Set Of 4 Terminators for Coax Mapping Tester

The CX30 Coax Terminator set  contains one each of the following coaxial terminators for the CX200 Coax Mapper.

• CX31 - #1 Brown Terminator
• CX32 - #2 Red Terminator
• CX33 - #3 Orange Terminator
• CX34 - #4 Yellow Terminator

Terminator - Brown #1

Replacement terminator for CX200 Coax Mapper

Terminator - Red #2

Replacement terminator for CX200 Coax Mapper

Terminator - Orange #3

Replacement terminator for CX200 Coax Mapper

Terminator - Yellow #4

Replacement terminator for CX200 Coax Mapper

Cable Set - Alligator Clip blister pack

48" cord set, RJ11 to alligator clip set with strain relief and a cloth liner covering approximately 12" of the cable on the strain relief end.

Cable Set - Piercing Clip blister pack

48" cord set, RJ11 to piercing clip set with strain relief.

'No Twist' telephone cord adapter

Keeps telephone handset cords from twisting and kinking

Deluxe Cord Set, piercing clips

48" Cord set, premium, RJ11 to piercing clip set.

Cable Set - Bed of nails blister pack

48" Cord set, RJ11 to bed of nails with strain relief.

48" Cord Set - RJ11 to Alligator Clip Set

48" cord set, RJ11 to alligator clip set without a strain relief and no cloth covering.

Push-on F coax connector with alligator clips, 18in.

Push-on F coax connector with RJ11 connector, 18in.

Deluxe Cord Set, bed of nails

Woven cable insulation for high durability and professional bed of nails cord set per Bell specifications

Mini Headset - Headset/Microphone

The Test-Um Mini Headset - Over the ear design works with hats and glasses; Microphone boom adjustable for both left and right side; 4ft cord with 2.5 mm cell phone style plug; for use with Test-Um telecom products.

Deluxe Headset

The Test-Um Deluxe Headset - Full-sized headset with adjustable head band; Use on left or right side; 2.5 mm cell phone style plug with 4-ft cord.

Deluxe Swivel Belt Clip

The Test-Um deluxe swivel belt clip - also for phones, pagers and walkmans; push to snap on ... push to slide off.

4-position modtest adapter

Gain circuit access without disconnecting equipment. Angled sturdy copper contacts prevent clips from disconnecting during testing.

6-position modtest adapter

Gain circuit access without disconnecting equipment. Angled sturdy copper contacts prevent clips from disconnecting during testing.

8-position modtest adapter

Gain circuit access without disconnecting equipment. Angled sturdy copper contacts prevent clips from disconnecting during testing.

AT&T hook / clip assembly

Telco Clip

This is the easy way to clip any Test-Um Lil' Buttie test set to a belt.

Cordura Pouch for Lil' Buttie

Rugged black case includes two pockets. One secures the test set, and the other holds accessories like test clips, line cords and head sets.

Lil' Buttie / Ranger Protective Boot

The LB81 offers additional comfort grip and increased drop test performance.

AT&T hook/clip assembly

This is the easy way to clip the Test-Um Ranger™ (LB255) test set to a belt.

AC adapter/charger unit

Battery for Validator™

Validator™ Main Unit Carrying Case

The new NT935 pouch is designed to carry the main Validator unit in a safe and accessible way. For daylong large jobs and ease of transportation at the job, the NT935 "Papoose Pouch" is a great accessory for the Validator Speed Certifier.

It can be hung by its carrying strap across the shoulders or from the neck to use it with both hands in front of the body. Using the front position the unit can be "propped" against the body and this allows the hands to be free to connect, disconnect cables or any other task.

Use the clever built in stand design that allows the Validator to sit upright on a desk or any flat surface. Allows for easy access to enter or obtain data without having to hold the unit.

72" Cable assembly, USB

Cable Labels, Roll of 100

Pouch for Tone Tracer

Pouch for Talk & Trace™

Tough Cordura Pouch for the TM110 Talk & Trace™

Cordura Pouch for one LanScaper, LanRoamerPRO, LanRoamer or Resi-Tester

Holds one of the following:

• TP300 - Resi-Tester
• NT700 - LanScaper or
• TP600 - LanRoamerPRO

Pouch for Tone Tracer and Tone Generator

Pouch for Lil' Buttie, Tone Tracer and Tone Generator

Tough Cordura Pouch for Lil' Buttie, Tone Tracer and Tone Generator Kits

Cord Sets - Alligator Clips

Used to replace standard alligator cord set used on TG100 tone generator

Cord Sets - Bed of Nails Clips

24" Cord set, RJ11 to bed of nails cord set for tone generator

Deluxe 21 Pocket Sewn Tool Case

Used in the Deluxe Total Pro Test Kits. KP600, KP601, KP602-A, KP603-A, and KP605-A

NOTE: Case comes empty, products shown are note included.

Compact 8 Pocket Tool Case

Used in the Compact Total Test Kits. KP450, KP500, KP501, KP505-A, and KP506-A

NOTE: Case comes empty, products shown are note included.

24in. Test Lead Assembly, banana plug/test probes

24" Cable assembly, banana plug to test probes

48in. Test Lead Assembly, banana plug/test probes

48" Cable assembly, banana plug to test probes

Replacement jumper cable for Tell-All indicator or TP100

7.5" Cable assembly, RJ45 to modular plug for RJ11 or RJ45

7.5in. Cable Assembly

with two no-fault RJ12 connectors for RJ11 or RJ45 jacks

No-fault connectors assure no damage to RJ45 jacks. For use with TP500/TP600 and TP607

No-fault RJ12 connector

• Used on both RJ11 and RJ45 jacks
• 6 conductor
• Uses standard telco crimper

12in. Cable Assembly, RJ45 / alligator clips

Used with LanRover™ products, TP500, TP600, TP607

RJ45 to Coax Adapter Kit

12in. Cable Assembly, shielded, RJ45 connectors

Used with LanRover™ products, TP500, TP600, TP607

12in. Cable Assembly, unshielded, RJ45 connectors

Used with LanRover™ products, TP500, TP600, TP607

Adapter RJ45 plug / RJ11 jack - 2 pieces

The TP60 is used to check telephone outlets. For use with:

• NT700: LanScaper Tester
• NT750: LanScaper Testing Kit
• TP600: LanRoamerPRO
• TP607: LanRoamerPRO Testing Kit

Adapter - F to BNC

Plugs into cable tester to check BNC CATV connections

Adapter, F jack to BNC jack

Adapter, F jack to BNC jack

Replacement #1 Coax Remote Identifier for Resi-Tester™

Replacement #1 Coax Remote Identifier for Resi-Tester™

24" Cable Assembly, RJ45 with 8 alligator clips

24" Cable assembly, RJ45 with 8 alligator clips

Adapter, RJ45 plug to BNC jack

Adapter, RJ45 plug to BNC jack

Adapter, BNC plug to F jack

Adapter, BNC plug to F jack

Sacrificial Cable for extending modular plug use

Test-Um recommends using the TP74 Sacrificial Cable Modules. This will extend the life of your RJ45 jacks in both the Validator and Remote units. This is a great way to eliminate the cost of sending your Validator in for repair.

Resi-Tester™ #1 Terminator

Resi-Tester #1 Terminator

Resi-Tester™ Coax Remote Identifiers

Set of 10

Set of 20 (1-20) Coax Remote Identifiers For Resi-Tester™

Set of 20 (1-20) coax remote identifiers for Resi-Tester™

Set of 20 (1-20) RJ45 Wiremappers For Resi-Tester™

Set of 20 (1-20) RJ45 wiremappers for Resi-Tester™

Set of 20 (1-20) RJ11 Wiremappers For Resi-Tester™

Set of 20 (1-20) RJ11 wiremappers for Resi-Tester™

Set of 20 (1-20) Speaker Remotes

Set of 20 wiremapping remotes used with the Speaker Seeker™, Resi-Tester™, or Testifer™. Alligator clip ends attach to unterminated wire or cable. Can be used on unterminated coax, speaker, and security/alarm cables.

LanRoamer™ Replacement Remote

Lighted Replacement Remote for the TP500 LanRoamer™

LanRoamerPRO™

Set of 7 Remotes for LanRoamerPRO™

#1 Replacement Remote Identifier for LanScaper™ and LanRoamerPRO™

Replacement remote identifier #1 for

• NT700: LanScaper™ Tester
• NT750: LanScaper™ Testing Kit
• TP500: LanRoamer™
• TP600: LanRoamerPRO™
• TP607: LanRoamerPRO™ Testing Kit

Set of 8 network remote identifiers (#1-#8)

For all applicable network testers

Round Tip

Round replacement tip for TT100 Tone Tracer.

Paddle Style Tip

Replacement Paddle Style Tip for TT100 Tone Tracer.