DA26S Distribution Amplifier - Do you have a paging and background music application that would benefit from a low cost, one-box solution? The DA 26 provides all of the tools needed to serve up to six zones. For even greater flexibility in source selection and zone distribution, combine the DA 26 with a Rane CP 52 or CP 64 music and paging preamplifier. Many existing solutions require installers to employ separate paging preamplifier, dynamics processor, crossover, distribution amplifier and remote-level-control devices. These systems are expensive and require a lot of wiring, yet fail to meet all of the requirements. The DA 26 provides all of the required features in one compact package.

CP64S Commercial Processor - The CP 64 is a versatile commercial preamplifier designed for use in restaurants, bars, health clubs and offices. It's the top of the CP Series, which include the CP 31 and CP 52. The CP 64 is capable of serving two independent Zones. Two gated Paging inputs and four Program inputs are provided. Ports are provided for expansion of Page, Program or Zone signals. Four levels of priority are supported: Priority Page, Non-Priority Page, Priority Program, and Non-Priority Program.

MLM-82S Stereo Mic/Line Mixer - The Rane MLM 82S features four balanced, studio grade, Mono Mic/Line Inputs with XLR jacks and 15 VDC phantom power. Each of the four Mic/Line inputs may be assigned to A, A+B or B outputs. Independent Level/Gain Trim controls and Signal/Overload indicators are provided for each Mic/Line input. The Phantom Power switch and the Mic/Line switches are located on the rear panel. Phantom power is removed from any input set for Line operation.

MLM-103 Mic/Line Mixer - The Rane MLM 103 Mic/Line mixer features six balanced, studio-grade microphone inputs and two balanced, stereo line-level inputs. The microphone preamplifiers feature direct outputs. These can monitor the signal 'pre' or 'post' the mix Level control via rear panel switches. Each microphone and stereo line input features three-band EQ and mix level controls. Input overload indicators are peak detecting and illuminate 4 dB before clipping. Three balanced outputs are provided. A and B outputs may be used as a stereo pair in a single zone or as two independent mono zones. The AUX output is mono. All connections are via Euroblock connectors.

SM26S Splitter Mixer - The Rane Model SM 26B Splitter Mixer is one of the most useful, yet unusual audio products available. In its most basic configuration, it is a six-to-two line level mixer. It will accept six balanced or unbalanced line level inputs which are applied to six Level and Pan controls. An additional stereo Master Input allows a total of eight inputs. The result of the mix is sent to an overall Master Output Level control and appears at the Left and Right Output jacks on the rear. In its splitter mode, the SM 26B can take one or two line level inputs and split these to any of the six Mono Outputs on the rear. The Mix/Pan controls in this mode control the level from each of the two input buses to be applied to each Output. Internal header blocks allow the Mix Output jacks to become an independent stereo out, allowing a total of eight outputs.

ME-15S MicroGraphic Equalizer - The Rane ME 15S is a two channel, 2/3-octave constant Q micrographic equalizer. The ME 15S utilizes compact 20 mm sliders, and features a Range switch for high slider resolution in the ±6 dB mode. The ±12 dB mode provides a wide range of control over system audio.

ME-30S MicroGraphic Equalizer - The Rane ME 30S is a single channel, 1/3-octave constant Q micrographic equalizer. The ME 30S utilizes compact 20 mm sliders, and features a Range switch for high slider resolution in the ±6 dB mode. The ±12 dB mode provides a wide range of control over system audio.