DRK Series Cable Management Enclosures

30" wide profile supports high-density cable management

  • UL Listed in the US and Canada
  • Fully welded construction provides:
    • Static load capacity: 10,000 lbs.
    • UL Listed load capacity: 2,500lbs.
    • Seismic Certified load capacity: 815 lbs.
  • Seismic certified to the following codes and standards: 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity - Zone 4 or Seismic Design Category (SDC) "D". These are designed for Mission Critical and/or High-Importance Installations in locations with the highest level of seismicity and top floor or rooftop installations including those within UBC and CBC Essential facilities or IBC, ASCE 7, and NFPA 5000 Seismic Use Group III facilities. For all codes, the Importance factor (Ip) is 1.5. Seismic Certified load capacity of 755 lbs. when used with DRK-Z4 seismic floor anchor brackets.
  • 30" OD width. 31-1/2", 36" and 42" OD depth
  • OSHPD approved for fixed equipment anchorage in California healthcare facilities
  • 1/2", 3/4", 1" and 1-1/2" electrical knockouts found on removable split rear plates, top knockout plate additionally includes UHF/VHF antenna knockouts
  • Factory configured 19" EIA panel width DRK enclosure additionally outfitted with pair of keylocked side panels, plexi front door and leveling feet, 10" fan top with guard, available for easier ordering and to save installation time (DRK19-44-31K)
  • 19" EIA panel width enclosures come standard with two front-mounted vertical cable ducts featuring abundant cable entry points and a full-length hinged door with three-point magnetic catches
  • Standard vented rear door is reversible to allow opening from either direction
  • Vented, plexiglass, and vented-plexiglass front doors available
  • Top accommodates 10" fan and includes fan guard for ventilation
  • Includes 100 rack screws
  • Stud in base of enclosure facilitates the proper grounding and bonding of electronic equipment, as per NEBS and NEC standards
  • Durable black textured powder coat finish
Rackrail is labeled in EIA standard

Rackrail is labeled in EIA standard
rackspace increments allowing
easy equipment alignment.

A&E Spec

#96-967 Download or view PDF file 19" panel width

19" Panel Width

DRK19-44-31

19PANLW,44SP,31DP DRKW/DCT

Weight: 200 lbs.   Power Strip Size: NPRT

Lashen's Price: $ 1,797.00

DRK19-44-31K

19,44SP,31DP DRK,CONFIG

Weight: 406 lbs.   Power Strip Size: NPRT

Lashen's Price: $ 3,006.75

DRK19-44-31LRD

19,44SP,31DP DRK W/O REARDR

Weight: 167 lbs.   Power Strip Size: NPRT

Lashen's Price: $ 1,705.50

DRK19-44-31PRO

19,44SP,31DP DRK W/CAGERL

Weight: 200 lbs.   Power Strip Size: NPRT

Lashen's Price: $ 1,878.75

DRK19-44-36

19,44SP,36DP DRK 10-32RAIL

Weight: 264 lbs.   Power Strip Size: NPRT

Lashen's Price: $ 2,010.00

DRK19-44-36LRD

19,44SP,36DP DRKW/O REARDR

Weight: 190 lbs.   Power Strip Size: NPRT

Lashen's Price: $ 1,917.00

DRK19-44-36PRO

19,44SP,36DP DRK W/CAGERAIL

Weight: 277 lbs.   Power Strip Size: NPRT

Lashen's Price: $ 2,092.50

DRK19-44-36PROLRD

19,44SP,36D DRK W/PRO RAIL,LRD

Weight: 220 lbs.   Power Strip Size: NPRT

Lashen's Price: $ 1,999.50

DRK19-44-42

19PANLW,44SP,42"DP DRK W/DCT

Weight: 274 lbs.   Power Strip Size: NPRT

Lashen's Price: $ 2,276.25

DRK19-44-42LRD

19PANLW,44SP,42"DP DRK W/DCT,LRD

Weight: 291 lbs.   Power Strip Size: NPRT

Lashen's Price: $ 2,180.25

DRK19-44-42PRO

19PANLW,44SP,42"DP DRK W/CAGE RAIL

Weight: 267 lbs.   Power Strip Size: NPRT

Lashen's Price: $ 2,359.50

DRK19-44-42PROLRD

19PNLW,44SP,42"DP DRK W/CAGE RAIL,LRD

Weight: 291 lbs.   Power Strip Size: NPRT

Lashen's Price: $ 2,263.50