Professional Contractor Series PA Amplifiers

PMM120A

120W PA Mixer Power Amplifier with 6 Inputs

UL LISTED, 120 Watt RMS; AC 120V, 50/60Hz; 50-15kHz; 6 MIC Inputs, 4 XLR Connectors (1.0mv/250 Ohms); 1 Aux Input (200mV 47K), 1 Telephone (0.1-1V 600 ohm); 4/8/16 ohms & 75/25 V Line Inputs, Music on Hold Features, Separate Bass and Treble Controls.

PMM60A

60W PA Mixer Power Amplifier with 6 Inputs

UL LISTED, 60 Watt RMS; AC 120V, 50/60Hz; 50-15kHz; 6 MIC Inputs, 4 XLR Connectors (1.0mv/250 Ohms); 1 Aux Input (200mV 47K), 1 Telephone (0.1-1V 600 ohm); 4/8/16 ohms & 75/25 V Line Inputs, Music on Hold Features, Separate Bass and Treble Controls

PL260A

260 Watt Amplifier

- 260 Watts RMS - Seven 70 or 25 Volt zone outputs with 70/25 switch selector - 24 Volt input for emergency Back Up power! - 5 XLR MIC connector inputs w/individual Phantom Power switches - 3 Auxiliary inputs - Pre-amp input/booster output - Additional auxiliary output - 4/8/16 Ohm output zone - Music on hold feature - 1 Telephone paging input (0.1-1V 600 ohm) - AC 117V 60Hz - Seven zone on/off selectors on face plate - Separate bass and treble controls - Dimensions: 3.5"H x 16.9" x 11.6" - CSA & UL approved

PBM30

30W Contractor Series PA Amplifier UL Listed

Speco's two channel contractor series mixer/amplifier is a 30 watt amplifier. It features an auto mute function, music on hold output with separate level control (600 ohm line and one watt 8 ohm), 600 ohm telephone line input with level control, bass/treble tone controls, front panel level controls, bass and treble tone controls, front panel level controls, and manual muting contacts. In addition to the telephone line input, this unit accepts inputs from two sound sources. Each source utilizes a microphone input (terminal strip). Source 1 also offers the option of an auto summing stereo auxiliary RCA input. Outputs include a choice of 4, 8, and 16 ohm as well as 70 and 25 volt line outputs. Rack (PBM-RK1) and wall (PBM-WK1) mounting kits are available (not included). UL Listed.