Intelix Security Solutions using Cat 5 cable from Intelix available from Lashen Electronics

S-V16P

16 Channel Video and Power Rack Balun

The Intelix S-V16P transmits composite video and power over a single twisted pair cable, such as Cat 5 or Cat 6. When used with compatible Intelix baluns, the S-V16P receives video from remote sources, such as cameras, and supplies power to all sixteen remote channels. The power circuit in the S-V16P combines twisted pairs 1, 2, and 4 for power distribution, allowing higher voltage and longer distances.

The S-V16P features a wave filter and anti-static design, mounts in a single 1RU 19" rack space, and conforms to IEC 61000-4-2:1995 standards. The unit is ideal for security and monitoring applications with such equipment as CCTV cameras, monitors, DVRs, video sequencers, video multiplexers, quads, switchers, and servers.

Technical Specifications

Maximum Distance*: Video: 1,000 feet; Power: 800 feet
Input Power: 100-240V AC; 50 - 60 Hz
Output Power Supply: 120W 13V DC
Output Maximum Current: 9.2A
Distortion: Less than 3%
Bandwidth: DC to 6 MHz
Impedance: 75 ohms
Insertion Loss: Less than 2 dB over the frequency range
Return Loss: Greater than 15 dB over the frequency range
Common Mode Rejection: Greater than 40 dB over the frequency range
Video Input Protection: 2KV (common mode); IEC6100-4-5/1955(GB/T) 1726,5-1999
Video Output Protection: 4KV (common mode); 10/700 μs

Interference Rejection: Yes
Compatible Cable: Cat 5, Cat 5e, Cat 6, Cat 7
Compatible Baluns: Video and Power: S-V1P-T; Video: S-V1ST
Input Connectors: 16 RJ45
Output Connectors: 16 female BNC
RJ45 Pinout: Video: 1 & 2; Power: 3 & 6, 4 & 5, 7 & 8
Temperature: Operating: 32° to 131° F (0° to 55° C); Storage: -4° to 185° F (-20° to 85° C); Humidity: up to 95%
Enclosure: Shielded Metal
Dimensions: 17.0" x 6.9" x 1.8"
Compliancy: FCC, CE, RoHS
Ordering Information: S-V16P: one rack-mount balun, one power supply, and two 19" rackmounting ears
Warranty: Two years

*Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches. Intelix specifications are based on straight-through cabling with standard-grade Cat 5.

Intelix S-V16P Example System Drawing

Model Description Sugg
Resale Lashen's
Price

Model	Description	Sugg Resale	Lashen's Price
S-V16P	19" rack-mountable chassis; receives 16 independent camera signals and supplies 12 volt power; twisted pair inputs and BNC outputs; surge protection per channel	$ 549.95	Too Low To Advertise

S-V16P

19" rack-mountable chassis; receives 16 independent camera signals and supplies 12 volt power; twisted pair inputs and BNC outputs; surge protection per channel

$ 549.95

Too Low To Advertise

S-BB4

Four Channel Breakout Box

The Intelix S-BB4 four channel breakout box is a cost effective, versatile tool for composite video distribution over twisted pair cable. The unit consolidates four video signals onto a single twisted pair cable and then distributes them at a remote location. In addition, the S-BB4 also features local tap outputs, providing individual video breakout connections. When used with compatible Intelix baluns, the S-BB4 sends or receives video from remote video equipment, such as cameras, monitors, DVRs, video sequencers, multiplexers, switchers and servers. The S-BB4 features a wave filter and anti-static design, provides transient protection, conforms to IEC 61000-4-2:1995 standards, and supports "up-the-coax" PTZ control signals.

Max Distance: Active video: 1,850 feet; Passive video: 1,000 feet; Control: 1,000 feet
Bandwidth: DC to 8 MHz
Maximum Input: 1.1 Vp-p
Video Signal: 1 Vp-p, 75 ohms
Impedance: 75 ohms
Insertion Loss: Less than 2 dB over the frequency range
Return Loss: Greater than 40 dB over the frequency range
Video Input Protection: 2KV (common mode); 10/700 us; IEC 6100-4-5/1955 (GB/T) 1726,5-1999
Video Output Protection: 2KV (common mode); 10/700 us; IEC 6100-4-5/1955 (GB/T) 1726,5-1999
Cable: Cat 5, Cat 5e, Cat 6, and Cat 7 compatible
MTBF: Greater than 50,000 hours

Compatible Intelix Baluns: S-V1ST; S-V16AR; S-V1P-R; S-V1P-T; S-V1CP
Interference Rejection: Yes
Connectors: (1) RJ45; (4) terminal strip; (4) female BNC
Enclosure: Shielded metal housing
Dimensions: 7.13" x 3.25" x 1.25"
Compliancy: FCC, CE, RoHS
Temperature: Operating: 32° to 131° F; Storage: -4° to 185° F; Humidity: up to 95%
Warranty: 2 years
Included Accessories: Rack mounting hardware

Model	Description	Sugg Resale	Lashen's Price
S-BB4	Four channel composite video breakout box with RJ45, screw terminal and BNC connectors	$ 149.95	Too Low To Advertise

S-BB4 Example System 1: Two S-BB4 breakout boxes sending four channels of composite video over a single twisted pair cable.
Intelix S-BB4 Example System 1

S-BB4 Example System 2: Two S-BB4 breakout boxes sending four channels of composite video over a single twisted pair cable. Four additional twisted pair runs distribute video to four Intelix S-V1ST baluns.
Intelix S-BB4 Example System 2

S-BB4 Example System 3: Two S-BB4 breakout boxes sending four channels of composite video over a single twisted pair cable. Two cameras are connected directly to the S-BB4. Two additional twisted pair runs distribute video to two Intelix S-V1ST baluns.
Intelix S-BB4 Example System 3

S-BB4 Example System 4: Video from a remote CCTV camera is transmitted to an S-BB4 and a local monitor. The same video channel is then distributed to a remote Intelix S-V1AR and second monitor.
Intelix S-BB4 Example System 4

S-BB4 Example System 5: Video from four remote CCTV cameras is transmitted to an S-BB4 and a DVR.
Intelix S-BB4 Example System 5

S-BB4 Example System 6: Four video channels from an Intelix S-V16AR are distributed to an Intelix S-BB4 via a single twisted pair cable.
Intelix S-BB4 Example System 6

S-V1P-T

Video and Power Transmit Balun

When used with a compatible Intelix balun, the S-V1P-T transmits composite video and power over a single twisted pair cable, such as Cat 5 or Cat 6. The S-V1P-T combines twisted pairs 1, 2, and 4 for power distribution, allowing higher voltage supplies and longer distances. S-V1P-T baluns replace bulky coaxial video cable and utilize a building's existing structured cabling network.

The S-V1P-T features a wave filter and anti-static design and conforms to IEC 61000-4-2:1995 standards. S-V1P-T baluns are ideal for security and monitoring applications with such equipment as CCTV cameras, monitors, DVRs, video sequencers, video multiplexers, quads, switchers, and servers.

Maximum Distance*: Video: 1,000 feet; Power: 650 feet
Maximum Input: 1.1 Vp-p
Video Signal: 1 Vp-p, 75 Ohms
Bandwidth: DC to 6 MHz
Impedance: 75 ohms
Insertion Loss: Less than 2 dB over the frequency range
Return Loss: Greater than 15 dB over the frequency range
Common Mode Rejection: Greater than 40 dB over the frequency range
Protection: 2KV
Compatible Cable: Cat 5, Cat 5e, Cat 6, Cat 7
Distortion: less than 3%
Power Maximum Current: 1.5A
Maximum Supported Wattage: 18 watts
Maximum Supported Voltage: 48 volts at 15.4 watts
Input Power Supply: 12 - 24 VAC / 12 - 40 VDC
Resistance: 75 ohm
RJ45 Pinout: Video: 1 & 2; Power: 3 & 6, 4 & 5, 7 & 8

*Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches. Intelix specifications are based on straight-through cabling with standard-grade Cat 5.

Interference Rejection: Yes
Connectors: Video: One (1) male BNC; Power: One (1) male mini-DIN; Twisted Pair: One (1) RJ45
Compatible Intelix Baluns: S-V16P; S-V1P-R
Temperature: Operating: 32° to 131° F (0° to 55° C); Storage: -4° to 185° F (-20° to 85° C); Humidity: up to 95%
Enclosure: ABS plastic
Dimensions: 2.50" x .075" x 1.38" with 5" leads
Compliancy: FCC, CE, RoHS
Ordering Information: S-V1P-R: one receive balun in bulk packaging; S-V1P-T: one transmit balun in bulk packaging
Warranty: Two years

Intelix S-V1P-T Wiring

Model Description Sugg
Resale Lashen's
Price

Model	Description	Sugg Resale	Lashen's Price
S-V1P-PAC	Composite video and power extender set with surge protection in retail packaging	$ 59.95	Too Low To Advertise
S-V1P-R	Composite video and power extender with surge protection; male DIN power connector	$ 29.95	Too Low To Advertise
S-V1P-T	Composite video and power extender with surge protection; female DIN power connector	$ 29.95	Too Low To Advertise

S-V1P-PAC

Composite video and power extender set with surge protection in retail packaging

$ 59.95

Too Low To Advertise

S-V1P-R

Composite video and power extender with surge protection; male DIN power connector

$ 29.95

Too Low To Advertise

S-V1P-T

Composite video and power extender with surge protection; female DIN power connector

$ 29.95

Too Low To Advertise

S-V1ST

Composite Video Balun

The Intelix S-V1ST transmits composite video over a single twisted pair cable, such as Cat 5 or Cat 6. The S-V1ST features a male BNC connector for direct connection to source and destination devices, as well as screw terminal connectors for quick twisted pair connection. Used in pairs, S-V1ST baluns replace bulky coaxial video cable and utilize a building's existing structured cabling network.

The S-V1ST conforms to IEC 61000-4-2:1995 protection standards and features exceptional interference rejection. S-V1ST baluns are ideal for security and monitoring applications with such equipment as CCTV cameras, monitors, DVRs, video sequencers, video multiplexers, quads, switchers, and servers.

Maximum Distance*: active system: 1,850 feet; passive system: 1,000 feet
Maximum Input: 1.1 Vp-p
Video Signal: 1 Vp-p, 75 Ohms
Bandwidth: DC to 5 MHz
Interference Rejection: Greater than 60 dB
Attenuation: 1.5 dB max
Impedance: 75 ohms
Insertion Loss: Less than 2 dB over the frequency range
Return Loss: Greater than 15 dB over the frequency range
Common Mode Rejection: Greater than 40 dB over the frequency range
Protection: 2KV, 10/700 μs; (IEC6100-4-5 (GB/T1726,5-1999)
Compatible Cable: Cat 5, Cat 5e, Cat 6, Cat 7

Interference Rejection: Yes
Resistance: 75 ohm
Connectors: Video: one (1) male BNC; Twisted Pair: two (2) screw terminals
Temperature: Operating: 32° to 131° F (0° to 55° C); Storage: -4° to 185° F (-20° to 85° C); Humidity: up to 95%
Compatible Intelix Products: S-BB4; S-V16P; S-V16AR
Enclosure: ABS plastic
Dimensions: 1.5" x 0.9" x 0.9"
Compliancy: FCC, CE, RoHS
Ordering Information: S-V1ST: one balun in bulk packaging
Warranty: Two years

*Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches. Intelix specifications are based on straight-through cabling with standard-grade Cat 5.

Intelix S-V1ST In Use
Intelix S-V1ST Wiring