Surge Protection For Virtually Every Network Interface

Lightning, electrostatic discharges, ground surges and faulty wiring send surges along your network lines, causing glitches, lock-ups and hardware damage on your computer system. Tripp Lite Network Surge Suppressors end the threat of dataline surges. Installed directly at your data ports, they protect your computer's delicate internal circuitry with up to 300% more surge absorbing power than competitive models.

Features include:

  • Premium connectors with gold-plated contacts
  • The best surge-clamping levels available
  • High-speed avalanche diodes divert excess energy away from network components

RJ11

DTEL2 DataShield In-Line Surge Protector for Network and Phone Lines, 2-Line RJ11/RJ45
DTEL2

DataShield In-Line Surge Protector for Network and Phone Lines, 2-Line RJ11/RJ45

Your network/phone line is vulnerable to surges and power problems. These connections provide one more entry-way for transient surges to damage your equipment. Seal off your equipment from potential damage by stopping transient surges with the DataShield DTEL2 Network Surge Suppressor. It protects up to 2 network or phone lines, modems, fax machines and answering machines against damage from lightning, electrostatic discharge and ground surges.

  • Interface Type: RJ11/RJ45
  • Lines Protected: 4,5 & 3,6 pairs
  • Clamping Voltage: 260V
  • Maximum Current: 250 amps

RJ45

DNET1 DataShield In-Line Surge Protector for Network and Phone Lines, 1-Line RJ45
DNET1

DataShield In-Line Surge Protector for Network and Phone Lines, 1-Line RJ45

Protects network datalines on workstations, printers, hubs and other devices from blown NIC cards, garbled transmissions, lock-ups and hardware failures caused by surges, line noise, ESD, faulty wiring and lightning.

  • Network Ethernet line surge suppression for 100Base-T, 10Base-T, Token Ring, AS400/Sys3x and RS422 applications
  • Ideal protection for NICs, terminals, hubs, printers, LAN equipment, and other internetworking devices
  • Protects against the effects of electrostatic discharge, faulty wiring and lightning
  • Reduces blown NIC cards, garbled network transmissions, system lock-ups and hard equipment failure
  • 750A circuit breaker; 7.5V nominal clamping voltage
  • RJ45 input and output connections with included patch cable
DSUT1CSU Datashield In-Line Surge Protector for Network and Digital/Leased Lines, T-1, ISDN, 1-Set RJ11/45/48
DSUT1CSU

Datashield In-Line Surge Protector for Network and Digital/Leased Lines, T-1, ISDN, 1-Set RJ11/45/48

What do you currently have protecting your high-speed RJ45 connection? If the answer is nothing, your equipment is in danger of being damaged by surges and line noise. Even with protection on your power line, you are still vulnerable to these power problems on your network connection. Use the DataShield DSUT1CSU Network Surge Suppressor to protect your network. It�s ideal for sensitive "U" and "S/T" interfaces on modems, NT1 devices, CSU/DSUs, terminal adapters and other pieces of high-speed equipment.

  • Complete T1 and ISDN (RJ11/45/48) surge protection
  • Protects against the effects of electrostatic discharge, faulty wiring and lightning

DB9

DB9 Datashield Serial In-Line Surge Protector
DB9

Datashield Serial In-Line Surge Protector, DB9

Is your DB9 serial connection protected? If not, your equipment is vulnerable to damage and performance problems. Surges and line noise don't just affect the power line; they can enter your equipment on any connection. So protect your DB9 serial equipment with the DataShield DB9 In-Line Surge Suppressor. It's the ideal choice for protecting PCs, printers, modems and anything with a DB9 connection.

  • Interface Type: DB9
  • Lines Protected: 1-9 & Chassis
  • Clamping Voltage: 18V
  • Maximum Current: 340 amps

DB25

DB25-ALL
DB25-ALL

Network In-Line Dataline Surge Protector 120V / 230V 25-PIN DB25

Does your equipment have a DB25 connection? That connection is a potential inlet for damaging surges and line noise to affect your PC, printer or modem. Protect any DB25 serial connection with the DataShield DB25-ALL In-Line Surge Suppressor, and make sure your network is safe from power problems.

  • Interface Type: DB25
  • Lines Protected: 1-25 & Chassis
  • Clamping Voltage: 18V
  • Maximum Current: 340 amps