Model FLUKE-115

Designed by electricians. Engineered by Fluke.

NOTE: Available Only In U.S.A

Compact true-rms meter for field service technicians. The Fluke 115 is the solution for a wide variety of electrical and electronic testing applications.

Features at a glance

• Large white LED backlight to work in poorly lit areas
• Resistance and continuity
• Min/Max/Average to record signal fluctuations
• CAT III 600 V safety rated
• 3-year warranty

Model FLUKE-117

Electrician's Multimeter with Non-Contact voltage

NOTE: Available Only In U.S.A

Designed by electricians. Engineered by Fluke.

Compact true-rms meter for commercial applications. The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help get the job done faster.

Features at a glance

• VoltAlert™ technology for non-contact voltage detection
• AutoVolt automatic ac/dc voltage selection
• Low input impedance: helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• True-rms for accurate measurements on non-linear loads
• Measures 10 A (20 A overload for 30-seconds)
• Resistance, continuity, frequency and capacitance
• Min/Max/Average with elapsed time to record signal fluctuations
• Compact ergonomic design for one-handed operation
• Compatible with optional magnetic hanger (ToolPak™) for hands free operation
• CAT III 600 V safety rated

Model FLUKE-179 ESFP

Brains and Brawn

NOTE: Available Only In U.S.A

Want a smarter meter or a tougher one? Buy one of these and you get both. With features like lifetime warranty. 6000 count resolution. 0.09% accuracy 177,179. Min/Max/Average. True-rms, ac voltage and current. They're all CAT IV rated and sport an easy access door. The 177 and 179 have a backlight. The 179 measures temperature. All told, this is one powerhouse line of digital multimeters. They're all super-simple to use and built tougher than a world champion wrestler.

• Lifetime Warranty
• Online Warranty Registration
• IEC 1010 CAT IV 600V, CAT III 1000V safety rating
• 6000 count display provides improved resolution
• True-rms ac voltage and current for accurate readings on all waveforms
• Min/Max/Average recording
• Frequency, capacitance & resistance capabilities
• 177 & 179 have a backlight to illuminate the screen in dark workspaces
• Easy access battery door to change the battery without breaking the calibration seal
• Drop protected to 1 meter
• Over-molded case features integrated probe holders
• Compatible with ToolPak™ meter hanging kit
• The 179 measures temperature in °C and °F

Model FLUKE-87-5

NOTE: Available Only In U.S.A

Introducing the new and improved Fluke 80 Series V digital multimeters

The new Fluke 87-5 has improved measurement functions, trouble-shooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution and electro-mechanical equipment.

The 80 Series 5 operates very similar to the classic 80 series, but with more problem solving power, safety, convenience and impact protection.

The new 80 series 5 are independently tested to comply with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V/CAT III 1000V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes.

• Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
• Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
• Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
• Large digit display with bright, two-level backlight makes the 80- Series V significantly easier to read than older models

• True-rms ac voltage and current for accurate measurements on non linear signals
• Selectable filter for accurate voltage and frequency measurements on motor drives
• 0.05 % dc accuracy
• 6000 counts, 3-3/4 digits
• 4-1/2 digit mode for precise measurements (20,000 counts)
• Measure up to 1000 V ac and dc
• Measure up to 10 A, 20 A for up to 30 seconds
• Built in thermometer lets you carry one less tool (TC probe included)
• Frequency to 200 kHz and % duty cycle
• Resistance, continuity and diode test
• 10,000 µF capacitance range for components and motor caps
• Min/Max-Average recording with Min/Max Alert to capture variations automatically
• Peak capture to record transients as fast as 250 µs
• Relative mode to remove test lead interference from low ohms measurements
• Auto and manual ranging for maximum flexibility
• Touch Hold to capture stable readings avoiding noisy signals
• Large display digits and two-level bright white backlight for increased visibility
• Analog bargraph for fast changing or unstable signals
• Input Alert provides audible warning against wrong use of input jacks
• Improved selectable sleep mode for long battery life
• Access door for fast battery changes without breaking the calibration seal
• "Classic" design with new removable holster with built in test lead and probe storage
• Lifetime warranty

Model FLUKE-789

ProcessMeter™

NOTE: Available Only In U.S.A

Double your power.
Fluke combined a loop calibrator and a DMM to give process technicians double the power in one tool (the Fluke 787). Now we made it even better "the ultimate loop calibration multimeter" the Fluke 789 ProcessMeter. The 789 has a display that's not only twice as large, but also twice as bright with two levels of backlighting. With its built-in, selectable 250 ohm HART® resistor, it eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less.

• 24 V Loop power supply
• HART mode setting with loop power (adds 250 ohm resistor)
• 100 % larger dual display
• 1,200 ohm drive capability on mA source
• Enhanced backlight with two brightness settings
• 0-100 % mA Span Check buttons to toggle between 4 and 20 mA
• Infrared I/O serial port compatible with FlukeView? Forms Software Version 2.1 (available Feb. 2003)
• Externally accessible fuses for easy replacement
• DMM designed to meet 1000 volt IEC 1010 CAT III standards
• Precision 1000 V, 440 mA true-rms digital multimeter
• Frequency measurement to 20 kHz
• Min/Max/Average/Hold/Relative modes
• Diode Test and Continuity Beeper
• Simultaneous mA and % of scale readout
• 20 mA dc current source / loop calibrator / simulator
• Manual Step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp
• Externally accessible battery for easy battery changes
• IR communication port allows data to be logged to optional FlukeView Forms® software for graphical analysis and reporting