Testing & Verification

IVT600 Tri-Porter

The first network installation tester that provides a full range of physical wiring tests for the fast, efficient delivery of IP-based voice, data and video services in the home or small office with one integrated tool.

NT955 Validator-NT™

The NT955 has all the testing and certifying capabilities of the Validator NT950, but also includes new Active Network Tests that are designed to identify network devices such as hubs, switches, NICs, and routers on your network and verify connectivity (manual IP or via DHCP) to the internet by pinging up to seven different IP addresses simultaneously. In addition, the kit includes a set of 8 wiremap remotes.

NT950 Validator™

Validator™ (NT950) will certify network cable runs up to Gigabit speeds as per IEEE 802.3, test for physical problems in network, cable, telephone, audio, and security/alarm wiring, find Opens and Shorts with TDR technology, and create reports to outline what the customer has asked for and the results of the installation.

Validator™ LAN Certifier Kit - Includes Validator™, Remote, Cables and Adapters, Plan-Um™ Software, and 2 AC Adapter Power Chargers in a Hard-Sided, Soft Zipper Case

CS300 Satellite Finder

The CS300 Satellite Finder from Test-Um lets you make fine adjustments to your satellite dish anywhere, anytime. Simply hook up the unit to your LNB and receiver, power up the receiver and move your dish so that the meter reads at its highest level.

TP100 Tell-All Indicator

Using the TP100 couldn't be easier. Just plug the supplied jumper cable into any RJ jack that you would like to know about. The TP100's LEDs light up to indicate which wire pairs are terminated indicating you are on a data jack. One light turns on when you are connected to a phone jack. Pretty simple, isn't it?

TP250 Net-Rite™ Ethernet Cable Tester

Net-Rite™ Ethernet Cable Tester Model TP250 is an extremely easy to use ethernet cable tester.

Features include - Auto-on when sensing the remote or a short - Auto-off when the remote is disconnected to conserve battery life - Ergonomic shape, with soft edges - When not in use, the remote stores in the bottom of the main unit.

TP300 Resi-Tester™

Resi-Tester™ (TP300) is the first identifier and verification tester designed exclusively for all the wiring environments found in Home Networking and Home Automation. CATV, telephone systems, audio cable, security/alarm wiring, and network cabling can all be tested and located using the Resi-Tester™ and optional room identifier sets. Multiple input ports and included adapter cables mean any wire can be attached and tested!

TP309 Resi-Tester™ #1 Terminator

Replacement #1 Terminator for the TP300 Resi-Tester™

TP310 Resi-Tester™ Coax Remote Identifiers

Pack of ten Push-On male "F" connector remotes for the TP300 Resi-Tester™

TP311 Set of 20 (1-20) Coax Remote Identifiers For Resi-Tester™

Pack of twenty Push-On male "F" connector remotes numbered 1-20 for the TP300 Resi-Tester™

TP312 Set of 20 (1-20) RJ45 Wiremappers For the Resi-Tester™

Pack of twenty RJ45 remotes numbered 1-20 for the TP300 Resi-Tester™

TP314 Set of 20 (1-20) RJ45 Wiremappers For the Resi-Tester™

Pack of twenty RJ11 remotes numbered 1-20 for the TP300 Resi-Tester™

TP315 Set of 20 (1-20) Speaker Remotes

Set of 20 wiremapping remotes used with the Speaker Seeker™, Resi-Tester™, or Testifer™. Alligator clip ends attach to unterminated wire or cable. Can be used on unterminated coax, speaker, and security/alarm cables.

TP350 Testifier™ All Cable Tester

The new Testifier™ produces the most accurate and easy-to-understand results of any cable tester/verifier on the market. Its large LCD display is easy to read--it shows a clear picture of a wired cable; data, coax, telephone, security/alarm, or unterminated site wire.

TP400 Speaker Seeker™

The Speaker Seeker™ (TP400) wiremaps speaker and security/alarm wire up to 20 individual runs at a time by using 20 wiremap remotes. Each remote is specially wired with alligator clips to attach to unterminated paired cable ends.

TP500 LanRoamer™ tester/analyzer

The TP500 LanRoamer™ tester/analyzer has been developed by Test-Um Inc. as a result of microprocessor technology that allows it to meet the needs of both maintenance and installation technicians.

TP505 LanRoamer™ Replacement Remote

Lighted Replacement Remote for the TP500 LanRoamer™

TP600 LanRoamerPRO™

Test-Um Inc. has once again revolutionized the network test equipment market with the new TP600 LanRoamerPRO™. This new test set will completely fulfill just about any need in LAN cable testing, including length measurement, at a price that is half what a similar unit usually costs.

TP607 LanRoamerPRO™ Kit with 8 Remotes

Test-Um Inc. has once again revolutionized the network test equipment market with the new TP600 LanRoamerPRO™. This new test set will completely fulfill just about any need in LAN cable testing, including length measurement, at a price that is half what a similar unit usually costs.

TP650 TestifierPRO™ Cable Tester

TestifierPRO™ cable tester is an easy-to-use, versatile handheld unit for testing low-voltage cabling systems supporting voice, data, Internet, and video applications. One-button operation initiates Telco, Coax, and Network mode for diagnostic tests and results. The main unit includes built-in RJ1 1 and RJ45 interfaces for testing 6-wire and 8-wire twisted pair and built-in F-connector for testing coax. A remote bay houses a detachable test remote with built-in jacks for testing twisted-pair Telco and Network cable.

NT700 LanScaper™ Network Management Tool

The new LanScaper™ Network Tester is the first in a new line of Physical Layer Network Management Devices. The LanScaper™ combines the functions of a high-end cable tester and length measurement device with the capability to monitor and correct network problems connected with the physical layer and link conditions of the network.

NT750 LanScaper™ Network Testing Kit

The new LanScaper™ Network Tester is the first in a new line of Physical Layer Network Management Devices. The LanScaper™ combines the functions of a high-end cable tester and length measurement device with the capability to monitor and correct network problems connected with the physical layer and link conditions of the network.

NT800 and NT850 LanScaperPRO™ Network Tester

Perform network testing functions including port discovery, PoE test, ping, hub flash, CDP and high-end cable testing including length measurement. Monitor and correct network problems associated with the physical layer and link conditions of the network.

WP150 Wi-Net Window

Test-Um's first entry into the new world of wireless and it's a beauty!! The Wi-Net Window tool will help installers and owners of wireless networks identify, clarify, and configure all the wireless transmission equipment on a site. It will help prevent conflicts of internet access over wireless points and give a clear picture of the range and availability of each wireless access point. No other product in this class offers more information so clearly and easily displayed.