LAN Cable Testers

LAN ProNavigator™

Test data & telephone cable for proper pairing for EIA/TIA-568A & B, Token Ring, 10 Base T & common Cat5,Cat5e, Cat6 configurations. Also tests continuity of 50 & 75 ohm coaxial cables with BNC terminations.

The LAN ProNavigator™ features:

• One-button, simple testing (PASS/FAIL or fault find) to detect: good connections, opens, crossed wires & split pairs
• Traces wires with tone & remote lights
• Quick fault analysis
• Compact & lightweight
• Comfortable to hold
• Low battery test
• Auto-off to preserve battery
• Lanyard holes embedded in case to attach to wrist or belt

Specifications:

• Simple PASS/FAIL test results in one second allows technicians to quickly move on to the next test site.
• Generates oscillating audio tone for use with tone probes to locate cables.
• Tests data and telephone cables up to 320 feet (100 meters) for proper pairing for EIA/TIA-568A, EIA/TIA-568B, Token Ring, 10 Base T, and common Category 5 configurations.
• Tests unshielded UTP and shielded STP data cable.
• Detects good connections, open connections, crossed wires and split pairs.
• Tests common BNC connected 50 and 75 ohm coaxial cables up to 320 feet (100 meters) for continuity.
• Tests coaxial cable types RG58, RG59, RG6, Belden 8281, RG8, RG11 and more.
• Shows test results at both ends of cable.
• Belt clips provided and lanyard holes embedded in case to attach to belt or wrist.
• Uses standard 9-volt dc battery with auto-off function to preserve battery life.

Features:

• Save time with test results at both ends
• Multi-function tester so you carry less gear to jobsite
• Easy-to-use - shows test results in seconds
• Auto-off 9-volt battery saver
• Belt clip & lanyard holes keep the tester close by
• Slim, comfortable design preferred by professionals
• Tackles any wiring job - coax & data

LAN ProNavigator™ Complete Test Kit

If you’re a technician on the go, you need the LAN ProNavigator™ from Paladin Tools! Two-piece tester includes main unit and remote with test results at both ends.

Kit Includes:

• 2 RJ45 patch cords
• 2 BNC coaxial cables
• 2 CATV "F"-to-BNC adapters
• 1 shielded RJ45 coupler
• 2 belt clips
• 9V battery
• Durable hard case with custom fit foam insert

The LAN ProNavigator™ features:

• One-button, simple testing (PASS/FAIL or fault find)
• Traces wires with tone & remote lights
• Quick fault analysis on coax & data cables
• CAT-5 or CAT-6 (UTP/STP) cable testing
• Detects Opens, Shorts, Crossed Wires & Split Pairs
• Compact & lightweight, comfortable to hold
• Designed & manufactured in the USA
• Test status at both ends (main unit & remote)

• Simple PASS/FAIL test results in one second allows technicians to quickly move on to the next test site.
• Generates oscillating audio tone for use with tone probes to locate cables.
• Tests data and telephone cables up to 320 feet (100 meters) for proper pairing for EIA/TIA-568A, EIA/TIA-568B, Token Ring, 10 Base T, and common Category 5 configurations.
• Tests unshielded UTP and shielded STP data cable.
• Detects good connections, open connections, crossed wires and split pairs.
• Tests common BNC connected 50 and 75 ohm coaxial cables up to 320 feet (100 meters) for continuity.
• Tests coaxial cable types RG58, RG59, RG6, Belden 8281, RG8, RG11 and more.
• Shows test results at both ends of cable.
• Belt clips provided and lanyard holes embedded in case to attach to belt or wrist.
• Uses standard 9-volt dc battery with auto-off function to preserve battery life.

• Save time with test results at both ends
• Multi-function tester so you carry less gear to job site
• Easy-to-use––shows test results in seconds
• Auto-off 9-volt battery saver
• Belt clip & lanyard holes keep the tester close by
• Slim, comfortable design preferred by professionals
• Tackles any wiring job––coax & data

Data/Link ID and Cable-Check™

This handy unit is a multi-purpose continuity tester and network identifier.

Features

• Tests UTP, STP & flat satin cables with RJ45 terminations
• Tests both data & phone connection schemes including patch cords & installed cables to identify:
  • Good connections
  • Opens
  • Shorts
  • Cross-connections
• Identifies data & link transmission speeds with real time detection: 100 MB & 10 MB
• Detect PC (NIC) and HUB data transmissions and PC (NIC) & HUB NLP or FLP link pulse

Advantages

• Multi-purpose tester at an affordable price
• Selectable scan speed: fast or slow
• Identifies cross-over telephone connections
• Maps LAN cabling or patch cords
• Low-battery detection in LAN ID mode
• Includes 2 RJ45 patch cords, 9V battery & durable, nylon carrying case with belt loop

PC Cable-Check™ Pro

This new universal tester maps cables, detects good connections, opens, shorts or crosses. It works with over 20 types of cables including: LAN & telephone, Serial, coaxial, USB, VGA, Mini-USB, S-video, FireWire, PS/2 keyboard & parallel printer.

Features

• Auto scan or manual scan modes
• Rubber feet to grip to desk or bench to prevent slipping
• Power shuts off after 30 seconds of non-use to conserve battery
• Rugged case now with built-in handle for easy transport
• 9V battery included
• Tests cables with the following terminations:
  • Modular plugs: RJ45, RJ11, RJ12 UTP/STP
  • Coaxial: BNCs & CATV "F" (BNC-to-F adapter required; not included)
  • D-sub: 9-, 15- & 25-pin
  • HD-sub: 15-pin
  • USB: A, B, & mini 5-pin
  • 1394 FireWire: 4- & 6-pin
  • Centronics: 36-pin printer

Advantages

• Universal tester for all computer cables
• Quickly & easily troubleshoot or map cable pin-out
• Easy to read & understand with LED indicator lights
• True cable mapping
• Affordable diagnostic tool

LAN & A/V Cable-Check™

Quickly and easily test RJ45, cable TV "F", RCA, and BNC cabling used in smart home installations.

Features

• Tests RJ45 patch cords and network installations to identify good connections, opens, shorts or cross-connections
• Connection type: RJ45 UTP or STP modular plug & cable TV "F" coaxial
• Identifies data and telephone connection schemes
• Maps cable pin-out
• Tests continuity of cable TV cables and installed cable runs
• Battery life for 15 hours continuous use
• Max. length: 1,650' (500 m)

Advantages

• Combination network and coax tester
• Automatic scanning
• User selectable slow or fast speeds
• Quickly check cable installations and patch cords
• Easy-to-use with clear LED read-outs
• Includes: 2 RJ45 patch cords, 75ohm male terminator, CATV "F" Female adapter, 2 CATV "F" (Male) to BNC (Female) adapter, 2 CATV "F" (Male) to RCA (Female) adapter, 9V battery and durable nylon carrying case

Type

• Cat5
• Cat5e
• Cat6
• RG6
• RG6 Quad
• RG59

Connector style

• RJ45
• CATV "F"
• RCA
• BNC

RJ45 modular adapter (8-way)

Use these adapters to connect butt sets, telephone test sets, tone generators and network test equipment to data and telephone lines using modular plug connections to test the data and signals being carried. Nylon-reinforced ABS plastic body Easy-to-read wire layout Removable/replaceable patch cord Inline adapters Snagless plugs Belt clip Notched copper contacts keep alligator clips attached during testing One-year warranty Nylon-reinforced ABS plastic body

• Easy-to-read wire layout
• Removable/replaceable patch cord
• Inline adapters
• Snagless plugs
• Belt clip
• Notched copper contacts keep alligator clips attached during testing
• One-year warranty

RJ11 modular adapter (6-way)

Use these adapters to connect butt sets, telephone test sets, tone generators and network test equipment to data and telephone lines using modular plug connections to test the data and signals being carried. Nylon-reinforced ABS plastic body Easy-to-read wire layout Removable/replaceable patch cord Inline adapters Snagless plugs Belt clip Notched copper contacts keep alligator clips attached during testing One-year warranty Nylon-reinforced ABS plastic body

• Easy-to-read wire layout
• Removable/replaceable patch cord
• Inline adapters
• Snagless plugs
• Belt clip
• Notched copper contacts keep alligator clips attached during testing
• One-year warranty