- Tempo
- Tone & Probe
- Cable & Fault Locators
- CATV and Alarm Testing
- Irrigation System Testing
- Telecom Test Equipment
- Fiber Optic Instruments
- Fiber Optic Tools
- Installation Tools & Products
- Accessories
- Manuals
Progressive Electronics / Tempo / Greenlee
Cable and Fault Locators
Model 501 Tracker II offers professional performance in wire locating. With its inductive signal application, the Tracker II can be used on active or dead systems. Now you can trace the path and determine the depth of wires and metallic pipes without having to deactivate the systems.
For those technicians who occasionally need to locate buried or in-wall wiring but don't require all the "bells and whistles" of high priced locators, the 508S is for you. Its compact design doesn't take up valuable truck space while easy to understand operations keep you from constantly referring to instructions.
Model PE2003 Pulser fills in the hole of your buried cable troubleshooting tool set. The Model PE2003 Pulser lets you identify the exact location of even the smallest breaks in the insulation of buried cables. The portable transmitter "pulses" a high voltage signal that radiates into the earth at the location of the faults. With the A-Frame mounted receiver, a visual analog meter points the way to the source of the voltage.
LED and LCD signal strength indicators make it quick and easy to find exact line location. Lightweight and ergonomically balanced. Automatic signal boost makes it easy to trace lines, even those with very weak signals. Receiver may be used in active or passive mode. Receiver locates multiple passive frequencies with a single setting. Receiver automatically locks out passive range when it detects a transmitter signal, reducing the chance of tracing other lines carrying weaker signals.
The CTS 132J comprises a High Power Tone Generator (600J), an Amplifier (109K), a headset, a capacitive probe (that responds to electrostatic fields - ideal for tracing wire pairs), an inductive search coil (that responds to Magnetic Fields - ideal for cable tracing or identification), and associated connecting cables all supplied in a weatherproof pouch.
Irrigation System Testing
Tempo continues its excellence in irrigation system troubleshooting with the introduction of the new Model 24B Station Master Pro. The Station Master Pro is a portable, battery operated irrigation system diagnostic tester combining solenoid activation and wire identification.
The new and improved 521A Wire and Valve Locator builds on the success of the industry-standard Model 521. The new 521A has added features such as: loudspeaker listening, an extended locating wand for comfort, a slimmer case and a switch to easy to find "D" cell transmitter batteries. Like its predecessor, the 521A combines adjustable transmitter power with a sensitive locating receiver to allow location of buried wires and valves with speed and confidence.
The Tempo 24BK Irrigation Tester Kit comes with the 24B Station Master Pro, The 200EP Inductive Probe, and the 700C case.
Toners and Probes
Tone and Probe Kits
The Greenlee 601K-G Basic Tone and Probe Kit is a reliable, economic and easy to use solution for the internal wiring technician. The Greenlee 601K-G Tone and Probe Kit comes complete in a soft zipper case.
When it comes to wire identification, there's no better tool to have than the Model 701K-G. This popular kit is used by technicians in every premise wiring industry including telecom, datacom, electrical, security, HVAC, audio-visual and more. The 701K-G is used to identify single conductors or cables within a bundle, at a cross-connect point, or at remote ends.
When it comes to wire identification kits, the 801K Premium Tone and Probe Kit is top of the line! Containing the 77HP/6A High Power Tone Generator with bent nose piercing clips, increased talk battery supply and higher voltage protection, as well as the 200FP Filter Probe to filter out all that AC hum, the 801K offers all the features professionals are looking for. Both units are housed in the 700C high quality Cordura case and are designed for years of dependable use.
To provide a single solution for the professional, Tempo has developed the 711K - Professional Tone and Probe Kit combining the 77GX Tone Generator and 200GX Inductive Amplifier in a rugged carrying case.
The Xpert Tone and Probe Kit includes the 77GX2 Tone Generator and 200XP Multi-Filter Tone Probe Amplifier in a rugged, woven nylon carrying case. Especially suited for tracing in noisy environments.
AdapToner Modular Breakout Tone Generators
Designed for network installation and maintenance. The new AT8L LAN Toner has the unique feature of sending tone in addition to blinking hub, switch port, and PC activity lights for fast identification.
To provide a single wire identification solution for the network professional, Progressive has developed the AT8LK - LAN Toner Kit combining the AT8L LAN Toner and the 200GX Inductive Amplifier in a rugged carrying case. This kit can be used on any wiring system including Datacomm, Telecom, Security/Alarm, Audio and CATV.
The 802K Digital LAN Tracing Kit is a powerful, unique troubleshooting and tracing solution for LANs and other types of VDV wiring. The industry standard 200FP filter probe (60Hz) is designed to eliminate hum from fluorescent lights and AC power wiring that can obscure tracing tones.
Tone Generators
High output tracer with modular plug and alligator clips
High output tracer with modular plug and 6A bent nose bed-of-nails clips.
Progressive GX Series tone generators are intended to provide tone for tracing and troubleshooting communications circuits. Three distinct, selectable tone signal outputs for multiple line identification and two selectable tone power outputs for use on open and shorted pairs.
Progressive GX Series tone generators are intended to provide tone for tracing and troubleshooting communications circuits. Three distinct, selectable tone signal outputs for multiple line identification and two selectable tone power outputs for use on open and shorted pairs. The 77GX2 offers premium telco-style bent nose 6A clips with piercing pin and bed-of-nails connectors.
The 77M-G permits technicians to identify the conductor within a bundle, at a cross-connect point or at the remote end. This tone generator can be used on twisted pair wiring (telecom, datacom, etc.), single conductors, coaxial cables, de-energized AC wiring and most other wiring.
Inductive Amplifier Probes
Greenlee's 200EP-G Probe is durable but light weight, and has a slim, comfortable design for use in limited space areas with innovative features such as a LED flashlight, 3.5mm headset jack & a large speaker for noisy environments incorporated into the probe. Used in conjunction with any tone generator, the 200EP-G permits wire and cable identification without having to make direct metallic contact with the conductor.
By selectively filtering out 60 HZ and its harmonics, the Greenlee Tempo (formerly Progressive Electronics) 200FP can be used with any tone generator for faster, more accurate cable and wire identification. Comes with the 200C belt holster.
Used in conjunction with any of our tone generators, the 200EP permits wire and cable identification without having to make direct metallic contact with the conductor. Powerful receiver gain permits accurate identification in even the most congested cable bundles and equipment rooms.
The Greenlee Tempo 200XP Multi-filter Tone Probe is designed to identify and trace wires or cables within a group without need of removing insulation. In addition, the 200XP has been specifically designed to filter out either “Power Line Hum” (green LED) or all signals except for a specific tracing tone (yellow LED).
The Greenlee Communications 500XP features a new 32-bit microcontroller, which allows for advanced digital signal processing. With effective filtering, low power consumption, and a rugged weather resistant body, the 500XP lets you trace wires for longer distances, and with greater accuracy than ever before.
CATV and Alarm Test Equipment
Designed specifically for the CATV industry, the 402K will send tone through any passive device along the cable path. Now you can tone through splitters, directional couplers and traps. No more long delays trying to figure out non-tagged or mistagged cable drops. The 402K is simple to use and provides fast, accurate results. The transmitter and receiver are equipped with female F-connectors and the kit provides both audible and LED test and tone indications.
The Model PE620 offers convenience, ease of use and true performance. As a continuity tester, Model PE620 can be connected to a Normally Open or Normally Closed loop pair and provides a distinct audible tone when the alarm condition occurs. The latching feature provides a simple method for identifying intermittent failures (swingers) and confirming operation of switches at remote locations. In the latching mode, the Model PE620 will catch the alarm condition and continue until the tester is reset.
To satisfy security & alarm industry requirements, Tempo has combined the Model PE620 Loop Verifier with the Model 200EP Inductive Amplifier in this convenient kit. Both units fit comfortably in the rugged woven polyester 700C Dual Carrying Case (all components available separately).
The new and improved CableScout® TV220 from Greenlee Communications delivers all the enhanced features that CATV and Telco technicians and network administrators have been asking for in a TDR for CATV applications. The TV220 finds faults other cable testers can't. High bandwidth, high resolution, high SNR and ease of use make the TV220 the only logical choice for digital services.
If your job is to find faults on coaxial cable, the Greenlee CableScout® TV90 is built for you. Designed specifically for CATV and other coaxial cable applications, the TV90 applies the newest technology to provide both ease of use and coaxial cable testing performance not found in any other TDR.
Telecommunications Test Equipment
Forget everything you've previously considered a "must have" in a professional quality telephone test set - Progressive Electronics has set a new standard. Our new series of telephone test sets offer technicians at every level the functions, features, and quality they need in this ever-changing world of communications. With leading edge designs in every aspect of these new models, you'll soon realize what we mean by "Gone to Extremes".
The Greenlee Communications Sidekick® Plus helps technicians diagnose and troubleshoot problems with twisted pair cable. Using the latest digital technology the Sidekick® Plus provides an easy-to-use, feature rich, multifunction test set for today's telecom engineer.
The Greenlee Tele-Mate TM-500 telephone test set offers the convenience of line powered operation and useful features like a high impedance monitor that is data and DSL safe, polarity test, speed dial, last number dialed and pulse dialing.
The Greenlee Tele-Mate TM-700 is a DSL compatible, smart telephone test set with an easy to read LCD for easy dialing, programming, caller ID, voltage, current, ringing, and DTMF measurements.
The Greenlee Tempo Sidekick T&N combines the functions of the Sidekick 7B plus the features of Transmission and Noise testing. The result is an even more versatile test set that identifies frequently missed faults as well as tests and qualifies the transmission quality of POTS lines.
The Greenlee Tempo 1144-5000 Sidekick T&ND is a multi-function test set that will improve any technician's testing and trouble shooting capabilities on twisted pair. It uses digital technology to combine VOM and loop current tests, longitudinal balance (Stress Test), transmission and noise, open locator, and load coil detection into one easy-to-use test set. The test functions can be selected and used individually, or run automatically by using the innovative Autotest.
The Sidekick 7B is the test set used in every major telephone company in the United States to troubleshoot twisted pair applications. This light-weight, hand-held meter quickly and accurately uncovers intermittent troubles that other test sets can't detect.
Model 88 does what no other affordable, hand-held tester can. It will identify the presence and count the number of load coils on an active or inactive circuit. No complicated screens or test instructions to decipher.
The NC-100 NETcat® Micro wiring tester is a device that verifies twisted pair and coaxial cables. It uses high-speed digital technology to check wiring continuity and correct allocation of wire pairs.
The NC-500 NETcat® Pro2 is a digital tool for fast, accurate checking of cables, wiring and network service.
The Model 468 Tester identifies open and short circuits, reversed and transposed pairs and alerts if connected to an active circuit, without harming the unit.
The Greenlee Tempo 468T is a replacement transmitter for the Greenlee Tempo 468 Wiremap tester.
The Greenlee Tempo 468R is a replacement receiver for the Greenlee Tempo 468 Wiremap tester.
XL fiberTOOLS™ Series
Professional Fiber Optic Instruments
Fiber Optic Cable Visual Fault Locator
Handheld visual fault locator is used to visually locate macrobends, poor splices, bad connectors, breaks in a fiber and tight fiber bends in single mode and multimode fiber optic cables.
Fiber Optic Power Meter
Do not confuse the small size of the 560XL with its ability to provide powerful results. The optical power meter is the perfect tool for installation and testing of fiber optic cabling.
850/1300nm LED Source
The 570XL is the perfect light source for performing insertion loss testing on multimode fiber optic cabling. Dual wavelength output (850nm and 1300nm) enables fast and accurate insertion loss measurements.
1310/1550nm Laser Source
The 580XL is the perfect light source for performing insertion loss testing on single mode fiber optic cabling. Dual wavelength output (1310nm and 1550nm) enables fast and accurate insertion loss measurements.
Multimode Fiber Optic Test Set
Kit containing 560XL, 570XL, SOC Adapter, and 914B Carrying Case. Available for FC, SC or ST connectors.
Singlemode Fiber Optic Test Set
Kit containing 560XL, 580XL, SOC Adapter, and 914B Carrying Case. Available for FC, SC or ST connectors.
Multimode and Singlemode Fiber Optic Test Set
Kit containing 560XL, 570XL, 580XL, SOC Adapter, and 915B Carrying Case. Available for FC, SC or ST connectors.
Fiber Optic Tools
Quickly and precisely trims the Kevlar strength member in fiber optic cable.
Resilient pad is perfect for PC (physical contact) pre-radiused ferrules.
The 910FS-KIT1 optical fusion splicer uses core alignment technology (not cladding alignment), which allows the technician to reliably fuse fiber optic cables with low splice losses. Includes: Optical Fusion Splicer and Optical Fiber Cleaver.
The FI-100 fiber identifier allows the technician to quickly determine the approximate core power and signal direction in a fiber optic cable without disconnecting the fiber.
The 910FS-KIT2 optical fusion splicer uses core alignment technology (not cladding alignment), which allows the technician to reliably fuse fiber optic cables with low splice losses. Includes: Optical Fusion Splicer, Optical Fiber Cleaver, Fiber Optic Stripper, and an extra battery.
Installation Tools & Products
A 50 foot (15meter) range allows faster installations with fewer pulls required. Bright yellow body makes it less likely to be left behind.
Glow-in-the-dark darts minimize replacement costs because they are easy to locate. Aerodynamic darts provide high accuracy and fast installation. Comes in a package of four.
Cuts cable, telephone wire and strips insulation. Tough, tempered steel knife blade holds its edge longer. Full-sized knife handle provides greater comfort.
Cuts cable, telephone wire and strips insulation. Tough, tempered steel knife blade holds its edge longer. Full-sized knife handle provides greater comfort.
Cuts cable, telephone wire and strips insulation.
Accessories & Replacement Parts
Optional headset that fits the Greenlee Tempo 501 Tracker II and 521A Wire and Valve Locator for use in high-traffic areas or other noisy environments.
Metal tips provide maximum performance when probing insulated wires or making direct metallic contact.
Plastic tips perform much the same as traditional metal tips while reducing the risk of shorting terminals.
Plastic tips perform much the same as traditional metal tips while reducing the risk of shorting terminals.
Plastic tips perform much the same as traditional metal tips while reducing the risk of shorting terminals.
These traditional telco-style clips can be used with almost any style cordset. Clips feature bent nose design for use on 66 style punchdown blocks and "bed of nails" penetrator for use on insulated wires. Two clips with red and black boots.
Fits classic 77 series tone generators.
For use with the PE620 tone generator.
For 200 series inductive amplifiers.
Allows you to build your own kit using any tone generator and 200 Series probe.
Designed to hold a complete set of wiring tools including: any (one) 77 Series Tone Generator, any (one) 200 Series Inductive Amplifier, a punchdown tool, a cabling knife and scissors.
