Fluke Meter Accessories

Meter Hanging Kit

NOTE: Available Only In U.S.A

Hang your meter anywhere.

TPAK™ is designed to work with:

• 180 Series Digital Multimeters
• 80 Series IV Digital Multimeters
• 70 Series III Digital Multimeters
• 50 Series II Digital Thermometers
• 725 Multifunction Calibrator

Now you can hang your meter almost anywhere with the new Fluke TPAK accessories kit. TPAK includes a universal hanger, a magnet, and 9-inch (43 cm) and 17-inch (23 cm) "hook-and-loop" hanger straps.

The universal hanger is designed to fit into the special module on the back of the meter. The universal hanger allows you to hang your meter on a nail, hook or other object. You can add a piece of rope, flexible wire or cable to hang the meter in almost any position.

The 9-inch (43 cm) and 17-inch (23 cm) hook-and-loop straps are used with Fluke's universal hanger to wrap around and connect to a pipe, beam or any other convenient support structure.

And finally, the special magnet accessory is designed to connect to either of the straps. The strong magnet accessory will attach to an electrical panel, a metal door jamb or any other ferrous-type metal.

With the universal hanger, two hook-and-loop straps and the magnet, TPAK solves almost any hanging and positioning problem you may face with your meter. Call your local Fluke distributor and ask for the TPAK accessory kit.

Model AC72

Insulated 1000V Alligator Clip

NOTE: Available Only In U.S.A

• Intended for use with (dual) 1000V CAT III and 600V CAT IV rated Fluke meters
• Slide-on style insulated alligator clips accept standard probe tips diameters from .076" to .084"
• Ideal for use with Fluke TL71 and TL75 test probes
• Nickel-plated steel jaws open to 5/16"
• Conforms to safety standard IEC 1010-2-031, 1000V CAT III and 600V CAT IV
• Current Rating: 10A

• Country of Origin: U.S.A.
• Insulation Material: Santoprene
• Clip Material: Nickel-plated steel with gold-plated Beryllium copper spring contacts
• Packaging: Blister with printed chip board slip card w/hang hole
• Warranty: One year

Model C125

Soft Carrying Case

NOTE: Available Only In U.S.A

Zippered carrying case (black) designed to carry ScopeMeter 120 Series. Additional pouch is designed to carry test leads and probes. Convenient belt loop accommodates tool belt.

• Dimensions: 10.5" x 6.0" x 2.5"

Model H5

Custom Holster for T5-600 and T5-1000

NOTE: Available Only In U.S.A

• Rugged fabric holster includes flap for lead storage and built-in belt loop
• Fits Fluke T3 and T5 testers
• One year warranty

Model TL220

Industrial Test Lead Set

NOTE: Available Only In U.S.A

• Starter kit for Industrial applications
• Includes one pair (red and black):
  AC220
  TP220
  TL222
• 1000 V CAT III, 600 V CAT IV, 10A

Model TL224

SureGrip™ Silicone Test Leads (straight to right)

NOTE: Available Only In U.S.A

• 1000 V CAT III, 600 V CAT IV, 10A
• 1.5 meter (4.9') silicone-insulated wire resists heat & cold
• Superior strain relief

Model TL75

Hardpoint Test Lead Set

NOTE: Available Only In U.S.A

• Extremely hard alloy tips resist wear
• One pair (red, black) comfort grip probes with PVC insulated, test leads with right-angle shrouded banana plugs
• Recommended for general purpose measurements
• CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
• One year warranty

Model TP220

SureGrip™ Industrial Test Probes

NOTE: Available Only In U.S.A

• Sharp, 1/2" (12mm) stainless steel tip provides reliable contact
• Flexible finger barrier improves grip
• 1000 V CAT III, 600 V CAT IV, 10A
• Recommended for use with TL224 test leads