Toll Free - U.S.A. Only:
1-800-552-7436
Phone: 973-627-3783
FAX: 973-625-9501
e-mail: sales@lashen.com
HOMEVENDORSPRODUCTSHOW TO ORDERABOUT USSTORE LOCATIONNEW PRODUCTSNAVIGATION

Products

Vendors

Audio/Video Products

Security Products

Tools & Test Equipment

Power Products

Racks & Mounts

Satellite & Antennas

More Vendors

Featured Products

DigiCat Series of baluns

The Intelix DigiCat Series of baluns is the ideal solution for sending digital, high-performance signals over structured cabling.

AVO-USB - USB over Cat 5 Balun

AVO-USB

USB over Cat 5 Balun

The Intelix AVO-USB extender set transmits low and full speed USB signals over twisted pair cabling. The set extends low speed USB 1.0 and 2.0 signals up to 330 feet, and full speed USB 1.0 and 2.0 signals up to 100 feet. Convenient connector dongles allow direct connection to the host and client devices, facilitating a clean, low-profile installation.

The Intelix AVO-USB is plug-and-play and does not require driver software.

The AVO-USB is ideal for education, government, house of worship, corporate, residential, and any other application requiring extended USB signal distribution.

Buy Online

Maximum Distance* Full speed (12 mbps) 100 feet
Low speed (1.5 Mbps) 330 feet
Anti-Static Protection Contact Discharge: 2000V
Air Discharge: 4000V
IEC61000-4-2 1995
Power Powered through the USB output of the host device
Vbus Power 5V
Low Power Device Extension
(memory sticks, etc.)
<100 mA draw: 200 feet
High Power Device Extension
(unpowered hubs, etc.)
<500 mA draw: 30 feet
Self Powered Device Extension
(powered hubs, etc.)
0 mA draw: 330 feet
Connectors Host: USB-A male to RJ45
Client: USB-A female to RJ45
Diagnostic Green power/status LED
Recommended Cable Cat 5, Cat 5e, Cat 6, Cat 6A
Operating Temperature Range -41 to 95 degrees F
-5 to 35 degrees C
Operating Humidity Range 5 to 90% non-condensing
Dimensions 2.5" x 0.75" x 1.38"
Enclosure ABS plastic
Regulatory CE, RoHS
Shipping Weight 1 lbs.
Warranty 2 years

*Speed dependent
**Distances may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches. Intelix specifications are based on straight-through cabling with standard-grade Cat 5.

Intelix AVO-USB Example System Drawing
System Drawing: A mouse is connected to a remote PC and monitor over 330 feet of Cat 5 cable.

DIGI-VGA-F Audio & VGA over Cat 5 Balun DIGI-VGA-F Audio & VGA over Cat 5 Balun

DIGI-VGA-F

Audio & VGA over Cat 5 Balun

The Intelix DIGI-VGA-F balun set transmits high-definition VGA video and high fidelity analog audio extended distances over inexpensive structured pair cabling, such as Cat 5 or Cat 6. The DIGI-VGA-F balun set includes a DIGI-VGA-S-F send balun, a DIGI-VGA-R-F receive balun, two power supplies, and a USB power cable. The kit is powered on both the send and receive end with either 12 VDC power supplies or optional USB power on the send end. The send balun provides local audio/video outputs for added versatility, whereas the receive balun features dual amplified audio/video outputs for linking. In addition, the DIGI-VGA-R-F receive balun provides brightness, contrast, and overall picture quality adjustment for skew free performance over standard Cat 5 cabling.

Buy Online

Maximum Distance* 1920 x 1200 resolution 250 feet
1600 x 1200 resolution 350 feet
1280 x 1024 resolution 500 feet
1024 x 768 resolution 700 feet
800 x 600 resolution 850 feet
Video Bandwidth DIGI-VGA-R-F (250 feet): 120 MHz
DIGI-VGA-R-F (850 feet): 50 MHz
DIGI-VGA-S-F: 350 MHz
Input Video Signal 1.2V p-p
Audio Frequency Response 20 Hz to 20 kHz
Audio Impedance 600 ohm
Audio Nominal Level 0 - 1.0V
Common Mode Rejection 60 dB
Unshielded Twisted Pair Cabling Specifications (24 gauge or lower solid copper) Maximum capacitance: 20 pf/foot
Impedance: 100 ohms @ 1 MHz
Attenuation: 6.6 dB/1000 ft. @ 1 MHz
Cat 5, Cat 5e, Cat 6, Cat 7 compatible
Send Unit Connectors One male HD15 input, one female HD15 output, one 1/8" mini audio input, one 1/8" mini audio output, one shielded RJ45 output, one USB type-B power connector, one DIN mini power connector
Receive Unit Connectors Two female HD15 outputs, two 1/8" mini audio outputs, one shielded RJ45 input, one DIN mini power connector
Power Consumption DIGI-VGA-R-F: 12V/0.5A or 6W
DIGI-VGA-S-F: 12V/0.2A or 2.4W
Enclosure Metal
Max Units for Linking 3
Max Distance between Links Distance based on resolution
Brightness Front panel trim-pot on the DIGI-VGA-R-F receive unit
Contrast (skew adj.) Front panel trim-pot on the DIGI-VGA-R-F receive unit
Temperature Operating: 32 to 131 F (0 to 55 C)
Storage: -4 to 185 F (-20 to 85 C)
Humidity: up to 95%
Status Front panel video, audio, and power EDs on both the DIGI-VGA-R-F receive and DIGI-VGA-S-F send units
Dimensions DIGI-VGA-R-F: 6.25" x 1.25" x 3.25"
DIGI-VGA-S-F: 6.25" x 1.25" x 3.25"
Shipping Weight DIGI-VGA-F: 4.0 lbs
DIGI-VGA-R-F: 2.0 lbs
DIGI-VGA-S-F: 2.0 lbs
Ordering Information DIGI-VGA-F: includes one DIGI-VGA-S-F send balun, one DIGI-VGA-R-F receive balun, two DC power supplies, and one USB power cable
DIGI-VGA-R-F: includes one DIGI-VGA-R-F receive balun and one DC power supply
DIGI-VGA-S-F: includes one DIGI-VGA-S-F send balun, one DC power supply, and one USB power cable
Warranty Two years

*Distances, picture and audio quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches. Intelix specifications are based on straight-through cabling with standard-grade Cat 5.