HellermannTyton's surface raceway (TSR) is a one piece, non-metallic, adhesive backed latching raceway designed to aesthetically organize and route low voltage communications cables. It features a low profile design which blends into any environment whether it is new construction or a renovation. It is easy to cut and trim and is also paintable with a latex based paint. The raceway is equipped with a large base for greater adhesive surface. The adhesive is a rubber based foam tape with high ultimate bond-strength, which conforms to any surface. Featuring a special flexible hinge, the raceway can endure numerous opening and closings without creating discoloration or stress cracking. The covers self-locking, hidden positive latch permits quick re-entry as well as providing a secure installation of premise wire. Constructed from 94V-0 PVC.
HellermannTyton's low voltage raceway (TSR) is a one piece, non-metallic, adhesive backed, latching raceway designed to aesthetically organize and route communications wires, including high speed UTP cable and fiber optic cable, from the telecom room to the work area.
The HellermannTyton TSR1W-14 Splice Cover allows you to couple sections of the TSR1W-6A for longer runs.
The HellermannTyton TSR1W-21-1 Tee Cover allows you to tee off the TSR1W-6A while maintaining a minimum 1” bend radius.
The HellermannTyton TSR1W-25-1 Elbow Cover allows right angle bends while maintaining a minimum 1” bend radius.
The HellermannTyton TSR1W-29-1 External Corner Cover allows the TSR1W-6A to go around an outside corner while maintaining a minimum 1” bend radius.
The HellermannTyton TSR1W-33-1 Internal Corner Cover allows the TSR1W-6A to go around an inside corner while maintaining a minimum 1” bend radius.
The HellermannTyton TSR1W-50 Ceiling Drop allows the TSR1W-6A to go around the outside rail of a drop ceiling with no cutting of the rail.
The HellermannTyton TSRW-JB2 white single gang junction box is 2” deep to allow enough room for network and coax cable bends.