CAT5 Camera System

CAT5 Camera Sequencer

Channel Vision's P-6014 is a 4-input, 2-output CAT5 Camera Sequencer and Switcher for Channel Vision's 6210 Color CAT5 Cameras (sold separately) and 3112 CAT5 Camera Breakout for standard cameras (sold separately). Easily view all system cameras through the auto-sequencer or via push-button on the optional remote control. Separate video homing module available for automatic video switching when triggered by an external system such as Channel Vision's telephone entry, CAT5 intercom, or any 3rd party dry contact closure.

The RS-232 interface and AV loop out connections make it easy to integrate the P-6014 into any security system - from the most basic to the most advanced touch screen-driven systems on the market.

Features:

• Creates an easy interface for CAT5 cameras
• Switches both audio and video
• Monitor output sequences through the camera views automatically
• IR and Serial Control options
• Mounts in a structured wire enclosure
• Cost effective and easy to install

CAT5 Audio/Video Interface

Channel Vision's 3112 CAT5 Audio Video Interface allows audio, video, power and IR signals to be connected through a single CAT5 cable. This flexible device can be used to convert traditional cameras into CAT5-compatible cameras or to extract audio and video from the Monitor-2 output of the Channel Vision P-6014 CAT5 Camera Sequencer. The 3112 can also be utilized to provide a simplified connection between CAT5 cable and an IR receiver or emitter.

Features:

• Converts any standard camera to CAT5 cable
• Adapts IR receivers to CAT5 cable
• Works with the P-6014 CAT5 Camera Sequencer
• Cost-effective and easy-to-install

Compatible Products:

• P-6014 CAT5 Camera Sequencer
• 6210 Color CAT5 Camera
• IR-2400 Remote Head IR Receiver
• IR-2005 J-Box IR Receiver
• IR-3001 Single IR Emitter
• IR-3002 Dual IR Emitter
• Or any standard security camera

Color CAT5 Camera

Channel Vision's 6210 Color CAT5 Camera with audio is designed to mount into a single-gang J-Box or low voltage ring. Easily connect the 6210 directly to the Channel Vision P-6014 CAT5 Camera Sequencer via its CAT5 output or a standard video system through its BNC output. When used with the P-6014, its loop out connections enable the camera signals to be connected to another device such as a DVR or modulator.

Features:

• BNC & CAT5 output
• Built-in microphone
• Screwless trim plate
• Mounts in a 1-gang box
• Easy-to-install