XL fiberTOOLS Series Professional Fiber Optic Instruments by Tempo and available from Lashen Electronics

170XL

Fiber Optic Visual Fault Finder

Find Trouble in Fiber Cabling or Connectors

Easy Fault Locating

The 170XL visual fault locator is an indispensable tool for quickly identifying bending losses and breaks in optical fibers. If a fiber is bent too tightly, red laser light will be seen escaping through the cable jacket. Likewise if a fiber is broken, escaping light will be visible where the break is located.

Identifying Bad Connectors

Connectors are easily tested using the 170XL visual fault locator. A fiber broken inside or past the ferrule will cause it to glow. If the whole connector glows, it is a defective connector. If the end face polish of the connector is bad, light will be reflected internally.

Features

Continuous wave output mode for steady fault location
Find breaks to 3km
Blinking output mode increases viewing contrast
Easy-to-use quick interface fits all 2.5mm connector interfaces (FC, SC, ST)
1.0mW output power
Ergonomic rotary switch permits easy one-handed operation
Rugged, compact and splash proof aluminum design
Two AA batteries provide 48 hours continuous operation
Nylon belt holster included

Part #	GreenLee PN	Description	Lashen's Price	Wt. (lbs.)
170XL	52022371	LOCATOR, FAULT-VISUAL (170XL)	$ 419.89	0.634

Optical
Light source type	635nm red laser diode
Center wavelength Nominal Range (typical)	635nm 630nm to 640nm
Spectral width (FWHM)	<2nm
Typical output power Max. into SMF-28 fiber Min. CW output mode	1.0mW (0dBm) 316uW (-5 dBm)
Blink frequency in MOD mode Power Requirements Battery life Connector interface	<3Khz (approximate) Two AA size 1.5V batteries Approx. 48 hours continuous operation Standard "Quick Connect" universal 2.5 mm receptacle
Environmental
Operating temperature Storage temperature Humidity	-10° C to +50° CC -40° C to +60° C 0 to 95% non-condensing
Dimensions	Length: 22 cm (9.0 in.); Diameter: 2.54 cm (1 in.)
Weight	200g (7 oz.)
CDRH laser class	Class IIIa
CE	IEC 60-1-2 portion of the EN50082-1 ESD immunity requirement EN50082-1: 1992 IEC 801-2,-3,-4

560XL

Fiber Optic Power Meter

Measure Insertion Loss and Optical Power

Do not confuse the small size of the 560XL with its ability to provide powerful results. The optical power meter is the perfect tool for installation and testing of fiber optic cabling. The 560XL can be used to measure optical power or used in conjunction with a LED or Laser source to perform insertion loss testing on multimode and singlemode fiber optic cabling.

The 560XL measures optical power at 850nm, 1300nm, 1310nm and 1550nm. It can store reference levels for faster, more efficient testing. The 560XL uses Snap On Connector interface (SOC) to connect FC, SC and ST connectors.

Features

Easy to use - three buttons control all functions
Loss measurements in (dB) power measurements in (dBm)
0.01dB measurement resolution
Multi-wavelength storage - stores and recalls reference power levels for faster, more efficient measurements
Snap on connector interface adapts to FC, SC and ST connectors
Long battery life - approx. 100 hours continuous operation
User selectable auto shut-off
Rugged and splash-proof
Economically priced

Part #	GreenLee PN	Description	Lashen's Price	Wt. (lbs.)
560XL	52022353	METER, FIBRE OPTIC POWER	$ 525.39	0.892

Optical
Calibration Wavelengths	850nm, 1300nm, 1310nm and 1550nm
Power Range	-3 dBm to -60 dBm
Accuracy	± 0.25dB
Linearity +3dBm to -3dBm -3dBm to -50dBm -50dBm to -60dBm	±0.5dB ±0.05dB ±0.5dB
Resolution	0.01dB
Power Requirements	Two AA size 1.5V batteries (approx. 100 hours continuous operation)
Connector interface	FC, SC or ST
Environmental
Operating temperature Storage temperature Humidity	-15° C to +55° C -35° C to +70° C 0 to 95% non-condensing
Dimensions	7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
Weight	241g (8.5 oz.)
CE	EN61010; EN50081-1: 1992; EN55011, Group 1, Class A EN50082-1: 1992 IEC 801-2, -3, -4

570XL

850/1300nm LED Source

Multimode LED Source for Insertion Loss

The 570XL is the perfect light source for performing insertion loss testing on multimode fiber optic cabling. Dual wavelength output (850nm and 1300nm) enables fast and accurate insertion loss measurements. Once the user has set the reference with an optical power meter, the 570XL LED source provides a stable output for hours of continuous measurements. The 570XL LED source is configured for FC, SC and ST fiber optic connectors.

Features

850/1300nm wavelengths
Stable calibrated output
Easy-to-use
Continuous wave and modulated output
Fixed connector interface FC, SC or ST
Long battery life - approx. 80 hours continuous operation
User selectable auto shut-off
Rugged and splash-proof
Economically priced

Part #	GreenLee PN	Description	Lashen's Price	Wt. (lbs.)
570XL-FC	52022355	LED SOURCE (850/1300nm) (570XL-F	$ 802.52	0.15
570XL-SC	52022356	LED SOURCE (850/1300nm) (570XL-S	$ 802.52	0.782
570XL-ST	52022357	LED SOURCE (850/1300nm) (570XL-S	$ 802.52	0.6

Optical
Center Wavelengths	850nm	1300nm
Range (typical)	840nm to 880nm	1270nm to 1345nm
Max. spectral width	55nm	150nm
Stability (1 hour)	±0.05dB	±0.05dB
Typical power output 100/140um 62.5/125um 50/125um	-13dBm -13dBm -14dBm	-20dBm -20dBm -21dBm
Modulation frequency	270 kHz, 1 kHz and 2 kHz	270 kHz, 1 kHz and 2 kHz
Power Requirements	Two AA size 1.5V batteries (approx. 80 hours continuous operation)	Two AA size 1.5V batteries (approx. 80 hours continuous operation)
Connector interface	FC, SC or ST	FC, SC or ST
Environmental
Operating temperature Storage temperature Humidity	-15° C to +55° C -35° C to +70° C 0 to 95% non-condensing
Dimensions	7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
Weight	241g (8.5 oz.)
CE	EN61010; EN50081-1: 1992; EN55011, Group 1, Class A EN50082-1: 1992 IEC 801-2, -3, -4

580XL

1310/1550nm Laser Source

Singlemode Laser Source for Insertion Loss Testing

The 580XL is the perfect light source for performing insertion loss testing on single mode fiber optic cabling. Dual wavelength output (1310nm and 1550nm) enables fast and accurate insertion loss measurements. Once the user has set the reference with an optical power meter, the 580XL Laser source provides a stable output for hours of continuous measurements. The 580XL laser source is configured for FC, SC and ST fiber optic connectors.

Features

1310/1550nm wavelengths
Stable calibrated output
Easy-to-use
Continuous wave and modulated output
Fixed connector interface FC, SC or ST
Long battery life - approx. 80 hours continuous operation
User selectable auto shut-off
Rugged and splash-proof
Economically priced

Part #	GreenLee PN	Description	Lashen's Price	Wt. (lbs.)
580XL-FC	52022358	LASER SOURCE (1310/1550nm) (580X	$ 1,051.83	0.65
580XL-SC	52022359	LASER SOURCE (1310/1550nm) (580X	$ 1,051.83	0.81
580XL-ST	52022360	LASER SOURCE (1310/1550nm) (580X	$ 1,051.83	0.83

Optical
Center Wavelengths	1310nm	1550nm
Range (typical)	1280nm to 1340nm	1520nm to 1580nm
Max. spectral width	<5nm	<5nm
Stability (1 hour)	±0.05dB	±0.05dB
Typical power output (9/125) Minimum Typical	-8dBm -7dBm	-8dBm -7dBm
Modulation frequency	270 kHz, 1 kHz and 2 kHz	270 kHz, 1 kHz and 2 kHz
Power Requirements	Two AA size 1.5V batteries (approx. 80 hours continuous operation)	Two AA size 1.5V batteries (approx. 80 hours continuous operation)
Connector interface	FC, SC or ST	FC, SC or ST
Environmental
Operating temperature Storage temperature Humidity	-15° C to +55° C -35° C to +70° C 0 to 95% non-condensing
Dimensions	7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
Weight	241g (8.5 oz.)
CE	EN61010; EN50081-1: 1992; EN55011, Group 1, Class A EN50082-1: 1992 IEC 801-2, -3, -4
CDRH laser class	Class 1

5670XL

Multimode Fiber Optic Test Set

Features

Insertion loss test set for multimode fiber
850/1300nm loss measurements
Connector for FC, SC or ST
Rugged package design
Easy-to-use portable package
Economically priced

5670-FC Includes:

560XL Optical Power Meter
570XL-FC 850/1300nm LED Source w/FC Connector
T1020 FC/PC SOC Adapter
914B Carrying Case

5670-SC Includes:

560XL Optical Power Meter
570XL-SC 850/1300nm LED Source w/SC Connector
1062 SC/PC SOC Adapter
914B Carrying Case

5670-ST Includes:

560XL Optical Power Meter
570XL-ST 850/1300nm LED Source w/ST Connector
T1030 ST/PC SOC Adapter
914B Carrying Case

Part #	GreenLee PN	Description	Lashen's Price	Wt. (lbs.)
5670-FC	52022361	TEST SET,MULTIMODE (850/1300nm)(	$ 1,259.68	2.203
5670-SC	52022362	TEST SET,MULTIMODE (850/1300nm)(	$ 1,259.68	2.174
5670-ST	52022363	TEST SET,MULTIMODE (850/1300nm)(	$ 1,259.68	2.2

5680XL

Singlemode Fiber Optic Test Set

Features

Insertion loss test set for singlemode fiber
1310/1550nm loss measurements
Connector for FC, SC or ST
Rugged package design
Easy-to-use portable package
Economically priced

5680-FC Includes:

560XL Optical Power Meter
580XL-FC 1310/1550nm Laser Source w/FC Connector
T1020 FC/PC SOC Adapter
914B Carrying Case

5680-SC Includes:

560XL Optical Power Meter
580XL-SC 1310/1550nm Laser Source w/SC Connector
1062 SC/PC SOC Adapter
914B Carrying Case

5680-ST Includes:

560XL Optical Power Meter
580XL-ST 1310/1550nm Laser Source w/ST Connector
T1030 ST/PC SOC Adapter
914B Carrying Case

Part #	GreenLee PN	Description	Lashen's Price	Wt. (lbs.)
5680-FC	52022365	TEST SET,SNGLMOD (1310/1550nm)(5	$ 1,574.61	2.3
5680-SC	52022366	TEST SET,SNGLMOD (1310/1550nm)(5	$ 1,574.61	0.123
5680-ST	52022367	TEST SET,SNGLMOD (1310/1550nm)(5	$ 1,574.61	1.963

5890XL

Multimode and Singlemode Fiber Optic Test Set

Features

Insertion loss test set for multimode and singlemode fiber
850/1300nm Loss measurements
1310/1550nm Loss measurements
Connector for FC, SC or ST
Rugged package design
Easy-to-use portable package
Economically priced

5890-FC Includes:

560XL Optical Power Meter
570XL-FC 850/1300nm LED Source w/FC connector
580XL-FC 1310/1550nm Laser Source w/FC Connector
T1020 FC/PC SOC Adapter
915B Carrying Case

5890-SC Includes:

560XL Optical Power Meter
570XL-SC 850/1300nm LED Source w/SC connector
580XL-SC 1310/1550nm Laser Source w/SC Connector
1062 SC/PC SOC Adapter
915B Carrying Case

5890-ST Includes:

560XL Optical Power Meter
570XL-ST 850/1300nm LED Source w/ST connector
580XL-ST 1310/1550nm Laser Source w/ST Connector
T1030 ST/PC SOC Adapter
915B Carrying Case

Part #	GreenLee PN	Description	Lashen's Price	Wt. (lbs.)
5890-FC	52022368	TEST SET,MULTI/SINNLGEMODE (5890	$ 2,094.75	3.918
5890-SC	52022369	TEST SET,MULTI/SINNLGEMODE (5890	$ 2,094.75	2.77
5890-ST	52022370	TEST SET,MULTI/SINNLGEMODE (5890	$ 2,094.75	2.977

Products

Vendors

Audio/Video Products

Security Products

Tools & Test Equipment

Power Products

Racks & Mounts

Satellite & Antennas

More Vendors

Featured Products

XL fiberTOOLS™ Series

Professional Fiber Optic Instruments

170XL

Fiber Optic Visual Fault Finder

Find Trouble in Fiber Cabling or Connectors

Features

560XL

Fiber Optic Power Meter

Measure Insertion Loss and Optical Power

Features

570XL

850/1300nm LED Source

Multimode LED Source for Insertion Loss

Features

580XL

1310/1550nm Laser Source

Singlemode Laser Source for Insertion Loss Testing

Features

5670XL

Multimode Fiber Optic Test Set

Features

5670-FC Includes:

5670-SC Includes:

5670-ST Includes:

5680XL

Singlemode Fiber Optic Test Set

Features

5680-FC Includes:

5680-SC Includes:

5680-ST Includes:

5890XL

Multimode and Singlemode Fiber Optic Test Set

Features

5890-FC Includes:

5890-SC Includes:

5890-ST Includes: