100 watt Wall-Mount Power Vector Modular Amplifier
Bogen's Wall-Mount Power Vector modular amplifiers offer a wide range
of power from which to choose from, with three models ranging from 100W to
250W. The amplifiers are designed to work with both high- (70/25V) and
low- (4/8-ohm) impedance speaker systems. Each model includes eight module
bays for plug-in input modules and allows for up to four levels of
priority between modules. Two module bays are capable of accepting signal
processing plug-in output modules. Each module is controlled by an
independent volume control with an associated signal/clip LED for signal
status. An 11-segment LED output meter monitors output signal level. Each
model includes a motorized master volume control that can be controlled
using a remote volume control panel (RVCP, sold separately).
- 100-,150-, and 250-watt models, each with a large power reserve
- Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads
- 8 module bays
- Wide selection of advanced plug-in modules
- 2 module bays capable of handling signal processing plug-in output modules
- 4 levels of priority between modules
- 11-segment LED output level meter monitors the output level of the power amplifier with Peak and Average meter switch
- Adjustable output level limiter with limit indicator
- Tape output available on front of unit
- Optional front-mounted input combo jack with 1/4" stereo phone and female XLR capabilities
- Motorized master volume control can be remotely operated
- Bass and treble controls with center detent
- Two-color LED for each channel indicates input active/clipping
- Switch permits user to select either transformer coupled outputs or a direct low-impedance output
- Bass and treble control bypass switch (located in module bay 6)
- 125 Hz Lo-cut feature (switch located in module bay 6)
- 5-position barrier strip, with clamping washers, provides connections for speaker loads
- Master mute function overrides all audio from the mixer section of the amplifier
- Screw terminal for master mute and remote volume control functions
- Each of the 8 module bays has an associated independent volume control
- Remote volume control panel (RVCP) (sold separately)
- Requires flush-mount (Model BBF) or surface mount (Model BBS) back boxes (sold separately)
- Requires front cover door (WMAD sold separately)
- UL and CSA Listed
| Part # |
Description |
List
Price |
Box
Qty. |
Lashen's
Price |
6 or
More |
Ship
Weight |
| WV100 |
WALL MOUNTED 100 WATT AMPLIFIE |
$ 1,383.80 each |
1 |
$ 629.00 each |
$ 603.84 each |
24 lbs |
Technical Specifications
WV100
/ WV150 / WV250
Data Sheet in Adobe Acrobat Format
| Power Output (RMS): |
| Rated: |
100W Typical @ 1kHz:* 140W |
| Frequency Response |
| Transformer: |
45-20 kHz; 0/-2 dB |
| Direct: |
20-20 kHz; 0/-1 dB |
| Distortion |
| Transformer: |
0.5%** |
| Direct: |
0.1%** (.05 typical @ 1 kHz) |
| Signal-to-Noise(2) |
| Fundamental: |
-94 dB |
| With Aux Module: |
-70 dB |
| With Mic Module: |
-60 dB |
| With Tel Module: |
-70 dB |
| Tone Controls |
| Bass Frequency: |
100 Hz (+/- 10 dB minimum) |
| Treble Frequency: |
10 kHz (+/- 10 dB minimum) |
| Low Cut Frequency: |
125 Hz @ -6 dB/octave |
| Sensitivity |
0.4V (at module connector) |
| Output Regulation: |
2 dB or better, no load to full load |
| Output Impedance |
| Transformer-Coupled: |
70V, 25V, 8 ohms (bal or unbal) |
| Direct Coupled: |
4 ohms |
| Inserts |
| Insert "OUT" Level: |
1VRMS (@FRP) |
| Insert "OUT" Impedance: |
50 ohms maximum |
| Insert "IN" Sensitivity: |
1VRMS |
| Insert "IN" Impedance: |
10k ohms minimum |
| Pre-EQ Output |
| Output Level: |
4VRMS (@FRP) |
| Output Impedance: |
50 ohms maximum |
| AC Power Receptacle: |
500 watts maximum power, unswitched |
| AC Voltage: |
120V AC, 60Hz |
| AC Current: |
2.0A |
| Product Weight (lb.): |
24 |
| Dimensions: |
14-1/8" W x 21" H |
* Typical,@1kHz/0.1% THD/4.)
** THD+N, Maximum, Full bandwidth @ FRP
(2) Referenced to FRP output level, 20-20kHz bandwidth limited.
150 watt Wall-Mount Power Vector Modular Amplifier
Bogen's Wall-Mount Power Vector modular amplifiers offer a wide range
of power from which to choose from, with three models ranging from 100W to
250W. The amplifiers are designed to work with both high- (70/25V) and
low- (4/8-ohm) impedance speaker systems. Each model includes eight module
bays for plug-in input modules and allows for up to four levels of
priority between modules. Two module bays are capable of accepting signal
processing plug-in output modules. Each module is controlled by an
independent volume control with an associated signal/clip LED for signal
status. An 11-segment LED output meter monitors output signal level. Each
model includes a motorized master volume control that can be controlled
using a remote volume control panel (RVCP, sold separately).
- 100-,150-, and 250-watt models, each with a large power reserve
- Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads
- 8 module bays
- Wide selection of advanced plug-in modules
- 2 module bays capable of handling signal processing plug-in output modules
- 4 levels of priority between modules
- 11-segment LED output level meter monitors the output level of the power amplifier with Peak and Average meter switch
- Adjustable output level limiter with limit indicator
- Tape output available on front of unit
- Optional front-mounted input combo jack with 1/4" stereo phone and female XLR capabilities
- Motorized master volume control can be remotely operated
- Bass and treble controls with center detent
- Two-color LED for each channel indicates input active/clipping
- Switch permits user to select either transformer coupled outputs or a direct low-impedance output
- Bass and treble control bypass switch (located in module bay 6)
- 125 Hz Lo-cut feature (switch located in module bay 6)
- 5-position barrier strip, with clamping washers, provides connections for speaker loads
- Master mute function overrides all audio from the mixer section of the amplifier
- Screw terminal for master mute and remote volume control functions
- Each of the 8 module bays has an associated independent volume control
- Remote volume control panel (RVCP) (sold separately)
- Requires flush-mount (Model BBF) or surface mount (Model BBS) back boxes (sold separately)
- Requires front cover door (WMAD sold separately)
- UL and CSA Listed
| Part # |
Description |
List
Price |
Box
Qty. |
Lashen's
Price |
6 or
More |
Ship
Weight |
| WV150 |
WALL MOUNTED 150 WATT AMPLIFIE |
$ 1,626.46 each |
1 |
$ 739.30 each |
$ 709.73 each |
28 lbs |
Technical Specifications
WV100
/ WV150 / WV250
Data Sheet in Adobe Acrobat Format
| Power Output (RMS): |
| Rated: |
150W Typical @ 1kHz:* 200W |
| Frequency Response |
| Transformer: |
45-20 kHz; 0/-2 dB |
| Direct: |
20-20 kHz; 0/-1 dB |
| Distortion |
| Transformer: |
0.5%** |
| Direct: |
0.1%** (.05 typical @ 1 kHz) |
| Signal-to-Noise(2) |
| Fundamental: |
-94 dB |
| With Aux Module: |
-70 dB |
| With Mic Module: |
-60 dB |
| With Tel Module: |
-70 dB |
| Tone Controls |
| Bass Frequency: |
100 Hz (+/- 10 dB minimum) |
| Treble Frequency: |
10 kHz (+/- 10 dB minimum) |
| Low Cut Frequency: |
125 Hz @ -6 dB/octave |
| Sensitivity |
0.4V (at module connector) |
| Output Regulation: |
2 dB or better, no load to full load |
| Output Impedance |
| Transformer-Coupled: |
70V, 25V, 8 ohms (bal or unbal) |
| Direct Coupled: |
4 ohms |
| Inserts |
| Insert "OUT" Level: |
1VRMS (@FRP) |
| Insert "OUT" Impedance: |
50 ohms maximum |
| Insert "IN" Sensitivity: |
1VRMS |
| Insert "IN" Impedance: |
10k ohms minimum |
| Pre-EQ Output |
| Output Level: |
4VRMS (@FRP) |
| Output Impedance: |
50 ohms maximum |
| AC Power Receptacle: |
500 watts maximum power, unswitched |
| AC Voltage: |
120V AC, 60Hz |
| AC Current: |
3.5A |
| Product Weight (lb.): |
28 |
| Dimensions: |
14-1/8" W x 21" H |
* Typical,@1kHz/0.1% THD/4.)
** THD+N, Maximum, Full bandwidth @ FRP
(2) Referenced to FRP output level, 20-20kHz bandwidth limited.
250 watt Wall-Mount Power Vector Modular Amplifier
Bogen's Wall-Mount Power Vector modular amplifiers offer a wide range
of power from which to choose from, with three models ranging from 100W to
250W. The amplifiers are designed to work with both high- (70/25V) and
low- (4/8-ohm) impedance speaker systems. Each model includes eight module
bays for plug-in input modules and allows for up to four levels of
priority between modules. Two module bays are capable of accepting signal
processing plug-in output modules. Each module is controlled by an
independent volume control with an associated signal/clip LED for signal
status. An 11-segment LED output meter monitors output signal level. Each
model includes a motorized master volume control that can be controlled
using a remote volume control panel (RVCP, sold separately).
- 100-,150-, and 250-watt models, each with a large power reserve
- Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads
- 8 module bays
- Wide selection of advanced plug-in modules
- 2 module bays capable of handling signal processing plug-in output modules
- 4 levels of priority between modules
- 11-segment LED output level meter monitors the output level of the power amplifier with Peak and Average meter switch
- Adjustable output level limiter with limit indicator
- Tape output available on front of unit
- Optional front-mounted input combo jack with 1/4" stereo phone and female XLR capabilities
- Motorized master volume control can be remotely operated
- Bass and treble controls with center detent
- Two-color LED for each channel indicates input active/clipping
- Switch permits user to select either transformer coupled outputs or a direct low-impedance output
- Bass and treble control bypass switch (located in module bay 6)
- 125 Hz Lo-cut feature (switch located in module bay 6)
- 5-position barrier strip, with clamping washers, provides connections for speaker loads
- Master mute function overrides all audio from the mixer section of the amplifier
- Screw terminal for master mute and remote volume control functions
- Each of the 8 module bays has an associated independent volume control
- Remote volume control panel (RVCP) (sold separately)
- Requires flush-mount (Model BBF) or surface mount (Model BBS) back boxes (sold separately)
- Requires front cover door (WMAD sold separately)
- UL and CSA Listed
| Part # |
Description |
List
Price |
Box
Qty. |
Lashen's
Price |
6 or
More |
Ship
Weight |
| WV250 |
WALL MOUNTED 250 WATT AMPLIFIE |
$ 2,097.92 each |
1 |
$ 953.60 each |
$ 915.46 each |
32 lbs |
Technical Specifications
WV100
/ WV150 / WV250
Data Sheet in Adobe Acrobat Format
| Power Output (RMS): |
| Rated: |
250W Typical @ 1kHz:* 340W |
| Frequency Response |
| Transformer: |
45-20 kHz; 0/-2 dB |
| Direct: |
20-20 kHz; 0/-1 dB |
| Distortion |
| Transformer: |
0.5%** |
| Direct: |
0.1%** (.05 typical @ 1 kHz) |
| Signal-to-Noise(2) |
| Fundamental: |
-94 dB |
| With Aux Module: |
-70 dB |
| With Mic Module: |
-60 dB |
| With Tel Module: |
-70 dB |
| Tone Controls |
| Bass Frequency: |
100 Hz (+/- 10 dB minimum) |
| Treble Frequency: |
10 kHz (+/- 10 dB minimum) |
| Low Cut Frequency: |
125 Hz @ -6 dB/octave |
| Sensitivity |
0.4V (at module connector) |
| Output Regulation: |
2 dB or better, no load to full load |
| Output Impedance |
| Transformer-Coupled: |
70V, 25V, 8 ohms (bal or unbal) |
| Direct Coupled: |
4 ohms |
| Inserts |
| Insert "OUT" Level: |
1VRMS (@FRP) |
| Insert "OUT" Impedance: |
50 ohms maximum |
| Insert "IN" Sensitivity: |
1VRMS |
| Insert "IN" Impedance: |
10k ohms minimum |
| Pre-EQ Output |
| Output Level: |
4VRMS (@FRP) |
| Output Impedance: |
50 ohms maximum |
| AC Power Receptacle: |
500 watts maximum power, unswitched |
| AC Voltage: |
120V AC, 60Hz |
| AC Current: |
5.5A |
| Product Weight (lb.): |
32 |
| Dimensions: |
14-1/8" W x 21" H |
* Typical,@1kHz/0.1% THD/4.)
** THD+N, Maximum, Full bandwidth @ FRP
(2) Referenced to FRP output level, 20-20kHz bandwidth limited.
