115 Volt Rackmount Power Strips

front of PD-2015R-NS with standard mounting ears

Front of PD-2015R-NS

Rear of PD-2015R-NS

Multi-mount Power Installed in Rack

PD-2015R-HH-NS with ears rotated for sideways mounting

Designed to optimize space and efficiency in power management, the new single circuit, 15 Amp rackmount power distribution system provides 20 total outlets within a shallow depth.

• Versatile design allows for the unit to be mounted either horizontally or vertically in the rack
• Shallow 4" depth
• 20 total outlets (10 on front of unit, 10 on rear of unit)
• 9', 14 gauge Signal Safe™ power cord minimizes the effects of AC magnetic fields
• Reversible, adjustable mounting ears provide more flexible installation options with either 0° or 90° mounting
• Outlets are oriented in various directions to accommodate plugs of different shapes, sizes and orientations. When installed with 90° orientation, the unit supports heavy "wall wart" power supply plugs.

front of PD-2015R-HH-NS shown with deeper set of ears for recessed mounting

#96-01095 Download or view PDF file

Rack Light with 15 Amp Power Distribution, Features 2 Stage Surge Suppression and Notification

The new PDLT-815RV-RN Series rack light is equipped with 8 circuit breaker protected rear outlets. Unit features two stage surge and spike protection and EMI filtering. Clean ground surge suppressor design will not pass noise contamination to the ground. The PDLT-815RV-RN provides notification to any customer supplied monitoring device when surge protection has been completely compromised. The retractable light extends 4-1/2" when pressed. Generous 13-1/2" depth provides easy access to the vertically oriented, 15 Amp rear outlets, which have been spaced to accommodate plug-in power supplies, while the extra-long 9' cord eliminates the need for an additional extension cord. An illuminated combination power switch/circuit breaker is located on the front panel. Two USB ports on the rear panel accommodate the NEW LT-GN gooseneck LED light for additional illumination of rack. Finished in a durable black powder coat finish and occupies one rack space.

#96-01044 Download or view PDF file

Designer Inspired PDLT-815RV Series Rack Light with 15 Amp Power Distribution

The new PDLT-815RV Series rackmount power distribution units with retractable light are equipped with 8 circuit breaker protected rear outlets. protected rear outlets. Unit features surge and spike protection and EMI filtering. Clean ground surge suppressor design will not pass noise contamination to the ground. The retractable light extends 4-1/2" when pressed. Dimmable LED bar illuminates automatically for easy component viewing. Generous 13-1/2" depth provides easy access to the vertically oriented, 15 Amp rear outlets, which have been spaced to accommodate plug-in power supplies, while the extra-long 9' cord eliminates the need for an additional extension cord. Two USB ports on the rear panel accommodate the NEW LT-GN gooseneck LED light for additional illumination of rack. Features a visually pleasing black brushed and anodized design and dimmable logo with dimmer switches hidden underneath the retractable light for installations where aesthetics are a concern. Occupies one rack space.

#96-01044 Download or view PDF file

Rackmount Light, Flat Black Powdercoat

Rackmount light occupies one rack space and provides ambient lighting to front and rear of rackmount components.

• Provides evenly distributed illumination for component viewing
• Retractable light shelf with dimmable LED light bar
• Choice of finishes: black powdercoat, black brushed and anodized, silver brushed and anodized
• Attractive, dimmable LED logo optional (LT-1RA, LT-1RC)
• Two rear USB style output ports for connection of LED gooseneck work lights (LT-GN)

#96-01050 Download or view PDF file

Rackmount Light, Black Brushed and Anodized

Rackmount light occupies one rack space and provides ambient lighting to front and rear of rackmount components.

• Provides evenly distributed illumination for component viewing
• Retractable light shelf with dimmable LED light bar
• Choice of finishes: black powdercoat, black brushed and anodized
• Attractive, dimmable LED logo optional (LT-1RA, LT-1RC)
• Two rear USB style output ports for connection of LED gooseneck work lights (LT-GN)

#96-01050 Download or view PDF file

Gooseneck Light

Using USB ports on select Middle Atlantic Products power products, the LT-GN gooseneck light turns on by a power switch on the unit and illuminates components and cable connections with its ultra-bright LED bulbs. Adjustable 10-1/2" chrome gooseneck allows complete customization. NEW LT-GN-PL also features a power supply with standard 120V plug.

Rackmount Power units provide economical power distribution and remote status notification

The PD-915RV-RN rackmount power distribution unit with local and remote notification of surge suppression status is equipped with 8 rear outlets and one front outlet. Two front LED status indicators display the level of protection provided by the unit's 2 stage surge and spike suppression. The PD-915RV-RN provides notification of surge suppression status to any customer supplied monitoring device. The 9" depth provides easy access to the vertically oriented, 15 amp rear outlets, which have been spaced to accommodate plug-in power supplies. Clean ground surge suppressor design will not pass noise contamination to the ground. Two USB ports on back panel accommodate LT-GN gooseneck LED light for additional illumination of rack. This unit features a generous 9 foot cord and an illuminated combination power switch/circuit breaker. Finished in a durable black powder coat and occupies one rackspace.

UL File #: E204950
UL Standard: 1419

#96-01041 Download or view PDF file

9 Outlet, 20 Amp, 115 Volt Rackmount Power Strip

PD-920R-NS front

PD-920R-NS rear

The PD-920R-NS rackmount 20 amp power distribution unit is equipped with 8 circuit breaker protected rear outlets (NEMA 5-20R), and one 15 amp front outlet (NEMA 5-15R). The generous 9" depth provides easy access to the yoke-mounted rear outlets, while the extra-long 9' AC cord eliminates the need for an additional extension cord. An illuminated power switch is located on the front panel, and a 20 amp circuit breaker is located in the rear. Occupies one rackspace.

UL File #: E204950
UL Standard: 1419

#96-939 Download or view PDF file

9 Outlet 115 Volt Rackmount Power Strip

PD-915R front

PD-915R rear

The PD-915R rackmount power distribution units is equipped with 8 rear outlets, and one front outlet. Standard equipment includes surge and spike protection, EMI filtering, and a 9' cord. A generous 9" depth offers easy access to the 15 amp rear panel outlets which are solidly mounted on yokes to eliminate deflection. An illuminated combination power switch/ circuit breaker is located on the front panel. Occupies one rackspace.

UL File #: E204950
UL Standard: 1419

#96-939 Download or view PDF file

Rackmount Power Distribution Comes In Three Finishes

PD-815R-PL front

PD-815RA-PL front

PD-815RC-PL front

PD-815 Series rear

The PD-815 series rackmount power distribution units are equipped with 8 rear outlets and feature a front pilot light for status indication. Standard equipment includes surge and spike protection, EMI filtering and a 9' cord. A generous 9"depth provides easy access to the 15 amp rear panel outlets which are solidly mounted on yokes to eliminate deflection. Available with a black brushed and anodized, silver brushed and anodized or textured face, occupies one rackspace.

UL File #: E204950
UL Standard: 1419

#96-939 Download or view PDF file

6 Outlet 115 Volt Sequencing Rackmount Power Strip

PDS-615R front

PDS-615R rear

The model PDS-615R sequencing 15 amp power distribution unit provides 6-step sequencing to 6 rear outlets. Adjustable start time delay allows daisy-chaining of up to (3) PDS-615Rs to act as a single unit. Sequencing intervals are facilitated via front panel controls, while all sequencing activity is monitored by a series of LED indicators also found on the front panel. Additionally, a remote up/down sequencing connection block is located on the rear panel which facilitates daisy-chaining and remote control. Like the PD-915R, the PDS-615R measures 8-3/4" deep and comes with a 9' cord. An illuminated combination power switch/circuit breaker is located on the front panel. Occupies one rackspace.

#96-940 Download or view PDF file

6 Outlet 115 Volt Sequencing Rackmount Power Strip

PDS-620R front

PDS-620R rear

The model PDS-620R rackmount power sequencing power distribution unit provides 6-step sequencing to 6 rear outlets. Adjustable start time delay allows daisy-chaining of up to 3 sequencers to act as a single unit. Sequencing intervals are facilitated by front panel controls, while all sequencing activity is monitored through a series of LED indicators. A remote up/down sequencing connection block is located on the rear panel, which facilitates daisy-chaining and remote control. The PDS Series power distribution units measure 8-3/4" deep and come with a 9' cord. An illuminated combination power switch/circuit breaker is located on the front panel. UL Listed in the US and Canada. Occupies one rackspace.

#96-940 Download or view PDF file

6 Outlet 115 Volt, Two 15A Circuit Sequencing Rackmount Power Strip

PDS-2X315R front

PDS-2X315R rear

The model PDS-2X315R rackmount power sequencing power distribution unit provides 6-step sequencing to 6 rear outlets. Adjustable start time delay allows daisy-chaining of up to 3 sequencers to act as a single unit. Sequencing intervals are facilitated by front panel controls, while all sequencing activity is monitored through a series of LED indicators. A remote up/down sequencing connection block is located on the rear panel, which facilitates daisy-chaining and remote control. The PDS Series power distribution units measure 8-3/4" deep and come with a 9' cord. An illuminated combination power switch/circuit breaker is located on the front panel. UL Listed in the US and Canada. Occupies one rackspace.

#96-940 Download or view PDF file

RPS Series Remote Power Switch

features easy to use
"Piggy-back" 15 amp plug

The NEW RPS Series remote power switch provides the ability to power complete 15 amp systems on and off without the need to access equipment. Perfect for installations where it is desirable to keep users from having the ability to make any adjustments, the RPS Series power switch mounts in the face of select racks, and is also available to mount in a single space panel or UCP Series Universal Connector Panel. Available in a switched model for non-secure areas, the RPS has been tested in the most demanding situations and is UL Listed in the US and Canada for safety. The RPS fits in any Decora™ opening, features removable ears and can also be mounted to any flat surface. The RPS has an internal 21 amp switch for better reliability and longevity.

DWR, SR, TOR and ISRK Series enclosures feature Decora™ knockouts for mounting of the RPS Series remote power switch without the need for any additional accessories.

FITS IN ANY DECORA™ OPENING!

UL File #: E232496
UL Standard #: 244A: Appliance Controls
120 VAC, 15 Amps, 60 Hz

#96-01028 Download or view PDF file

RPS Series Keylocked Remote Power Switch

features easy to use
"Piggy-back" 15 amp plug

The NEW RPS Series remote power switch provides the ability to power complete 15 amp systems on and off without the need to access equipment. Perfect for installations where it is desirable to keep users from having the ability to make any adjustments, the RPS-K Series power switch mounts in the face of select racks, and is also available to mount in a single space panel or UCP Series Universal Connector Panel. Keylocked for where security is a concern, the RPS has been tested in the most demanding situations and is UL Listed in the US and Canada for safety. The RPS fits in any Decora™ opening, features removable ears and can also be mounted to any flat surface. The RPS has an internal 21 amp switch for better reliability and longevity.

DWR, SR, TOR and ISRK Series enclosures feature Decora™ knockouts for mounting of the RPS-K Series remote power switch without the need for any additional accessories.

FITS IN ANY DECORA™ OPENING!

UL File #: E232496
UL Standard #: 244A: Appliance Controls
120 VAC, 15 Amps, 60 Hz

#96-01028 Download or view PDF file

UCP-RPS

NEW the UCP Series Universal Connector Panel mounts the RPS in any UCP system , or into the knockouts provided on the DWR, SR, PTRK and TOR Series enclosures.

1-3/4" (1 space) Decora® panel, mounts up to 4 Decora® switches

NEW One space Decora® laser knockout panel available to mount the RPS Series remote power switch and other low-voltage Decora® devices directly onto the rackrail of any standard 19" enclosure. Mounts up to 4 Decora® devices, finished in flat black powder coat.

1-3/4" (1 space) Decora® panel pre-configured with 2 LT-DEC lights

NEW One space Decora® laser knockout panel pre-configured with the NEW LT-DEC Decora® mount lights finished in flat black powder coat.

1-3/4" (1 space) Decora® panel pre-configured with 2 LT-DEC lights and 1 TEMP-DEC

NEW One space Decora® laser knockout panel pre-configured with two of the NEW LT-DEC Decora® mount lights and one of the NEW TEMP-DEC Decora® mount temperature display finished in flat black powder coat.

1-3/4" (1 space) Decora® panel pre-configured with 1 TEMP-DEC

NEW One space Decora® laser knockout panel pre-configured with one of the NEW TEMP-DEC Decora® mount temperature display finished in flat black powder coat.

Decora® mount retractable LED light

See what you're doing with the NEW LT-DEC light. Designed to fit any standard Decora® opening, the LT-DEC opens and illuminates when pressed. Running on a standard included 12 VDC power source, multiple units can be daisy-chained together to use only one outlet with the NEW JDC-12X18 jumper. The jumper reduces the number of power supplies required for an installation and can be used to power the NEW TEMP-DEC Decora® temperature display.

NEW Decora® Mount Temperature Display

How hot is your rack? The Decora Mount Temperature Display monitors internal enclosure temperature, provides an LED readout and fits into any Decora style opening. Features adjustable over temperature setting and local and remote overtemp notification. 9' cord with temperature probe and UL Listed plug-in power supply included. Optional jumper supplies power to additional 12 VDC Decora units using a single power source. DWR, SR and ISRK Series enclosures feature Decora knockouts for mounting of the TEMP-DEC temperature display without the need for any additional accessories.

#96-01055 Download or view PDF file

18", 12 volt DC jumper wire, 2 pieces

The NEW JDC-12X18 jumper reduces the number of power supplies required for an installation and can be used to power the NEW TEMP-DEC Decora® temperature display.

Need additional keys? Replacement sets are available, sold in sets of two.

#96-01028 Download or view PDF file