supports 2 post rackmount installation
  
  # UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user is required
  
  # Fault-tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS is overloaded or suffers an internal failure that requires service
  
  # 2 year manufacturer's product warranty, $250,000 Ultimate Lifetime Insurance (USA & Canada only)

Typical Applications:

Ideal for protection of sensitive electronics in any application calling for upright tower or 19 inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.

Options & Accessories:

• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
  
  # AS400/iSeries Shutdown Cable Kit: AS400 CABLE KIT
  
  # External battery pack: BP240V10RT3U
  
  # Tower Stands: 2-9USTAND
  
  # Dataline protectors: DNET1, DTEL2, DCATV
  
  # Two Post Rackmount Kit: 2POSTRMKITWM (2 required)
  
  # Extended warranties: 3 Year WEXT3-5000, 5 Year WEXT5-5000

• 5000VA / 5kVA on-line, double-conversion, extended run, 4U all-in-one rack / tower UPS
• Maintains dual 208/120 or 240/120V output +/-3% during brownouts and overvoltages (4 wire split-phase input)
• Simultaneous use of HID compliant USB port, serial port, SNMP/Web card slot, and EPO interface - front panel LCD digital display for real-time site electrical and detailed UPS operating parameters
• Detachable plug & outlet panel with auto/manual bypass and fault tolerant design enables hot-swap UPS replacement without powering off connected equipment
• Expandable runtime with optional BP192V12-3U external battery packs
• $250,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)

Tripp Lite 5kVA SmartOnline Hot-Swappable Modular Rack/Tower UPS. 5000VA on-line, double-conversion UPS for server, network and telecommunications equipment. Maintains battery-derived AC output during blackouts with active, full-time power conditioning. Fault tolerant auto-bypass prevents unexpected service interruptions during overload or internal fault conditions. Single all-in-one housing installs in 4 rack spaces (4U). Upright tower installation with optional 2-9USTAND accessory. 2-post rackmount installation with optional 2POSTRMKITWM. Full-time sine wave output within 3% of selectable 208/120 or 240/120V AC. Corrects brownouts and overvoltages from 65V to 140V (L-N). Expandable runtime with optional BP192V12-3U rackmount external battery packs. Dual-conversion UPS converts raw input from AC to DC, then back to perfect sine wave AC output with enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types. Network-grade AC surge and noise suppression. Network management interfaces include combination RS-232 enabled and contact closure serial port, enhanced USB port and SNMPWEBCARD slot. Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and mains power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs and LCD readout with scroll controls support visual monitoring of all major UPS functions. LED/LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm. Self test. 4-post rackmount accessories. L14-30P split phase 4 wire plug-in connection; two L6-30R, two L6-20R and eight 5-15/20R output receptacles. Input cord and outlets are mounted on a detachable backplate with manual bypass switch to enable hot-swappable UPS replacement without powering off connected equipment. Optional SUPDM56HW detachable backplate accessory enables hardwire input-output connections to the UPS. Additional external Power Distribution Unit (PDU) options available. Internal batteries and optional external battery packs are field replaceable and hot swappable. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.

Features:

• True on-line, double-conversion UPS provides pure, full-time sine wave AC output free of surges, voltage fluctuations and line noise
• 5000VA / 3800 watt output power capacity with dual voltage output of 208/120 or 240/120V
• 4U all-in-one high power density housing supports rackmount installation in only 4 rack spaces
• Dual conversion UPS actively converts raw input from AC to DC, then back to perfect sine wave AC output with enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types
• Input cord and outlets are mounted on a detachable backplate with manual bypass switch to enable hot-swappable UPS replacement without powering off connected equipment
• Optional SUPDM56HW detachable backplate accessory enables hardwire input-output connections to the UPS
• Provides perfectly regulated, sine wave output power free of line noise, transient surges and frequency variation for the most efficient operation of critical servers, networking and telecommunications equipment
• Maintains output within 3% of selected 208/120 or 240/120V nominal voltage during brownouts and overvoltages
• Supports connected equipment during blackouts for 17/8 minutes at half/full load levels, runtime is further expandable with optional external battery packs
• Network interfaces support simultaneous communications via DB9 port, USB port and SNMPWEBCARD slot
• Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
• Communication ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test and output power control
• Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.
• Built-in Emergency Power Off (EPO) interface with cable
• Includes 12 built-in output receptacles (2 L6-30R, 2 L6-20R, 8 NEMA 5-15/20R)
• L14-30P split phase, 4 wire plug-in connection (featured on included detachable PDU). Optional SUPDM56HW hardwire input/output PDU available separately
• Front panel LEDs and LCD readout with scroll button enables visual confirmation of all major UPS functions and current site electrical conditions
• Front panel switches enable power on/off control, self-test and alarm cancel functions
• Included adjustable mounting rails support installation in 4 post 19-inch rack enclosures
• Optional 2-9USTAND set of tower stands supports upright tower installation
• Optional 2POSTRMKITWM accessory enables 2-post rackmount installation
• UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user is required
• Fault-tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS is overloaded or suffers an internal failure that requires service
• Detachable PDU with built-in manual bypass switch enables hot-swappable UPS replacement without powering off connected equipment
• 2 year manufacturer's product warranty, $250,000 Ultimate Lifetime Insurance (USA & Canada only)

Typical Applications:

Ideal for protection of sensitive electronics in any application calling for upright tower or 19-inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.

Options & Accessories:

• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
• External battery pack: BP192V12-3U
• Hardwire Accessory Module: SUPDM56HW
• AS400/iSeries Shutdown Cable Kit: AS400 CABLE KIT
• Tower Stand Accessory: 2-9USTAND
• 2-Post Mounting Kit: 2POSTRMKITWM
• Dataline protectors: DNET1, DTEL2, DCATV
• Extended warranties: 3 Year WEXT3-5000, 5 Year WEXT5-5000
• On-site warranties: 2 Year WOS2-5000, 3-Year WOS3-5000
• Start-up service only: WSTRTUP-5K

Package Includes:

• SU5000RT4U UPS System (with SUPDMB56 detachable PDU module)
• USB, DB9 and EPO cabling
• Rackmount installation kit for 4 post rack enclosures
• Owner's manual and warranty information

• 6000VA online 9U rack / tower UPS (3U Power Module + 3U Step-down Transformer + 3U Battery Pack)
• Enhanced serial communications ports, SNMP/Web card slot and EPO jack
• Maintains 208 and simultaneous 120V output +/-2% during brownouts to 156 and overvoltages to 276V
• Fault tolerant manual and auto bypass modes
• Expandable runtime with optional BP240V10RT3U battery packs
• $250,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)

Tripp Lite 6kVA Smart Online RM UPS - 6000VA. The SU6000RT3U on-line, double-conversion UPS protects server, networking or telecommunications equipment from blackouts, voltage fluctuations and surges in a compact tower / rackmount housing. In a rack configuration, the power module, step-down transformer, and battery pack occupy only 3 rack spaces each (9U total). Upright tower placement of entire system supported with included tower stands. Large capacity 6000VA/4200 watt power module double-conversion technology converts raw input AC to DC, then resynthesizes it back to perfect sine wave AC output within 2% of user-selectable 208V and 120V AC output voltages. Frequency regulation locks output power to 50/60Hz (+/-0.2 Hz), removing harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types. Perfectly regulated, continuous sine wave output with zero transfer time offers guaranteed uptime and compatibility with all equipment types. Hardwire input and output connections support a variety of permanent or PDU style power connections. Battery support can be extended through the addition of external battery packs (part# BP240V10RT3U). Includes slot for internal SNMP/WEB card, plus DB9 contact-closure, and DB9 enhanced serial monitoring ports for unattended shutdown, remote control and monitoring of UPS system and power data.

Features:

• True on-line, double conversion UPS provides pure, sine wave AC output at all times
• Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
• Removes harmonic distortion, electrical impulses, frequency variations and other hard to solve power problems
• 6000VA / 4200 watt power capacity with hardwire input / output connections
• Accepts input voltages between 156 and 276, regulating output within 2% of selectable 208 and 120V AC output
• Standard included 3U battery pack provides 37 minutes runtime at half load (3000VA) and 15 minutes at full load (6000VA)
• Expandable runtime with multiple external battery packs (part# BP240V10RT3U)
• Innovative design makes unit adaptable for rackmount, tower, or stacking applications
• Power module and battery pack require only 3 rack spaces each (9U total rack space usage)
• DB9 serial port for network interface; SNMP compatible
• Slot for optional SNMP/web card SNMP/Web card for accessory slot (SNMPWEBCARD)
• PowerAlert unattended shutdown software and 6 ft. network cable included
• Fault tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS is overloaded or suffers an internal failure that requires service
• Manual bypass switch on the transformer module allows users to disconnect, remove, and replace the power module while maintaining continuous utility power to connected equipment
• Diagnostic LEDs
• Mounting hardware included with each 3U module for 4 post rackmount installation, 2 post telecom rack compatible with separate purchase 2POSTRMKITWM accessory (3 required)
• Includes RJ11 EPO (emergency power off) port and interconnection cable
• $250,000 Ultimate Lifetime connected equipment Insurance (USA & Canada Only)
• 2 year manufacturers product warranty

Typical Applications:

Ideal for protection of critical 208V and 120V equipment in server rooms, internetworking closets and telecommunications systems in rackmount or tower applications. Common applications include corporate or departmental servers, workstations, hubs, routers, bridges, CAD/CAM workstations, concentrators, IP telephony and traditional PBX switching systems.

Options & Accessories:

• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
• External battery pack: BP240V10RT3U
• AS400/iSeries Shutdown Cable Kit: AS400 CABLE KIT
• Tower Stands: 2-9USTAND
• Dataline protectors: DNET1, DTEL2, DCATV
• Input line cord SU30ACORD enables plug in connection to L6-30 208V 30A wall socket for UPS systems supporting hardwire input
• Two Post Rackmount Kit: 2POSTRMKITWM (3 required)
• Extended warranties: 3 Year WEXT3-SU6000, 5 Year WEXT5-SU6000
• Corded backplate outlet kit: SUPDM12, SUPDM13, SUPDM15, SUPDM16
• Start-up service plus on-site warranties: 2 Year WOS2-6K, 3-Year WOS3-6K, 5 Year WOS5-6K
• Start-up service only: WSTRTUP-6-10K

Package Includes:

• SU6000RT3U system includes 1 3U power module, 1 3U step-down isolation transformer and 1 3U battery pack
• PowerAlert UPS management software and complete cabling
• Mounting hardware to support each 3U module in 4 post rackmount enclosures / tower stands
• Warranty information
• Instruction manual

• 6000VA online 6U rack / tower UPS (3U Power Module + 3U Battery Pack)
• Enhanced serial communications ports, SNMP/Web card slot and EPO jack
• Maintains 200, 208, 220, 230 or 240V output +/-2% during brownouts to 156 and overvoltages to 276V
• Fault tolerant manual and auto bypass modes
• Expandable runtime with optional BP240V10RT3U battery packs
• $250,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)

Tripp Lite 6kVA Smart Online RM UPS - 6000VA. The Smart Online SU6000RT3UHV double-conversion UPS protects server, networking or telecommunications equipment from blackouts, voltage fluctuations and surges in a compact tower / rackmount housing. In a rack configuration, the power module and battery pack occupy only 3 rack spaces each (6U total). Upright tower placement of entire system supported with included tower stands. Large capacity 6000VA/4200 watt power module double-conversion technology converts raw input AC to DC, then resynthesizes it back to perfect sine wave AC output within 2% of user-selectable 200/208/220/230/240V AC output voltages. Frequency regulation locks output power to 50/60Hz (+/-0.2 Hz), removing harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types. Perfectly regulated, continuous sine wave output with zero transfer time offers guaranteed uptime and compatibility with all equipment types. Hardwire input and output connections support a variety of permanent or PDU style power connections. Battery support can be extended through the addition of external battery packs (part# BP240V10RT3U). Includes slot for internal SNMP/WEB card, plus DB9 contact-closure, and DB9 enhanced serial monitoring ports for unattended shutdown, remote control and monitoring of UPS system and power data.

Features:

• True on-line, double conversion UPS provides pure, sine wave AC output at all times
• World-wide compatibility with Euro 50Hz and High Voltage North American 60Hz power
• Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
• Removes harmonic distortion, electrical impulses, frequency variations and other hard to solve power problems
• 6000VA / 4200 watt power capacity with hardwire input / output connections
• Accepts input voltages between 156 and 276, regulating output within 2% of selectable 200/208/220/230/240v AC output
• Standard included 3U battery pack provides 37 minutes runtime at half load (3000VA) and 15 minutes at full load (6000VA)
• Expandable runtime with multiple external battery packs (part# BP240V10RT3U)
• Innovative design makes unit adaptable for rackmount, tower, or stacking applications
• Power module and battery pack require only 3 rack spaces each (6U total rack space usage)
• DB9 serial port for network interface; SNMP compatible
• Slot for optional SNMP/web card (part# SNMPWEBCARD)
• PowerAlert unattended shutdown software and 6 ft. network cable included
• Fault tolerant auto-bypass maintians continuous utility output to connected equipment, even in cases where the UPS is overloaded or suffers an internal failure that requires service
• Diagnostic LEDs
• Mounting hardware included with each 3U module for 4 post rackmount installation, 2 post telecom rack compatible with separate purchase 2POSTRMKITWM (2 required)
• Includes RJ11 EPO (emergency power off) port and interconnection cable
• $250,000 Ultimate Lifetime connected equipment Insurance (USA & Canada Only)
• 2 year manufacturers product warranty

Typical Applications:

Ideal for protection of critical 200/208/220/230/240v equipment in server rooms, internetworking closets and telecommunications systems in rackmount or tower applications. Common applications include corporate or departmental servers, workstations, hubs, routers, bridges, CAD/CAM workstations, concentrators, IP telephony and traditional PBX switching systems.

Options & Accessories:

• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
• External battery pack: BP240V10RT3U
• AS400/iSeries Shutdown Cable Kit: AS400 CABLE KIT
• Input line cord SU30ACORD enables plug in connection to L6-30 208V 30A wall socket for UPS systems supporting hardwire input
• Two Post Rackmount Kit: 2POSTRMKITWM (2 required)
• Extended warranties: 3 Year WEXT3-SU6000HV, 5 Year WEXT5-SU6000HV
• Corded backplate outlet kit: SUPDM11
• Start-up service plus on-site warranties: 2 Year WOS2-6K, 3-Year WOS3-6K
• Start-up service only: WSTRTUP-6-10K

Package Includes:

• SU6000RT3UHV system includes 1 3U power module and 1 3U battery pack
• PowerAlert UPS management software and complete cabling
• Mounting hardware to support each 3U module in 4 post rack enclosures / tower stands
• Warranty information
• Instruction manual

• 6000VA / 6kVA on-line, double-conversion, extended run, 4U all-in-one rack / tower UPS
• Maintains dual 208/120 or 240/120V output +/-3% during brownouts and overvoltages (4 wire split-phase input)
• Simultaneous use HID compliant USB port, serial port, SNMP/Web card slot and EPO interface - front panel LCD digital display for real-time site electrical and detailed UPS operating parameters
• Detachable plug & outlet panel with auto/manual bypass and fault tolerant design enables hot-swap UPS replacement without powering off connected equipment
• Expandable runtime with optional BP192V12-3U external battery packs
• $250,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)

Tripp Lite 6kVA SmartOnline Hot-Swappable Modular Rack/Tower UPS. 6000VA on-line, double-conversion UPS for server, network and telecommunications equipment. Maintains battery-derived AC output during blackouts with active, full-time power conditioning. Fault-tolerant auto-bypass prevents unexpected service interruptions during overload or internal fault conditions. Single all-in-one housing installs in 4 rack spaces (4U). Upright tower installation with optional 2-9USTAND accessory. 2 post rackmount installation with optional 2POSTRMKITWM. Full-time sine wave output within 3% of selectable 208/120 or 240/120V AC. Corrects brownouts and overvoltages from 65V to 140V (L-N). Expandable runtime with optional BP192V12-3U rackmount external battery packs. Converts raw input from AC to DC, then back to perfect sine wave AC output with enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types. Network-grade AC surge and noise suppression. Network management interfaces include combination RS-232 enabled and contact closure serial port, enhanced USB port and SNMPWEBCARD slot. Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs and LCD readout with scroll controls support visual monitoring of all major UPS functions. LED/LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm. Self test. 4-post rackmount accessories. L14-30P split phase 4 wire plug-in connection: two L6-30R, two L6-20R and eight 5-15/20R output receptacles. Input cord and outlets are mounted on a detachable backplate with manual bypass switch to enable hot-swappable UPS replacement without powering off connected equipment. Optional SUPDM56HW installable backplate accessory enables hardwire input-output connections. Optional external Power Distribution Unit (PDU) options available. Internal batteries and optional external battery packs are field replaceable and hot swappable. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.

Features:

• True online, double-conversion UPS provides pure, full-time sine wave AC output free of surges, voltage fluctuations and line noise
• 6000VA / 4200 watt output power capacity with dual voltage output of 208/120 or 240/120V
• 4U all-in-one high power density housing supports rackmount installation in only 4 rack spaces
• Dual conversion UPS actively converts raw input from AC to DC, then back to perfect sine wave AC output with enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types
• Input cord and outlets are mounted on a detachable backplate with manual bypass switch to enable hot-swappable UPS replacement without powering off connected equipment
• Optional SUPDM56HW installable backplate accessory enables hardwire input-output connections
• Provides perfectly regulated, sine wave output power free of line noise, transient surges and frequency variation for the most efficient operation of critical servers, networking and telecommunications equipment
• Maintains output within 3% of selected 208/120 or 240/120V nominal voltage during brownouts and overvoltages
• Supports connected equipment during blackouts for 24/9 minutes at half/full load levels, runtime is further expandable with optional external battery packs
• Network interfaces support simultaneous communications via DB9 port, USB port and SNMPWEBCARD slot
• Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
• Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test and output power control
• Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.
• Built-in Emergency Power Off (EPO) interface with cable
• Includes 12 built-in output receptacles (2 L6-30R, 2 L6-20R, 8 NEMA 5-15/20R)
• L14-30P split phase, 4 wire plug-in connection (featured on included detachable PDU). Optional SUPDM56HW hardwire input/output PDU available separately
• Front panel LEDs and LCD readout with scroll button enables visual confirmation of all major UPS functions and current site electrical conditions
• Front panel switches enable power on/off control, self-test and alarm cancel functions
• Included adjustable mounting rails support installation in 4 post 19 inch rack enclosures
• Optional 2-9USTAND set of tower stands supports upright tower installation
• Optional 2POSTRMKITWM accessory enables 2 post rackmount installation
• UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user is required
• Fault-tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS is overloaded or suffers an internal failure that requires service
• Detachable PDU with built-in manual bypass switch enables hot-swappable UPS replacement without powering off connected equipment
• 2 year manufacturer's product warranty, $250,000 Ultimate Lifetime Insurance (USA & Canada only)

Typical Applications:

Ideal for protection of sensitive electronics in any application calling for upright tower or 19-inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.

Options & Accessories:

• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
• External battery pack: BP192V12-3U
• AS400/iSeries Shutdown Cable Kit: AS400 CABLE KIT
• Hardwire Accessory Module: SUPDM56HW
• Tower Stand Accessory: 2-9USTAND
• 2 Post Mounting Kit: 2POSTRMKITWM
• Dataline protectors: DNET1, DTEL2, DCATV
• Extended warranties: 3 Year WEXT3-SU6000, 5 Year WEXT5-SU6000
• Start-up service plus on-site warranties: 2 Year WOS2-6K, 3-Year WOS3-6K, 5 Year WOS5-6K
• Start-up service only: WSTRTUP-6-10K

Package Includes:

• SU6000RT4U UPS System (with SUPDMB56 detachable PDU module)
• USB, DB9 and EPO cabling
• Rackmount installation kit for 4 post rack enclosures
• Owner's manual and warranty information

• 8000VA (8kVA) on-line 6U rack/tower UPS with expandable runtime (3U power module + 3U battery pack)
• Detachable PDU with manual bypass switch enables hot-swap UPS replacement without powering off connected loads
• 200/208/230/240V selectable input/output voltage
• 2% output voltage regulation over an input voltage range of 156V to 276V
• Enhanced serial communications ports, SNMP/Web Card Slot and EPO interfaces
• $250,000 Ultimate Lifetime Insurance (USA & Canada only).

8000VA (8kVA) on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 6 rack spaces (3U power module and 3U battery pack). Maximum installed rack depth of 32.5 in. Expandable battery runtime with optional BP240V10RT3U external battery packs. Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output. Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V. Standard 3-wire 208V hardwire input connection; NEMA L6-30R and L6-20R output receptacles. Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without disrupting power to connected equipment. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot. Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC conversion, DC-to-AC conversion, bypass mode and output power status. LCD panel with scroll buttons offers detailed diagnostic test information at startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage and battery charge level. LED/LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories and 2-9USTAND tower kit included; 2POSTRMKITWM 2-post rackmount hardware accessories available. Field replaceable, hot-swappable power module and external battery packs. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.

Features:

• 8,000 VA (8kVA) on-line, double-conversion UPS system (High voltage input / High voltage output)
• Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without powering off connected equipment
• Installs in only 6 rack spaces (3U power module / 3U battery pack) with a maximum installed depth of 32.5 inches
• Offers 6 min. runtime at full load (8000VA/6400W) and 15 min. at half load (4000VA/3200W). Runtime is expandable with any number of optional BP240V10RT3U external battery packs
• Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output (user selectable)
• Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output
• Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V
• Standard 3-wire 208V hardwire input connection
• 2 x NEMA L6-30R and 4 x L6-20R output receptacles
• Detailed LCD panel with scroll buttons offers detailed diagnostic test information on startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage, battery charge level and more
• Network-grade AC surge and noise suppression
• Zero transfer time between AC and battery operation
• Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot
• Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling
• Emergency Power Off (EPO) interface
• Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC & DC-to-AC conversion, bypass mode and output power status.
• Fault-tolerant auto-bypass mode prevents loss of output during UPS fault conditions or excessive UPS loading
• 4-post rackmount and upright tower installation accessories included. 2POSTRMKITWM two post rackmount hardware accessories available
• Field replaceable, hot swappable power module and external battery packs
• Attractive all-black color scheme
• 2-year warranty; $250,000 connected equipment insurance
• Extended warranty and service contracts available

Typical Applications:

Ideal for protection of sensitive electronics in any application calling for upright tower or 19 inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems

Options & Accessories:

• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
• External battery pack: BP240V10RT3U
• AS400/iSeries Shutdown Cable Kit: AS400 CABLE KIT
• Two Post Rackmount Kit: 2POSTRMKITWM (qty 1 required for each 3U module)
• Hardwire input/Output PDU: SUPDM710HW
• Extended warranties: 3 Year WEXT3-SU10K, 5 Year WEXT5-SU10K
• Start-up service plus on-site warranties: 2 Year WOS2-10K, 3-Year WOS3-10K, 5 Year WOS5-10K
• Start-up service only: WSTRTUP-6-10K

Package Includes:

• 3U power module with detachable hot-swap PDU input/output panel and bypass switch
• 3U external battery pack
• Two sets of 4 post rackmount rails (one for each of the 3U components)
• One set of tower stands for upright tower configuration
• PowerAlert software, complete data cabling, user manual with warranty information

• 8,000VA (8kVA) on-line 8U rack/tower UPS with expandable runtime (3U Power Module + 3U Battery Pack + 2U step-down transformer)
• Detachable PDU with manual bypass switch enables hot-swap UPS replacement without powering off connected loads
• Maintains 208V and simultaneous 120V output
• 2% output voltage regulation over an input voltage range of 156 to 276
• Enhanced serial communications ports, SNMP/Web Card Slot and EPO interfaces
• $250,000 Ultimate Lifetime Insurance (USA & Canada only).

8,000VA (8kVA) on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 8 rack spaces (3U power module, 3U battery pack and 2U step-down transformer). Maximum installed rack depth of 32.5 in. Expandable battery runtime with optional BP240V10RT3U external battery packs. Full-time sine wave 208 and 120V +/-2% output. Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V. Standard 3-wire 208V hardwire input connection; NEMA L6-30R, L6-20R and NEMA 5-15/20R output receptacles. Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without disrupting power to connected equipment. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot. Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC conversion, DC-to-AC conversion, bypass mode and output power status. LCD panel with scroll buttons offers detailed diagnostic test information on startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage and battery charge level. LED/LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories and 2-9USTAND tower kit included; 2POSTRMKITWM two post rackmount hardware accessories available. Field replaceable, hot-swappable power module and external battery packs. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.

Features:

• 8,000 VA (8kVA) on-line, double-conversion UPS system (High voltage input / High AND low voltage output)
• Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without powering off connected equipment
• Installs in only 8 rack spaces (3U power module / 3U battery pack / 2U step-down transformer) with a maximum installed depth of 32.5 inches
• Offers 6 min. runtime at full load (8000VA/6400W) and 15 min. at half load (4000VA/3200W). Runtime is expandable with any number of optional BP240V10RT3U external battery packs
• Full-time sine wave 208V and simultaneous 120V +/-2% output
• Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output
• Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V
• Standard 3-wire 208V hardwire input connection
• 2 x NEMA L6-30R, 2 x L6-20R and 12 x 5-15/20R output receptacles
• Detailed LCD panel with scroll buttons offers detailed diagnostic test
• Network-grade AC surge and noise suppression
• Zero transfer time between AC and battery operation
• Includes slot for internal SNMP/web card, plus DB9 enhanced serial monitoring port, and contact closure port for unattended shutdown, remote control and monitoring of UPS system and power data
• Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling
• Emergency Power Off (EPO) interface
• Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC & DC-to-AC conversion, bypass mode and output power status.
• Fault-tolerant auto-bypass mode prevents loss of output during UPS fault conditions or excessive UPS loading
• 4 post rackmount and upright tower installation accessories included. 2POSTRMKITWM two post rackmount hardware accessories available
• Field replaceable, hot swappable power module and external battery packs
• Attractive all-black color scheme
• 2-year warranty: $250,000 connected equipment insurance
• Extended warranty and service contracts available

Typical Applications:

Ideal for protection of sensitive electronics in any application calling for upright tower or 19 inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems

Options & Accessories:

• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
• External battery pack: BP240V10RT3U
• AS400/iSeries Shutdown Cable Kit: AS400 CABLE KIT
• Two Post Rackmount Kit: 2POSTRMKITWM (qty 3 required)
• Extended warranties: 3 Year WEXT3-SU10K, 5 Year WEXT5-SU10K
• Start-up service plus on-site warranties: 2 Year WOS2-10K, 3-Year WOS3-10K, 5 Year WOS5-10K
• Start-up service only: WSTRTUP-6-10K

Package Includes:

• 3U power module with detachable hot-swap PDU input/output panel and bypass switch
• 3U external battery pack, 2U step-down transformer
• Three sets of 4 post rackmount rails (one for each of the 2U and 3U components)
• One set of tower stands for upright tower configuration
• PowerAlert software, complete data cabling, user manual with warranty information

• 8000VA (8kVA) on-line 6U rack/tower UPS with expandable runtime (3U power module + 3U battery pack)
• Detachable hardwired PDU with manual bypass switch enables hot-swap UPS replacement without powering off connected loads
• 200/208/230/240V selectable input/output voltage
• 2% output voltage regulation over an input voltage range of 156V to 276V
• Enhanced serial communication ports, SNMP/Web Card Slot and EPO interface
• $250,000 Ultimate Lifetime Insurance (USA & Canada only)

8000VA (8kVA) on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 6 rack spaces (3U power module and 3U battery pack). Maximum installed rack depth of 32.5 in. Expandable battery runtime with optional BP240V10RT3U external battery packs. Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output. Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V. Standard 3-wire 208V hardwire input and output connections. Detachable hardwire input-output PDU module with manual bypass switch enables hot-swap UPS replacement without disrupting power to connected equipment. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot. Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC conversion, DC-to-AC conversion, bypass mode and output power status. LCD panel with scroll buttons offers detailed diagnostic test information at startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage and battery charge level. LED/LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories and 2-9USTAND tower kit included; 2POSTRMKITWM 2-post rackmount hardware accessories available. Field replaceable, hot-swappable power module and external battery packs. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.

Features:

• 8,000 VA (8kVA) on-line, double-conversion UPS system (High voltage input / High voltage output)
• Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without powering off connected equipment
• Installs in only 6 rack spaces (3U power module / 3U battery pack) with a maximum installed depth of 32.5 inches
• Offers 6 min. runtime at full load (8000VA/6400W) and 15 min. at half load (4000VA/3200W). Runtime is expandable with any number of optional BP240V10RT3U or BP240V32 external battery packs
• Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output (user selectable)
• Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output
• Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V
• Standard 3-wire 208V hardwire input and output connections
• Detailed LCD panel with scroll buttons offers detailed diagnostic test information on startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage, battery charge level and more
• Network-grade AC surge and noise suppression
• Zero transfer time between AC and battery operation
• Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot
• Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling
• Emergency Power Off (EPO) interface
• Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC & DC-to-AC conversion, bypass mode and output power status
• Fault-tolerant auto-bypass mode prevents loss of output during UPS fault conditions or excessive UPS loading
• 4-post rackmount and upright tower installation accessories included. 2POSTRMKITWM two post rackmount hardware accessories available
• Field replaceable, hot swappable power module and external battery packs
• Attractive all-black color scheme
• 2-year warranty; $250,000 connected equipment insurance
• Extended warranty and service contracts available

Typical Applications:

Ideal for protection of sensitive electronics in any application calling for upright tower or 19 inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems

Options & Accessories:

• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
• External battery pack: BP240V10RT3U
• AS400/iSeries Shutdown Cable Kit: AS400 CABLE KIT
• Two Post Rackmount Kit: 2POSTRMKITWM (qty 1 required for each 3U module)
• Extended warranties: 3 Year WEXT3-SU10K, 5 Year WEXT5-SU10K
• Start-up service plus on-site warranties: 2 Year WOS2-10K, 3-Year WOS3-10K, 5 Year WOS5-10K
• Start-up service only: WSTRTUP-6-10K

Package Includes:

• 3U power module with detachable hot-swap PDU input/output panel and bypass switch
• 3U external battery pack
• Two sets of 4 post rackmount rails (one for each of the 3U components)
• One set of tower stands for upright tower configuration
• PowerAlert software, complete data cabling, user manual with warranty information

• 10,000VA/10kVA on-line 6U rack/tower UPS with expandable runtime (3U Power Module + 3U Battery Pack)
• Manual bypass switch and detachable PDU enable hot-swap UPS replacement without powering off connected loads
• 200, 208, 230 or 240V selectable input/output voltage
• 2% output voltage regulation over an input voltage range of 156-276V
• Enhanced serial communications ports, SNMP/Web Card Slot and EPO interfaces
• $250,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)

10,000VA (10kVA) on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 6 rack spaces (3U power module and 3U battery pack); maximum installed rack depth of 32.5 in. Expandable battery runtime with optional BP240V10RT3U external battery packs. Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output. Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without consuming battery power during brownouts to 156V and overvoltages to 276V. Standard 3-wire 208V hardwire input connection; NEMA L6-30R and L6-20R output receptacles. Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without disrupting power to connected equipment. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot. Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs provide at-a-glance confirmation of line power status, battery power status, AC-to-DC conversion, DC-to-AC conversion, bypass mode and output power status. LED/LCD display panel rotates for better viewing in rackmount or tower configurations. Detailed LCD panel with scroll buttons provides detailed diagnostic test information at startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage and battery charge level. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories and 2-9USTAND tower kit included; 2POSTRMKITWM 2-post rackmount hardware accessories available. Field-replaceable, hot-swappable power module and external battery packs. Attractive all-black color scheme. 2-year warranty; extended warranty and service contracts available. $250,000 connected equipment insurance.

Features:

• 10,000VA (10kVA) on-line, double-conversion UPS system (high-voltage input/high-voltage output)
• Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without powering off connected equipment
• Installs in only 6 rack spaces (3U power module/3U battery pack) with a maximum installed depth of 32.5 in.
• Offers 4 min. runtime at full load (10,000VA/8000W) and 10 min. at half load (5000VA/4000W). Runtime is expandable with any number of optional BP240V10RT3U external battery packs
• Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output (user selectable)
• Actively converts raw incoming AC power to DC, then re-converts output to completely regulated, filtered AC output
• Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V
• Standard 3-wire 208V hardwire input connection
• 4 x NEMA L6-20R and 2 x NEMA L6-30R output receptacles
• Detailed LCD panel with scroll buttons provides detailed diagnostic test information on startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage, battery charge level and more
• Network-grade AC surge and noise suppression
• Zero transfer time between AC and battery operation
• Includes slot for internal SNMP/web card, plus DB9 enhanced serial monitoring port, and contact closure port for unattended shutdown, remote control and monitoring of UPS system and power data
• Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling
• Emergency Power Off (EPO) interface
• Front panel LEDs provide at-a-glance confirmation of line power status, battery power status, AC-to-DC & DC-to-AC conversion, bypass mode and output power status
• Fault-tolerant auto-bypass mode prevents loss of output during UPS fault conditions or excessive UPS loading
• 4-post rackmount and upright tower installation accessories included; 2POSTRMKITWM 2-post rackmount hardware accessories available
• Field-replaceable, hot-swappable power module and external battery packs
• Attractive all-black color scheme
• 2-year warranty; extended warranty and service contracts available
• $250,000 connected equipment insurance

Typical Applications:

Ideal for protection of sensitive electronics in any application calling for upright tower or 19-in. rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems

Options & Accessories:

• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
• External battery pack: BP240V10RT3U
• AS400/iSeries Shutdown Cable Kit: AS400 CABLE KIT
• 2-Post Rackmount Kit: 2POSTRMKITWM (qty 1 required for each 3U module)
• Hardwire input/Output PDU: SUPDM710HW
• Extended warranties: 3 Year WEXT3-SU10K, 5 Year WEXT5-SU10K
• Start-up service plus on-site warranties: 2 Year WOS2-10K, 3-Year WOS3-10K, 5 Year WOS5-10K
• Start-up service only: WSTRTUP-6-10K

Package Includes:

• 3U power module with detachable hot-swap PDU input/output panel and bypass switch
• 3U external battery pack
• Two sets of 4-post rackmount rails (one for each of the 3U components)
• One set of tower stands for upright tower configuration
• PowerAlert Software, complete cabling, owner's manual with warranty information

• 10,000VA / 10kVA online 10U rack / tower UPS with expandable runtime (3U Power Module + 3U Battery Pack + QTY 2 -2u stepdown transformers)
• Manual Bypass Switch and detachable PDU enables hot-swap UPS replacement without powering off connected loads
• Maintains 208V and simultaneous 120V output
• 2% output voltage regulation over an input voltage range of 156 to 276
• Enhanced serial communications ports, SNMP/Web Card Slot and EPO interfaces
• $250,000 Ultimate Lifetime Insurance (USA & Canada only).

10,000 VA on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 10 rack spaces (3U power module, 3U battery pack and two 2U step-down transformers). Maximum installed rack depth of 32.5 in. Expandable battery runtime with optional BP240V10RT3U external battery packs. Full-time sine wave 208V and 120V +/-2% output. Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V. Standard 3-wire 208V hardwire input connection; NEMA L6-30R, L6-20R and 5-15/20R output receptacles. Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without disrupting power to connected equipment. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot. Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC conversion, DC-to-AC conversion, bypass mode and output power status. LED/LCD display panel easily rotates for better viewing in rackmount or tower configurations. LCD panel with scroll buttons offers detailed diagnostic test information at startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage and battery charge level. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories and 2-9USTAND tower kit included; 2POSTRMKITWM two post rackmount hardware accessories available. Field-replaceable, hot-swappable power module and external battery 2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.

Features:

• 10,000 VA on-line, double-conversion UPS system (high voltage input/high AND low voltage output)
• Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without powering off connected equipment
• Installs in only 10 rack spaces (3U power module, 3U battery pack, 2 x 2U step-down transformers) with a maximum installed depth of 32.5 inches
• Offers 4 min. runtime at full load (10,000VA/8000W) and 10 min. at half load (5000VA/4000W). Runtime is expandable with any number of optional BP240V10RT3U external battery packs
• Full-time sine wave 208V and simultaneous 120v +/-2% output
• Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output
• Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V
• Standard 3-wire 208V hardwire input connection
• 2 NEMA L6-30R, 2 L6-20R and 24 5-15/20R output receptacles
• Detailed LCD panel with scroll buttons offers detailed diagnostic test
• Network-grade AC surge and noise suppression
• Zero transfer time between AC and battery operation
• Includes slot for internal SNMP/web card, plus DB9 enhanced serial monitoring port, and contact closure port for unattended shutdown, remote control and monitoring of UPS system and power data
• Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling
• Emergency Power Off (EPO) interface
• Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC & DC-to-AC conversion, bypass mode and output power status.
• Fault-tolerant auto-bypass mode prevents loss of output during UPS fault conditions or excessive UPS loading
• 4-post rackmount and upright tower installation accessories included; 2POSTRMKITWM 2-post rackmount hardware accessories available
• Field-replaceable, hot-swappable power module and external battery packs
• Attractive all-black color scheme
• 2-year warranty; $250,000 connected equipment insurance
• Extended warranty and service contracts available

Typical Applications:

Ideal for protection of sensitive electronics in any application calling for upright tower or 19-in. rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems

Options & Accessories:

• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
• AS400/iSeries Shutdown Cable Kit: AS400 CABLE KIT
• External battery pack: BP240V10RT3U
• Two Post Rackmount Kit: 2POSTRMKITWM (qty 1 required for each 3U module)
• Extended warranties: 3 Year WEXT3-SU10K, 5 Year WEXT5-SU10K
• Start-up service plus on-site warranties: 2 Year WOS2-10K, 3-Year WOS3-10K, 5 Year WOS5-10K
• Start-up service only: WSTRTUP-6-10K

Package Includes:

• 3U power module with detachable hot-swap PDU input/output panel and manual bypass switch
• 3U external battery pack
• 2 x 2U step-down transformers
• Two sets of 4-post rackmount rails (one for each 3U component); one set of tower stands for upright tower installation
• PowerAlert Software, complete data cabling, user manual with warranty information

• 10,000VA (10kVA) / 8,000W on-line 9U rack / tower UPS (3U Power Module + 3U Step-down Transformer + 3U Battery Pack)
• Enhanced serial communications ports, SNMP/Web card slot and EPO jack
• Maintains 208V and simultaneous 120V output +/-2% during brownouts to 156 and overvoltages to 276V
• Fault tolerant manual and auto-bypass modes
• Expandable runtime with optional BP240V10RT3U battery packs
• $250,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)

Tripp Lite 10,000VA (10kVA) SmartOnline Rack/Tower UPS. The SmartOnline SU10KRT3U on-line, double conversion UPS protects server, networking or telecommunications equipment from blackouts, voltage fluctuations and surges in a compact tower/rackmount housing. In rack configuration, power module, step-down transformer and battery pack occupy only 3 rack spaces each (9U total). Upright tower placement of entire system supported with included tower stands. Large capacity 10,000VA/8,000W power module converts raw input AC to DC, then back to perfect sine wave AC output within 2% of 208V and 120V AC output voltages. Frequency regulation locks output power to 50/60Hz (+/-0.5 Hz), removing harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types. Perfectly regulated, continuous sine wave output with zero transfer time offers guaranteed compatibility with all equipment types. Hardwire input and output connections support a variety of permanent or PDU style power connections. Battery support can be extended through the addition of optional external 3U rackmount battery packs, sold separately (part# BP240V10RT3U). Includes slot for internal SNMP/Web card (part# SNMPWEBCARD), plus two DB9 enhanced serial and contact closure monitoring ports for unattended shutdown, remote control and monitoring of UPS system and power data.

Features:

• True on-line, double conversion UPS provides pure, sine wave AC output at all times
• Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
• Removes harmonic distortion, electrical impulses, frequency variations and other hard to solve power problems
• 10,000VA / 8,000W power capacity with hardwire input / output connections
• Accepts input voltages between 156 and 276, regulating output within 2% of 208V and 120V AC output
• Standard included 3U battery pack provides 10 minutes runtime at half load (5,000VA) and 4 minutes runtime at full load (10,000VA)
• Expandable runtime with multiple external battery packs, sold separately (part# BP240V10RT3U)
• Innovative design makes unit adaptable for rackmount, tower, or stacking applications
• In rack configuration, power module, step-down transformer and battery pack occupy only 3 rack spaces each (9U total)
• 2 DB9 serial ports for network interface; SNMP compatible
• Slot for optional SNMP/web card (part# SNMPWEBCARD)
• PowerAlert unattended shutdown software and 6 ft. network cable included
• Fault tolerant auto-bypass maintians continuous utility output to connected equipment, even in cases where the UPS is overloaded or suffers an internal failure that requires service
• Manual bypass switch on the transformer module allows users to disconnect, remove, and replace the power module while maintaining continuous utility power to connected equipment
• Diagnostic LEDs and LCD provide complete overview of operating conditions, UPS status and more
• Mounting hardware included with each 3U module for 4-post rackmount installation, 2-post telecom rack compatible with separate purchase of 2POSTRMKITWM accessory (3 required)
• Built-in Emergency Power Off (EPO) interface supports emergency shutoff in large facilities
• 2 year manufacturer's product warranty
• $250,000 Ultimate Lifetime connected equipment insurance

Typical Applications:

Ideal for protection of critical 208V and 120V equipment in server rooms, internetworking closets and telecommunications systems in rackmount or tower applications. Common applications include corporate or departmental servers, workstations, hubs, routers, bridges, CAD/CAM workstations, concentrators, IP telephony and traditional PBX switching systems.

Options & Accessories:

• External battery pack: BP240V10RT3U
• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
• AS400/iSeries Shutdown Cable Kit: AS400 CABLE KIT
• Two Post Rackmount Kit: 2POSTRMKITWM (3 required)
• Extended warranties: 3 Year WEXT3-SU10K, 5 Year WEXT5-SU10K
• Start-up service plus on-site warranties: 2 Year WOS2-10K, 3-Year WOS3-10K, 5 Year WOS5-10K
• Start-up service only: WSTRTUP-6-10K

Package Includes:

• SU10KRT3U UPS System (power module, hardwire PDU, step-down transformer module and battery pack)
• PowerAlert Software and cabling
• Mounting hardware for 4 post rackmount enclosures / tower stands
• Instruction manual with warranty information
• Flex conduit and wiring for connection between power module and transformer

• 10,000VA (10kVA) / 8,000W on-line 6U rack / tower UPS (3U Power Module + 3U Battery Pack)
• Enhanced serial communications ports, SNMP/Web card slot and EPO jack
• Maintains 200, 208, 220, 230 or 240V output +/-2% during brownouts to 156 and overvoltages to 276V
• Fault tolerant auto bypass mode
• Expandable runtime with optional BP240V10RT3U battery packs
• $250,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)

Tripp Lite 10,000VA (10kVA) SmartOnline Rack/Tower UPS. The SmartOnline SU10KRT3UHV on-line, double conversion UPS protects server, networking or telecommunications equipment from blackouts, voltage fluctuations and surges in a compact tower/rackmount housing. In rack configuration, power module and battery pack occupy only 3 rack spaces each (6U total). Upright tower placement of entire system supported with included tower stands. Large capacity 10,000VA/8000W power module converts raw input AC to DC, then back to perfect sine wave AC output within 2% of user-selectable 200/208/220/230/240V AC output voltages. Frequency regulation locks output power to 50/60Hz (+/-0.2 Hz), removing harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types. Perfectly regulated, continuous sine wave output with zero transfer time offers guaranteed compatibility with all equipment types. Hardwire input and output connections support a variety of permanent or PDU style power connections. Battery support can be extended through the addition of optional external battery packs, sold separately (part# BP240V10RT3U). Includes slot for internal SNMP/Web card, plus DB9 enhanced serial monitoring port for unattended shutdown, remote control and monitoring of UPS system and power data.

Features:

• True on-line, double conversion UPS provides pure, sine wave AC output at all times
• World-wide compatibility with Euro 50Hz and High Voltage North American 60Hz power
• Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
• Removes harmonic distortion, electrical impulses, frequency variations and other hard to solve power problems
• 10,000VA / 8,000W power capacity with hardwire input / output connections
• Accepts input voltages between 156 and 276, regulating output within 2% of selectable 200/208/220/230/240V AC output
• Standard included 3U battery pack provides 10 minutes runtime at half load (5,000VA) and 4 minutes at full load (10,000VA)
• Expandable runtime with multiple external battery packs, sold separately (part# BP240V10RT3U)
• Innovative design makes unit adaptable for rackmount, tower, or stacking applications
• Power module and battery pack require only 3 rack spaces each (6U total rack space usage)
• DB9 serial port for network interface; SNMP compatible
• Slot for optional SNMP/Web card (part# SNMPWEBCARD)
• PowerAlert unattended shutdown software and 6 ft. network cable included
• Fault tolerant auto-bypass maintians continuous utility output to connected equipment, even in cases where the UPS is overloaded or suffers an internal failure that requires service
• Diagnostic LEDs and LCD provide complete overview of operating conditions, UPS status and more
• Mounting hardware included
• Includes RJ11 EPO (emergency power off) port and interconnection cable
• 2 year manufacturers product warranty
• $250,000 Ultimate Lifetime connected equipment insurance

Typical Applications:

Ideal for protection of critical 200/208/220/230/240V equipment in server rooms, internetworking closets and telecommunications systems in rackmount or tower applications. Common applications include corporate or departmental servers, workstations, hubs, routers, bridges, CAD/CAM workstations, concentrators, IP telephony and traditional PBX switching systems.

Options & Accessories:

• SNMP accessories: SNMPWEBCARD, ENVIROSENSE
• External battery pack: BP240V10RT3U
• AS400/iSeries Shutdown Cable Kit: AS400 CABLE KIT
• Two Post Rackmount Kit: 2POSTRMKITWM (2 required)
• Extended warranty: 3 Year WEXT3-SU10KHV
• Start-up service plus on-site warranties: 2 Year WOS2-10K, 3-Year WOS3-10K
• Start-up service only: WSTRTUP-6-10K

Package Includes:

• SU10KRT3UHV Rack-Tower UPS System with hardwire distribution module and 1 BP240V10RT3U battery pack
• PowerAlert Software and cabling
• Mounting hardware for 4 post rack enclosures / tower stands
• Instruction manual with warranty information