AVO-V3PT-F
HDTV Component and IR over Cat 5 Cabling
The AVO-V3PT-F features three gold-plated RCA connectors for distributing
component video (YPbPr) and one spring tension connector for routing control
signals including IR, DC control, logic control. The AVO-V3PT-F does not require
power.
To use, simply connect an AVO-V3PT-F to the source device or devices, connect
a second AVO-V3PT-F to the destination device or devices, and link the two
baluns with standard unshielded twisted pair cabling.
NOTE: Sold Individually
- Maximum Distance*
- 480i/p video: 1,000 feet
- 720p video: 500 feet
- 1080i/p video: 500 feet
- Maximum Input
- 1.1 Vp-p
- Bandwidth
- 60 MHz, 3 dB roll off
- Impedance
- 75 ohms at 1 MHz
- Insertion Loss
- 0.1 dB for 0.1 MHz. Gradually increasing to 2.5 dB over the frequency range
- Return Loss
- Greater than 15 dB over the frequency range
- Common Mode Rejection
- -55 dB at 0.1 MHz. Gradually increasing to -20 dB at 60 MHz
- Unshielded Twisted Pair Cabling Specifications (24 gauge or lower solid copper)
- Maximum capacitance: 20 pf/foot
- Impedance: 100 ohms @ 1 MHz
- Attenuation: 6.6 dB/1000 ft. @ 1 MHz
Cat 5, Cat 5e, Cat 6, Cat 7 compatible
- Pass-through Support
- Two conductor passive pass-through; supports IR, DC control, logic control, and most other control signals requiring two conductors.
- Connectors
- Four (4) gold-plated female RCA and one (1) spring tension to one (1) RJ45
- RJ45 Pinout
- Red (Pr): 7 & 8, pair 4
- Green (Y): 3 & 6, pair 3
- Blue (Pb): 1 & 2, pair 2
- Pass-through: 4 & 5, pair 1
- Temperature
- Operating: 32 to 131 F (0 to 55 C)
- Storage: -4 to 185 F (-20 to 85 C)
- Humidity: up to 95%
- Enclosure
- Black plastic
- Dimensions
- 4.3″ x 2.5″ x 1″
- Weight
- 0.2 lbs (3.2 oz)
- Warranty
- Two years
*Distances and picture quality may be affected by cable grade, cable quality,
source and destination equipment, RF and electrical interference, and cable
patches. Intelix specifications are based on straight-through cabling with
standard-grade Cat 5.
