Vise Heads

The following heads are compatible with the 300 Standard Base, the 305 Low-Profile Base, and the 380 Vacuum Base. A new or additional head will add extra productivity to your existing PanaVise, or start here to build your own! All stems at 5/8" (15.9mm) in diameter. All PanaVise vises and work holding devices come with a "lifetime warranty."

Model 203

PV Jr. Head

Perfect for at-home hobbyists and electronics enthusiasts.
Grooved jaws open to 2-7/8" (73mm). Jaws are 1" wide(25.4mm) and 2" tall (50.8mm).
The stem is 1" (25.4mm) long and 5/8" (15.9mm) in diameter.
Overall height is 3-3/4" (95.2mm).
Neoprene Jaw Pads are available for holding extremely delicate items.

Part #	Description	Lashen's Price
203	PV JR. VISE HEAD W5/8" SHAFT FOR 300 SERIES BASES	$35.98

Model 303

Standard Head

Jaws open to 2-1/4" (57.1mm). Jaws are 2-1/2" wide (63.5mm).
The stem is 2-1/8" (54mm) long and 5/8" (15.9mm) in diameter.
The Nylon Jaws have a satin finish to improve grip. Steel, brass, Teflon ® and grooved nylon jaws are available as accessories for this head.
As a general purpose head, you can't go wrong with its exceptional strength and quality.

Part #	Description	Lashen's Price
303	STANDARD HEAD	$41.98

Model 304

Low-Profile Head

The Low-Profile Head has the same basic mechanical features as the 303 Standard Head, except that the stem is cast into the base of the head to allow close positioning to the work surface.
When used with the 305 Low-Profile Base the head can be swung out and away from the bench surface.
Jaws open to 2-1/4" (57.1mm). Jaws are 2-1/2" wide (63.5mm).
The stem is 1-5/8" (43.1mm) long and 5/8" (15.9mm) in diameter.
Steel jaws may be interchanged with any of the accessory jaws.
Overall length is 7-3/4" (196.8mm).

Part #	Description	Lashen's Price
304	LOW PROFILE HEAD	$59.98

Model 337

Fixturing Head

The 337 Fixturing Head allows permanent fixturing for production line assembly or repetitive repair. Work can be bolted to this head easily because of its six slots and bolt holes.
The flat round surface is 5-3/8" (136.5mm) in diameter.
The steel stem is die cast into the aluminum head and is 2" (50.8mm) long and 5/8" (15.9mm) in diameter.
Overall Height (stem to top of head) is 3-3/4" (95.2mm).

Part #	Description	Lashen's Price
337	FIXTURING HEAD	$34.48

Model 366

Wide Opening Head

This head is a versatile, general purpose electronics head created especially for production lines, technicians, and designers.
Jaws open to 6" (152.4mm) to accommodate most PC boards in its molded, deep-ribbed neoprene jaw pads. When pads are reversed, the wide "V" can be used for securing delicate items, such as tuners, coils, motor armatures, etc.
The jaw's control knob is micro-adjustable so it exerts the exact amount of pressure you need.
The stem is 2 1/4" (57.1mm) long and 5/8" (15.9mm) in diameter.
Overall height is 5 1/8" (130.2mm).

Part #	Description	Lashen's Price
366	WIDE OPENING HEAD	$64.48

Model 376

Extra Wide Opening Head

The double action jaws on the 376 Self-Centering Extra Wide Opening Head allow fast opening and closing.
The self-centering feature lets you hold heavier objects because the weight is centered over the base.
Jaws open to 9" (228.6mm).
The jaw plates can be reversed to close together, and the reversible jaw pads feature ribbing on one side and a deep "V" groove on the other.
The stem is 2 1/4" (57.1mm) long and 5/8" (15.9mm) in diameter.
Overall height is 5 1/4" (133.3mm).

Part #	Description	Lashen's Price
376	SELF-CENTERING, EXTRA WIDE OPENING HEAD	$82.48

Model 385

Micrometer Head

Micrometer Holder gently, yet firmly holds micrometers of all sizes.
Neoprene pads open 1/2" (12.7mm).
Jaws also close to zero, for holding thin items such as micro sized circuit boards.
Throat depth is 1" (25.4mm).
The stem is 1.4" (35.6mm) long and 5/8" (15.9mm) in diameter.
Overall height is 3.3" (83.8mm).