Multi-room Audio Distribution

5.25" Round In-Ceiling Speakers

Features:

• 5.25" in-ceiling loudspeaker
• Mica-Filled polypropylene woofer with butyl rubber surround
• Power Handling: 50 Watts
• Impedance: 8 ohms
• Frequency Range: 55Hz - 20kHz +-3dB

6.5" Dual Voice Coil In-Ceiling Speaker

Soprano Series

• 6.5" Dual Voice Coil woofer polypropylene cone with rubber surround (no foam)
• Dual 1/2" fluid-cooled ultra-wide dispersion mylar tweeters (swivel independently up to 45°)
• Dual 2nd order Butterworth crossover networks
• Thermal-sensing polymer switches to prevent blown tweeter; 8-ohm impedance
• Power handling: 65Watts RMS (92Watts peak)
• Frequency response: 55Hz-20KHz ± 3dB
• Sensitivity: 89dB (for 2.83 pink noise)
• Dual 14 AWG spring-loaded push terminals
• Small perforated designer grille
• Mounting template and paint shield included
• Use with IC65B Pre-construction bracket (hole size: 7.5" D) - sold separately
• Dimensions: 9.25" OD x 3.5" H

Instructions

8" Dual Voice Coil In-Ceiling Speaker

Soprano Series

• 8" Dual Voice Coil woofer polypropylene cone with true rubber surround (no foam)
• Dual 1/2" fluid-cooled ultra-wide dispersion mylar tweeters (swivel independently up to 45°)
• Thermal-sensing polymer switches to prevent blown tweeter
• 18dB/octave crossover network
• Power handling: 75Watts RMS (106Watts peak)
• Frequency response: 55Hz-20KHz ± 3dB
• Sensitivity: 90dB, 8-ohm impedance
• Dual 14 AWG spring-loaded push terminals
• Small perforated designer grille
• Mounting template and paint shield included
• Use with IC80B Pre-construction bracket (hole size: 9.5" D) - sold separately
• Dimensions: 10.75" OD x 4" H; retail packaging

Instructions

6.5" In-Wall Speakers

Soprano Series

• 6.5" Mica filled polypropylene woofer with Butyl rubber surround
• 18 oz. magnet
• 2nd Order Linkwitz-Riley crossover, 12dB per octave with thermal-sensing polyswitches to prevent blown tweeter
• Pivoting tweeter: 1" voice coil, enclosed, rare earth neodymium magnet, silk soft dome
• Frequency response: 45Hz-20KHz ± 3dB
• Recommended power: 20W - 150W
• Sensitivity: 90dB(1W/1M)
• 8-ohm nominal impedance
• 14 AWG gold plated terminal posts
• Small perforated designer grille
• Mounting template, IR positionable template, and paint shield included
• Use with IW65B Pre-construction bracket (hole size: 10.5" L x 7.25" W) - sold separately
• Dimensions: 10.0625" L x 8.75" W x 3.5" H

8" In-Wall Speakers

Soprano Series

• 8" Mica filled polypropylene woofer with Butyl rubber surround
• 20oz. magnet
• 2nd Order crossover, 12dB per octave with thermal-sensing polyswitches to prevent blown tweeter
• Pivoting tweeter: 1" teterone dome, neodymium magnet
• Frequency response: 35Hz-20KHz ± 3dB
• Power handling: 175W
• Sensitivity: 90dB(1W/1M)
• 8-ohm nominal impedance
• 14 AWG gold plated terminal posts
• Small perforated designer grille
• Mounting template, IR positionable template, and paint shield included
• Use with IW80B Pre-construction bracket (hole size: 12.75" L x 8.625" W) - sold separately
• Dimensions: 14" L x 10" W x 3.5" H
• Retail packaging

6.5" Left-Center-Right Speaker

Features:

• 6.5" Left-Center-Right Speaker
• Can be used as the center or left/right channels
• Woofer: Dual 6.5" Mica filled polypropylene with Butyl rubber surround, 20 oz. magnet and 1.25" voice coil
• Tweeter: 1" silk soft dome
• Sensitivity: 90dB (1W/1M)
• Power Handling: 20 to 150 Watts
• Impedance: 8 ohms
• Frequency range: 40Hz - 20kHz ± 3dB

Instructions

6.5" Outdoor Speakers

The OS610 outdoor speakers offer exceptional sounds for both outdoor and indoor applications. Its soft lines and curved corner design allows these speakers to fit into both traditional and contemporary decors. The OS610 features UV protected white ABS plastic with aluminum grills and brackets, stainless steel hardware, a 6.5-inch polygraphite woofer with long lasting rubber surround, and a 1-inch fluid cooled soft dome tweeter. The speakers are designed to be mounted either horizontally or vertically with the included bracket and have a wide range of swivel positions with 1 degree locking points. Alternatively, the OS610 can also be mounted using two M6 mounting holes embedded in the enclosure. With a power handling of 150 watts and sensitivity of 87dB, the OS610 delivers high SPL levels both indoor and out. For local volume control, use the VC300 impedance matching volume control.

Instructions

• 6.5" injected polypropylene woofer with butyl rubber surround.
• 1" fluid-cooled silk tweeter with 12oz magnet structure
• Frequency response: 55Hz-20kHz +/-3dB
• Recommended amplifier power: 10W to 150W
• Ultraviolet fade protection
• All stainless steel hardware
• Aluminum grilles (2)
• Aluminum brackets (2)

• Frequency response 55Hz to 20Khz +/- 3dB
• Power handling 10W to 150W
• Sensitivity 87dB at 1 meter w/ 1 watt
• Impedance 8 ohms
• Gold plated terminal post Accepts up to 14AWG wire
• Drivers
  • Woofer (1) 6.5 inch polygraphite
  • Tweeter (1) 1 inch fabric soft dome
• Crossover 2nd order Linkwitz-Reily 12dB octave
• Dimensions 8.5w x 13.5 x 8.75d inches
  (21.59cm x 34.29cm x 34.29cm)
• 7.5 Lbs. with bracket