DHC Receivers - Green Line

1000W Scene-Capable Dimming Switch

Provides one-button programming through address capturing. Provides manual and remote ON/OFF switching and full range dimming for larger incandescent and magnetic low-voltage lighting loads such as chandeliers and multiple high-hats. Provides Scene Control capability when used with DHC Scene Controller HCCS7-1TW and HCCPG-1TW DHC Toscana Deluxe Programmer. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers. Provides multi-station manual and remote ON/OFF switching and full range dimming when used with Cat. No. MS00R-10 Multi-Remote Unit. Equipped with Leviton's exclusive Intellisense™ Technology for the utmost in reliability, even where electrical “noise” exists on the power line. Packed with Ivory and White snap-on Rocker and Frame Kits. Kits for other colors must be purchased separately.

Responds to ON, OFF, DIM, BRIGHT, ALL LIGHTS ON/ALL OFF and SCENE LIGHTING commands.

Rated: 120V 60Hz, 1000W Incandescent, 1000VA (750W) Magnetic Low-Voltage Lighting

As with every dimmer, derating for multiple gang installations is required.

NOTE: A Cat. No. HCA02-10E DHC System Amplifier Module must be installed in every DHC installation to ensure maximum signal strength. In some installations more than one may be required.

Features:

• New one-button programming through address capturing for easy programming
• Provides Scene Control capability when used with DHC Scene Controller HCCS7-1TW or HCCPG-1TW DHC Toscana Deluxe Programmer for varying function and mood lighting schemes in living rooms, home theaters and other rooms at the touch of a button. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers
• Soft ON/Fade OFF feature for smooth increasing and lowering of brightness levels; extended bulb life
• Preset feature turns lights ON at last selected brightness level; eliminates the need to readjust settings each time dimmer is switched ON
• Fits in standard wall boxes and replace regular switches to provide manual and remote ON/OFF switching, full range dimming and Scene Lighting Control
• Protected memory maintains light levels during minor power fluctuations
• Features Leviton's Intellisense™ Technology (gated automatic gain control) which adjusts receiver sensitivity to help eliminate signal problems due to line noise
• Use existing 60Hz 120V AC house wiring to add multi-location switching without resorting to complicated and costly conventional wiring means
• Double tap to top of rocker switch brings light to full output without affecting preset levels
• Neutral connection should be used whenever possible but not required for incandescent loads.
• True Decora-style operation—push top of rocker to brighten; bottom to dim
• Programmable in 1% increments to customize any number of lighting scenes (Requires use of separate software module)

1000W Scene-Capable Dimming Switch with LEDs

Provides one-button programming through address capturing. Provides manual and remote ON/OFF switching and full range dimming for larger incandescent and magnetic low-voltage lighting loads such as chandeliers and multiple high-hats. Provide Scene Control capability when used with DHC Scene Controller HCCS7-1TW and HCCPG-1TW DHC Toscana Deluxe Programmer. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers. Provide multi-station manual and remote ON/OFF switching and full range dimming when used with Cat. No. MS00R-10 Multi-Remote Unit. Equipped with Leviton's exclusive Intellisense™ technology advanced circuitry for the utmost in reliability, even where electrical "noise" exists on the power line. Packed with Ivory and White snap-on Rocker and Frame Kits. Kits for other colors must be purchased separately.

Responds to ON, OFF, DIM, BRIGHT, ALL LIGHTS ON/ALL OFF and SCENE LIGHTING commands.

Rated: 120V 60Hz, 1000W Incandescent, 1000VA (750W) Magnetic Low-Voltage Lighting

As with every dimmer, derating for multiple gang installations is required.

NOTE: A Cat. No. HCA02-10E DHC System Amplifier Module must be installed in every DHC installation to ensure maximum signal strength. In some installations more than one may be required.

Features:

• New one-button programming through address capturing for easy programming
• Provide Scene Control capability when used with DHC Scene Controller HCCS7-1TW or HCCPG-1TW DHC Toscana Deluxe Programmer for varying function and mood lighting schemes at the touch of a button. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers
• Soft ON/Fade OFF feature for smooth increasing and lowering of brightness levels; extended bulb life
• Preset feature turns lights ON at last selected brightness level; eliminates the need to readjust settings each time dimmer is switched ON
• Square green LED display alongside rocker indicates selected brightness level
• Locator LED illuminates when lights are OFF
• Fit in standard wall boxes and replace regular switches to provide manual and remote ON/OFF switching, full range dimming and Scene Lighting Control
• Protected memory maintains light levels during minor power fluctuations
• Features Leviton's Intellisense™ Technology (gated automatic gain control) which adjusts receiver sensitivity to help eliminate signal problems due to line noise
• Use existing 60Hz 120V AC house wiring to add multi-location switching without resorting to complicated and costly conventional wiring means
• Double tap to top of rocker switch brings light to full output without affecting preset levels
• Neutral connection should be used whenever possible but not required for incandescent loads.
• Programmable in 1% increments to customize any number of lighting scenes (Requires use of separate software module)

1000W Scene-Capable Dimming Switch with LEDs and 2-Way Communication

Provides one-button programming through address capturing. Two-way status reporting to status-tracking-capable controllers and programmers (Example: DHC Toscana Programmer). Single-pole (one location) provides manual and remote ON/OFF switching and full range dimming for larger incandescent and magnetic low-voltage lighting loads such as chandeliers and multiple high-hats. Provides Scene Control capability when used with DHC Scene Controller HCCS7-1TW and HCCPG-1TW DHC Toscana Deluxe Programmer. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers for scene control only (Not 2-way communication). Single-Pole applications ONLY. Unit equipped with Leviton's exclusive Intellisense™ Technology advanced circuitry for the utmost in reliability, even where electrical "noise" exists on the power line. Packed with Ivory and White snap-on Rocker and Frame Kits. Kits for other colors must be purchased separately.

Responds to ON, OFF, DIM, BRIGHT, ALL LIGHTS ON/ALL OFF and SCENE LIGHTING commands.

Rated: 120V 60Hz, 1000W Incandescent, 1000VA (750W) Magnetic Low-Voltage Lighting

As with every dimmer, derating for multiple gang installation is required.

NOTE: A Cat. No. HCA02-10E DHC System Amplifier Module must be installed in every DHC installation to ensure maximum signal strength. In some installations more than one may be required.

Features:

• 2-Way status reporting to status-tracking-capable controllers and programmers registers status changes when manually changed locally (Example: DHC Toscana Deluxe Programmer)
• New one-button programming through address capturing for easier programming
• Provides Scene Control capability when used with DHC Scene Controller HCCS7-1TW or HCCPG-1TW DHC Toscana Deluxe Programmer for varying function and mood lighting schemes in living rooms, dinning rooms and other rooms. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers
• Soft ON/Fade OFF feature for smooth increasing and lowering of brightness levels; extended bulb life
• Preset feature turns lights ON at last selected brightness level; eliminates the need to readjust settings each time dimmer is switched ON
• Square green LED display alongside rocker indicates selected brightness level
• Locator LED illuminates when lights are OFF
• Single-pole applications ONLY
• Fits in standard wall boxes and replaces regular switches to provide manual and remote ON/OFF switching, full range dimming and Scene Lighting Control
• Protected memory maintains light levels during minor power fluctuations
• Features Leviton's Intellisense™ Technology (gated automatic gain control) which adjusts receiver sensitivity to help eliminate signal problems due to line noise
• Use existing 60Hz 120V AC house wiring to add multi-location switching without resorting to complicated and costly conventional wiring means
• Double tap to top of rocker switch brings light to full output without affecting preset levels
• Neutral connection required

10Amp / 1200W Scene-Capable Switch

Provides manual and remote ON/OFF switching for larger incandescent, fluorescent and magnetic low-voltage lighting loads such as chandeliers and multiple high-hats. Provides one-button programming through address capturing. Provides Scene Control capability when used with DHC Scene Controller HCCS7-1TW and HCCPG-1TW DHC Toscana Deluxe Programmer. It is also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers. Also provides multi-station manual and remote ON/OFF switching when used with Cat. No. MS00R-10 Multi-Remote Unit. Equipped with Leviton’s Intellisense™ Technology advanced circuitry for the utmost in performance and reliability, even where electrical "noise" exists on the power line. Packed with Ivory and White snap-on Rocker and Frame Kits. Kits for other colors must be purchased separately.

Responds to ON, OFF, ALL LIGHTS ON/ALL OFF and SCENE LIGHTING commands.

Rated: 120V 60Hz, 1000W Incandescent, 1000VA Fluorescent and Magnetic Low-Voltage Lighting ONLY

When using MS00R-10 Multi-Remote Unit in a 3-way or higher applications, blue wire of MS00R-10 must be connected to neutral.

NOTE: A Cat. No. HCA02-10E DHC System Amplifier Module must be installed in every DHC installation to ensure maximum signal strength. In some installations more than one may be required.

Features:

• 2-Way status reporting to status-tracking-capable controllers and programmers registers status changes when manually changed locally (Example: DHC Toscana Deluxe Programmer)
• New one-button programming through address capturing for easier programming
• Provides Scene Control capability when used with DHC Scene Controller HCCS7-1TW or HCCPG-1TW DHC Toscana Deluxe Programmer for varying function and mood lighting schemes in living rooms, dinning rooms and other rooms at the touch of a button. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers
• Fit in standard wall boxes and replace regular switches to provide manual and remote ON/OFF switching and Scene Lighting Control
• Features Leviton's Intellisense™ Technology (gated automatic gain control) which adjusts receiver sensitivity to help eliminate signal problems due to line noise
• Use existing 60Hz 120V AC house wiring to add multi-location switching without resorting to complicated and costly conventional wiring means
• Can be used for single-pole lighting control applications ONLY
• Neutral connection required
• Packed with Ivory and White snap-on rocker/frame kits; optional snap-on rocker/frame color kits sold separately
• Decora styled to coordinate with Leviton's Decora designer line of wiring devices
• Backed by a Limited Two-Year Warranty

15A/1800W Scene-Capable ON/OFF Appliance Plug-in Receiver Module

The Decora Home Controls (DHC) Plug-in Appliance Receiver Module is ideal for any residential setting where ON/OFF switching of appliances, motors up to 1/2 HP, or free-standing lights, including incandescent, magnetic low-voltage, fluorescent and compact fluorescent loads is needed. Typical applications include switching of coffee/espresso makers, toasters and toaster ovens, stereos, TV’s, VCRs, fans and dehumidifiers. The HCP15-1TW Module also allows users to remotely turn ON/OFF free-standing lamps and incorporate them into scene lighting control applications.

Note: Unit is NOT RECOMMENDED for use with hotplates, heaters, and other unattended heating devices.

NOTE: A Cat. No. HCA02-10E DHC System Amplifier Module must be installed in every DHC installation to ensure maximum signal strength. In some installations more than one may be required.

Features:

• Provides 15A-125V NEMA 5-15R grounding receptacle for use with a wide variety of lamps and appliances
• Rated 1800W Incandescent, 1800VA Fluorescent, 15A Resistive and 1/2 HP Motor loads @ 125V AC
• New One-Button Programming through address capturing for easy programming
• Provides manual and remote ON/OFF switching of connected loads
• 2-Way Communication with status-tracking-capable Controllers and Programmers and the DHC Toscana™ Deluxe Programmer when it is switched ON or OFF locally
• Module provides Scene Control ON/OFF switching capability when used with the HCCS7-1TW DHC Seven-Scene Controller and the HCCPG-1TW DHC Toscana Deluxe Programmer
• Protected memory maintains ON/OFF status of connected loads and address programming during minor power fluctuations
• Features Leviton's exclusive Intellisense™ Technology (gated automatic gain control) which adjusts the receiver's sensitivity to help eliminate signal problems due to line noise, making installations more profitable by eliminating
• time-wasting call-backs and increasing customer satisfaction
• LED locator light
• Button for ON/OFF manual control
• Quiet relay switching
• Available in White color ONLY

300W Incandescent Scene-Capable Plug-In Dimming Module

Provides one-button programming through address capturing. Provides manual and remote ON/OFF switching and remote full-range dimming for plug-in incandescent lamps. No wiring necessary; plugs into 15 Amp AC outlet. Allows local control of any lamp plugged into it. Available in White (-W) only. Provides Scene Control capability when used with DHC Scene Controller HCCS7-1TW and HCCPG-1TW DHC Toscana Deluxe Programmer. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers. Equipped with Leviton's Intellisense™ Technology advanced circuitry for the utmost in reliability, even where electrical "noise" exists on the power line. Responds to ON, OFF, DIM, BRIGHT, ALL LIGHTS ON/ALL OFF and SCENE LIGHTING commands.

Rated: 120V 60Hz, 300W Incandescent

NOTE: A Cat. No. HCA02-10E DHC System Amplifier Module must be installed in every DHC installation to ensure maximum signal strength. In some installations more than one may be required.

Features:

• New one-button programming through address capturing for easy programming
• Plug-in Lamp Module adds convenience of remote ON/OFF and DIM/BRIGHT DHC switching capability to plug-in incandescent lamps
• Provide Scene Control capability when used with DHC Scene Controller HCCS7-1TW or HCCPG-1TW DHC Toscana Deluxe Programmer for varying function and mood lighting schemes in living rooms, home theaters and other rooms at the touch of a button. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers
• Soft ON/Fade OFF feature for smooth increasing and lowering of brightness levels; extended bulb life
• Preset feature turns lights ON at last selected brightness level; eliminates the need to readjust settings each time dimmer is switched ON
• Protected memory maintains light levels during minor power fluctuations
• Features Leviton's Intellisense™ Technology (gated automatic gain control) which adjusts receiver sensitivity to help eliminate signal problems due to line noise
• Use existing 60Hz 120V AC house wiring to add multi-location switching without resorting to complicated and costly conventional wiring means
• Modules are backward compatible with 16400/450-S and 16400/450-SD DHC Scene Controllers
• Programmable in 1% increments to customize any number of lighting scenes (Requires use of separate software module)
• Backed by a Limited Two-Year Warranty

600W Scene-Capable Dimming Switch

Provides manual and remote ON/OFF switching and full range dimming for larger incandescent and magnetic low-voltage lighting loads such as chandeliers and multiple high-hats. Provides scene control capability when used with DHC Scene Controller Cat. No. HCCS7-ITW (backward compatible with 16400/16450-S and 16400/16450-SD units). Also provides multi-station manual and remote ON/OFF switching and full range dimming when used with Cat. No. MS00R-1 Multi-Remote Unit. Equipped with Leviton's IntelliSense™ Technology for the utmost in reliability, even where electrical "noise" exists on the power line. Packed with Ivory and White snap-on Rocker and Frame Kits. Kits for other colors must be purchased separately.

Responds to ON, OFF, DIM, BRIGHT, ALL LIGHTS ON/ALL OFF and SCENE LIGHTING commands.

NOTE: A Cat. No. HCA02-10E DHC System Amplifier Module must be installed in every DHC installation to ensure maximum signal strength. In some installations more than one may be required.

Features:

• New one-button programming through address capturing for easy programming
• Provide Scene Control capability when used with DHC Scene Controller HCCS7-1TW or HCCPG-1TW DHC Toscana Deluxe Programmer for varying function and mood lighting schemes in living rooms, home theaters and other rooms at the touch of a button. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers
• Soft ON/Fade OFF feature for smooth increasing and lowering of brightness levels; extended bulb life
• Preset feature turns lights ON at last selected brightness level; eliminates the need to readjust settings each time dimmer switched ON
• Fits in standard wall boxes and replaces regular switches to provide manual and remote ON/OFF switching, full range dimming and Scene Lighting Control
• Protected memory maintains light levels during minor power outages
• Features Leviton's Intellisense™ Technology (gated automatic gain control) which adjusts receiver sensitivity to help eliminate signal problems due to line noise
• Use existing 60Hz 120V AC house wiring to add multi-location switching without resorting to complicated and costly conventional wiring means
• Double tap to top rocker switch brings light to full output without affecting preset levels
• Neutral connection should be used whenever possible but not required for incandescent loads
• Programmable in 1% increments to customize any number of lighting scenes (Requires use of separate software module)

600W Scene-Capable Dimming Switch with LEDs

Provides one-button programming through address capturing. Provides manual and remote ON/OFF switching and full range dimming for larger incandescent and magnetic low-voltage lighting loads such as chandeliers and multiple high-hats. Provides Scene Control capability when used with DHC Scene Controller HCCS7-1TW and HCCPG-1TW DHC Toscana Deluxe Programmer. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers. Provide multi-station manual and remote ON/OFF switching and full range dimming when used with Cat. No. MS00R-10 Multi-Remote Unit. Equipped with Leviton's exclusive Intellisense™ Technology advanced circuitry for the utmost in reliability, even where electrical "noise" exists on the power line. Packed with Ivory and White snap-on Rocker and Frame Kits. Kits for other colors must be purchased separately.

Responds to ON, OFF, DIM, BRIGHT, ALL LIGHTS ON/ALL OFF and SCENE LIGHTING commands.

Rated: 120V 60Hz, 600W Incandescent, 600VA (450W) Magnetic Low-Voltage Lighting

As with every dimmer, derating for multiple gang installations is required.

NOTE: A Cat. No. HCA02-10E DHC System Amplifier Module must be installed in every DHC installation to ensure maximum signal strength. In some installations more than one may be required.

Features:

• New one-button programming through address capturing for easy programming
• Provides Scene Control capability when used with DHC Scene Controller HCCS7-1TW or HCCPG-1TW DHC Toscana Deluxe Programmer for varying function and mood lighting schemes at the touch of a button. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers
• Soft ON/Fade OFF feature for smooth increasing and lowering of brightness levels; extended bulb life
• Preset feature turns lights ON at last selected brightness level; eliminates the need to readjust settings each time dimmer is switched ON
• Square green LED display alongside rocker indicates selected brightness level
• Locator LED illuminates when lights are OFF
• Fits in standard wall boxes and replaces regular switches to provide manual and remote ON/OFF switching, full range dimming and Scene Lighting Control
• Protected memory maintains light levels during minor power fluctuations
• Features Leviton's Intellisense™ Technology (gated automatic gain control which adjusts receiver sensitivity to help eliminate signal problems due to line noise
• Use existing 60Hz 120V AC house wiring to add multi-location switching without resorting to complicated and costly conventional wiring means
• Double tap to top of rocker switch brings light to full output without affecting preset levels
• Neutral connection should be used whenever possible but not required for incandescent loads.
• Programmable in 1% increments to customize any number of lighting scenes

600W Scene-Capable Dimming Switch with LEDs and 2-Way Communication

Provides one-button programming through address capturing. Two-way status reporting to status-tracking-capable controllers and programmers (Example: DHC Toscana Programmer). Single-pole (one location)provides manual and remote ON/OFF switching and full range dimming for larger incandescent and magnetic low-voltage lighting loads such as chandeliers and multiple high-hats. Provides Scene Control capability when used with DHC Scene Controller HCCS7-1TW and HCCPG-1TW DHC Toscana Deluxe Programmer. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers for scene control only (Not 2-way communication). Single-Pole applications ONLY. Unit equipped with Leviton's exclusive Intellisense™ Technology advanced circuitry for the utmost in reliability, even where electrical "noise" exists on the power line. Packed with Ivory and White snap-on Rocker and Frame Kits. Kits for other colors must be purchased separately.

Responds to ON, OFF, DIM, BRIGHT, ALL LIGHTS ON/ALL OFF and SCENE LIGHTING commands.

Rated: 120V 60Hz, 600W Incandescent, 600VA (450W) Magnetic Low-Voltage Lighting

As with every dimmer, derating for multiple gang installation is required.

NOTE: A Cat. No. HCA02-10E DHC System Amplifier Module must be installed in every DHC installation to ensure maximum signal strength. In some installations more than one may be required.

Features:

• 2-Way status reporting to status-tracking-capable controllers and programmers registers status changes when manually changed locally (Example: DHC Toscana Deluxe Programmer)
• New one-button programming through address capturing for easier programming
• Provides Scene Control capability when used with DHC Scene Controller HCCS7-1TW or HCCPG-1TW DHC Toscana Deluxe Programmer for varying function and mood lighting schemes in living rooms, dinning rooms and other rooms. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers
• Soft ON/Fade OFF feature for smooth increasing and lowering of brightness levels; extended bulb life
• Preset feature turns lights ON at last selected brightness level; eliminates the need to readjust settings each time dimmer is switched ON
• Square green LED display alongside rocker indicates selected brightness level
• Locator LED illuminates when lights are OFF
• Single-pole applications ONLY
• Fits in standard wall boxes and replaces regular switches to provide manual and remote ON/OFF switching, full range dimming and Scene Lighting Control
• Protected memory maintains light levels during minor power fluctuations
• Features Leviton's Intellisense™ Technology (gated automatic gain control)which adjusts receiver sensitivity to help eliminate signal problems due to line noise
• Use existing 60Hz 120V AC house wiring to add multi-location switching without resorting to complicated and costly conventional wiring means
• Double tap to top of rocker switch brings light to full output without affecting preset levels
• Neutral connection required

8Amp / 1000W Scene-Capable Switch

Provides manual and remote ON/OFF switching for one-button programming through address capturing. Provides Scene Control capability when used with DHC Scene Controller HCCS7-1TW and HCCPG-1TW DHC Toscana Deluxe Programmer. It is also backward compatible with 16400/16450-Sand 16400/16450-SD DHC Scene Controllers. Single-Pole applications ONLY. Equipped with Leviton's Intellisense™ Technology advanced circuitry for the utmost in performance and reliability, even where electrical "noise" exists on the power line. Packed with Ivory and White snap-on Rocker and Frame Kits. Kits for other colors must be purchased separately.

Responds to ON, OFF, ALL LIGHTS ON/ALL OFF and SCENE LIGHTING commands.

Rated: 120V 60Hz, 1000W Incandescent, 1000VA Fluorescent and Magnetic Low-Voltage Lighting ONLY

As with every dimmer, derating for multiple gang installations is required.

NOTE: A Cat. No. HCA02-10E DHC System Amplifier Module must be installed in every DHC installation to ensure maximum signal strength. In some installations more than one may be required.

Features:

• 2-Way status reporting to status-tracking-capable controllers and programmers registers status changes when manually changed locally (Example: DHC Toscana Deluxe Programmer)
• New one-button programming through address capturing for easier programming
• Provides Scene Control capability when used with DHC Scene Controller HCCS7-1TW or HCCPG-1TW DHC Toscana Deluxe Programmer for varying function and mood lighting schemes in living rooms, dinning rooms and other rooms at the touch of a button. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers
• Fit in standard wall boxes and replace regular switches to provide manual and remote ON/OFF switching and Scene Lighting Control
• Features Leviton's Intellisense™ Technology (gated automatic gain control) which adjusts receiver sensitivity to help eliminate signal problems due to line noise
• Use existing 60Hz 120V AC house wiring to add multi-location switching without resorting to complicated and costly conventional wiring means
• Can be used for single-pole lighting control applications ONLY
• Neutral connection required
• Packed with Ivory and White snap-on rocker/frame kits; optional snap-on rocker/frame color kits sold separately
• Decora styled to coordinate with Leviton's Decora designer line of wiring devices
• Backed by a Limited Two-Year Warranty