Sept 2, 2008 New Store Hours
8 AM to 6 PM Eastern Time
Monday through Friday
Package Contents
Resi-Talker butt-in telephone test set Manual (PDF, 0.63 MB)
| Part # | Description | Lashen's Price |
3 or More |
|---|---|---|---|
| LB300 | Resi-Talker telephone test set with basic alligator clip cord set | $ 78.13 | $ 76.54 |
Resi-Toner™ is a full function tone generator with unique features designed to further test connections on telephone systems and speaker installations. Find your outlets and assure your connections with the Resi-Toner™
"Powers-up" the installed telephone lines under actual load conditions with a simulated dial tone to check connectivity and proper wiring configurations without a service connection.
Full-feature tone generator with 3 different tone sounds and continuity test.
Generates a unique tone sequence for testing speaker installations by "popping" speakers---will work with either AC or DC coupled speaker types.
Requires 9V battery (not included)
TG400 Resi-Toner Tone Generator with Coil Mode Manual (PDF, 0.53 MB)
| Part # | Description | Lashen's Price |
3 or More |
|---|---|---|---|
| TG400 | Resi-Toner tone generator with alligator clips in a nylon pouch | $ 59.95 | Super Special |
Resi-Tester™ (TP300) is the first identifier and verification tester designed exclusively for all the wiring environments found in Home Networking and Home Automation. CATV, telephone systems, audio cable, security/alarm wiring, and network cabling can all be tested and located using the Resi-Tester™ and optional room identifier sets. Multiple input ports and included adapter cables mean any wire can be attached and tested!
Resi-Tester™ displays cabling results using a large easy to read LCD with clear concise information showing all the faults connected with the various cable types. It warns of voltage on lines and shows a Pass or Fail message after each test.
The built-in tone generator sends a signal down installed wires, so that they can be traced in the walls and their exact terminus identified. The built-in remote will identify individual outlets whether they are phone, cable or data network. Using the optional multi-identifier sets, the user can verify connections on up to 10 coax outlets and 8 paired cables simultaneously for wire-mapping the largest jobs easily and efficiently.
TP300 Cable Tester manual (PDF, 0.72 MB)
TP608: Set of 7 Remotes
TP311: Set of 20 (1-20) Coax Remote Identifiers For Resi-Tester™
TP312: Set of 20 (1-20) RJ45 Wiremappers
TP40: 12in. Cable Assembly, RJ45/alligator clips
TP310: Set of 10 Resi-Tester™ Coax Remote Identifiers
TP314: Set of 20 (1-20) RJ11 Wiremappers
TP315: Set of 20 (1-20) Speaker Remotes
| Part # | Description | Lashen's Price |
3 or More |
|---|
Resi-Tester #1 Terminator
| Part # | Description | Lashen's Price |
3 or More |
|---|---|---|---|
| TP309 | #1 network remote identifier - replacement for Resi-Tester and Testifier | $ 14.90 | $ 13.55 |
Set of 10
| Part # | Description | Lashen's Price |
3 or More |
|---|---|---|---|
| TP310 | Set of 10 (1–10) coax ID-only remotes for cable testers except Net-Rite, LanRoamer, LanRoamerPRO, and LanScaper | $ 23.41 | $ 22.93 |
Set of 20 (1-20) coax remote identifiers for Resi-Tester™
| Part # | Description | Lashen's Price |
3 or More |
|---|---|---|---|
| TP311 | Set of 20 (1–20) coax ID-only remotes for cable testers except Net-Rite, LanRoamer, LanRoamerPRO, and LanScaper | $ 43.86 | $ 42.96 |
Set of 20 (1-20) RJ45 wiremappers for Resi-Tester™
| Part # | Description | Lashen's Price |
3 or More |
|---|---|---|---|
| TP312 | Set of 20 (1-20) RJ45 remote identifiers for or cable testers except Net-Rite, LanRoamer, LanRoamerPRO, and LanScaper | $ 26.30 | $ 25.76 |
Set of 20 (1-20) RJ11 wiremappers for Resi-Tester™
| Part # | Description | Lashen's Price |
3 or More |
|---|---|---|---|
| TP314 | Set of 20 (1-20) RJ11 remote identifiers for or cable testers except Net-Rite, LanRoamer, LanRoamerPRO, and LanScaper | $ 26.30 | $ 25.76 |
Set of 20 wiremapping remotes used with the Speaker Seeker™, Resi-Tester™, or Testifer™. Alligator clip ends attach to unterminated wire or cable. Can be used on unterminated coax, speaker, and security/alarm cables.
| Part # | Description | Lashen's Price |
3 or More |
|---|---|---|---|
| TP315 | Set of 20 (1-20) two lead remote identifiers for or cable testers except Net-Rite, LanRoamer, LanRoamerPRO, and LanScaper | $ 55.70 | $ 54.56 |
Use the wiremapper sets to find the end location of any type of cable run - network, telephone, audio, or coaxial. Up to 20 locations at a time, using the Resi-Tester™
Package Contents
| Part # | Description | Lashen's Price |
3 or More |
|---|---|---|---|
| KP420 | Master Wiremapping Kit Set of 20 (1-20) coax remote identifiers, set of 20 (1-20) RJ45 wiremappers, set of 20 (1-20) RJ11 wiremappers, Set of 20 (1-20) speaker remotes in a nylon pouch | $ 151.78 | $ 148.68 |
Replacement #1 Coax Remote Identifier for Resi-Tester™
| Part # | Description | Lashen's Price |
3 or More |
|---|---|---|---|
| TP65 | Replacement #1 coax remote identifier for cable testers except Net-Rite, LanRoamer, LanRoamerPRO, and LanScaper | $ 2.43 | $ 2.21 |
Resi-Tracer combines unique new features for tracing telephone, network, coax, and audio cable with special functions for finding and phasing speakers and testing telephone systems.
Resi-Tracer Probe Manual (PDF, 0.99 MB)
| Part # | Description | Lashen's Price |
3 or More |
|---|---|---|---|
| TT300 | Resi-Tracer probe | $ 71.00 | $ 69.55 |
KP312: Deluxe Resi-Kit TP300, TG400, LB300, TT300, TP311, TP312, TP314 in a nylon, zippered tool case
KP309: Resi-Tone and Trace Kit: TG400, TT300 in a blister pack