Computer Products
and
Video Game Products
Click for more info
Bogen's Power Vector modular input amplifier series offers a wide range of power from which to choose from, with five models ranging from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low-impedance (4/8-ohm) speaker systems. Each model includes eight module bays for input modules and allows up to four levels of priority between modules. Two module bays are also capable of accepting signal processing output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level. Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).
| Part # | Description | List Price |
Box Qty. |
Lashen's Price |
6 or More |
Ship Weight |
|---|---|---|---|---|---|---|
| V35 | 35 WATT POWER VECTOR MOD AMP | $ 580.14 each | 1 | $ 263.70 each | $ 253.15 each | 24 lbs |
PVSC
- Power Vector Security Cover
RVCP - Remote
Volume Control Panel
RPK87 -
Rack Mount Kit for Power Vector Amplifiers
Input Modules for the
Power Vector Amplifiers
Output Modules for the Power Vector Amplifiers
| Power Output (RMS): | |
| Rated: | 35W Typical @ 1kHz:* 45W |
| Frequency Response | |
| Transformer: | 45-20 kHz; 0/-2 dB |
| Direct: | 20-20 kHz; 0/-1 dB |
| Distortion | |
| Transformer: | 0.5%** |
| Direct: | 0.1%** (.05 typical @ 1 kHz) |
| Signal-to-Noise(2) | |
| Fundamental: | -94 dB |
| With Aux Module: | -70 dB |
| With Mic Module: | -60 dB |
| With Tel Module: | -70 dB |
| Tone Controls | |
| Bass Frequency: | 100 Hz (+/- 10 dB minimum) |
| Treble Frequency: | 10 kHz (+/- 10 dB minimum) |
| Low Cut Frequency: | 125 Hz @ -6 dB/octave |
| Sensitivity | 0.4V (at module connector) |
| Output Regulation: | 2 dB or better, no load to full load |
| Output Impedance | |
| Transformer-Coupled: | 70V, 25V, 8 ohms (bal or unbal) |
| Direct Coupled: | 4 ohms |
| Inserts | |
| Insert "OUT" Level: | 1VRMS (@FRP) |
| Insert "OUT" Impedance: | 50 ohms maximum |
| Insert "IN" Sensitivity: | 1VRMS |
| Insert "IN" Impedance: | 10k ohms minimum |
| Pre-EQ Output | |
| Output Level: | 4VRMS (@FRP) |
| Output Impedance: | 50 ohms maximum |
| AC Power Receptacle: | 500 watts maximum power, unswitched |
| AC Voltage: | 120V AC, 60Hz |
| AC Current: | 0.6A |
| Product Weight (lb.): | 24 |
| Dimensions: | 16-1/2" W x 3-1/2" H x 12" D |
* Typical,@1kHz/0.1% THD/4.)
** THD+N, Maximum, Full bandwidth @ FRP
(2) Referenced to FRP output level, 20-20kHz bandwidth limited.
Bogen's Power Vector modular input amplifier series offers a wide range of power from which to choose from, with five models ranging from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low-impedance (4/8-ohm) speaker systems. Each model includes eight module bays for input modules and allows up to four levels of priority between modules. Two module bays are also capable of accepting signal processing output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level. Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).
| Part # | Description | List Price |
Box Qty. |
Lashen's Price |
6 or More |
Ship Weight |
|---|---|---|---|---|---|---|
| V60 | 60 WATT POWER VECTOR MOD AMP | $ 794.42 each | 1 | $ 361.10 each | $ 346.66 each | 28 lbs |
PVSC
- Power Vector Security Cover
RVCP - Remote
Volume Control Panel
RPK87 -
Rack Mount Kit for Power Vector Amplifiers
Input Modules for the
Power Vector Amplifiers
Output Modules for the Power Vector Amplifiers
| Power Output (RMS): | |
| Rated: | 60W Typical @ 1kHz:* 85W |
| Frequency Response | |
| Transformer: | 45-20 kHz; 0/-2 dB |
| Direct: | 20-20 kHz; 0/-1 dB |
| Distortion | |
| Transformer: | 0.5%** |
| Direct: | 0.1%** (.05 typical @ 1 kHz) |
| Signal-to-Noise(2) | |
| Fundamental: | -94 dB |
| With Aux Module: | -70 dB |
| With Mic Module: | -60 dB |
| With Tel Module: | -70 dB |
| Tone Controls | |
| Bass Frequency: | 100 Hz (+/- 10 dB minimum) |
| Treble Frequency: | 10 kHz (+/- 10 dB minimum) |
| Low Cut Frequency: | 125 Hz @ -6 dB/octave |
| Sensitivity: | 0.4V (at module connector) |
| Output Regulation: | 2 dB or better, no load to full load |
| Output Impedance | |
| Transformer-Coupled: | 70V, 25V, 8 ohms (bal or unbal) |
| Direct Coupled: | 4 ohms |
| Inserts | |
| Insert "OUT" Level: | 1VRMS (@FRP) |
| Insert "OUT" Impedance: | 50 ohms maximum |
| Insert "IN" Sensitivity: | 1VRMS |
| Insert "IN" Impedance: | 10k ohms minimum |
| Pre-EQ Output | |
| Output Level: | 4VRMS (@FRP) |
| Output Impedance: | 50 ohms maximum |
| AC Power Receptacle: | 500 watts maximum power, unswitched |
| AC Voltage: | 120V AC, 60Hz |
| AC Current: | 0.6A |
| Product Weight (lb.): | 28 |
| Dimensions: | 16-1/2" W x 3-1/2" H x 12" D |
* Typical,@1kHz/0.1% THD/4.)
** THD+N, Maximum, Full bandwidth @ FRP
(2) Referenced to FRP output level, 20-20kHz bandwidth limited.
Bogen's Power Vector modular input amplifier series offers a wide range of power from which to choose from, with five models ranging from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low-impedance (4/8-ohm) speaker systems. Each model includes eight module bays for input modules and allows up to four levels of priority between modules. Two module bays are also capable of accepting signal processing output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level. Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).
| Part # | Description | List Price |
Box Qty. |
Lashen's Price |
6 or More |
Ship Weight |
|---|---|---|---|---|---|---|
| V100 | 100 WATT POWER VECTOR MOD AMP | $ 870.10 each | 1 | $ 395.50 each | $ 379.68 each | 32 lbs |
PVSC
- Power Vector Security Cover
RVCP - Remote
Volume Control Panel
RPK87 -
Rack Mount Kit for Power Vector Amplifiers
Input Modules for the
Power Vector Amplifiers
Output Modules for the Power Vector Amplifiers
| Power Output (RMS): | |
| Rated: | 100W Typical @ 1kHz:* 140W |
| Frequency Response | |
| Transformer: | 45-20 kHz; 0/-2 dB |
| Direct: | 20-20 kHz; 0/-1 dB |
| Distortion | |
| Transformer: | 0.5%** |
| Direct: | 0.1%** (.05 typical @ 1 kHz) |
| Signal-to-Noise(2) | |
| Fundamental: | -94 dB |
| With Aux Module: | -70 dB |
| With Mic Module: | -60 dB |
| With Tel Module: | -70 dB |
| Tone Controls | |
| Bass Frequency: | 100 Hz (+/- 10 dB minimum) |
| Treble Frequency: | 10 kHz (+/- 10 dB minimum) |
| Low Cut Frequency: | 125 Hz @ -6 dB/octave |
| Sensitivity | 0.4V (at module connector) |
| Output Regulation: | 2 dB or better, no load to full load |
| Output Impedance | |
| Transformer-Coupled: | 70V, 25V, 8 ohms (bal or unbal) |
| Direct Coupled: | 4 ohms |
| Inserts | |
| Insert "OUT" Level: | 1VRMS (@FRP) |
| Insert "OUT" Impedance: | 50 ohms maximum |
| Insert "IN" Sensitivity: | 1VRMS |
| Insert "IN" Impedance: | 10k ohms minimum |
| Pre-EQ Output | |
| Output Level: | 4VRMS (@FRP) |
| Output Impedance: | 50 ohms maximum |
| AC Power Receptacle: | 500 watts maximum power, unswitched |
| AC Voltage: | 120V AC, 60Hz |
| AC Current: | 0.6A |
| Product Weight (lb.): | 32 |
| Dimensions: | 16-1/2" W x 3-1/2" H x 12" D |
* Typical,@1kHz/0.1% THD/4.)
** THD+N, Maximum, Full bandwidth @ FRP
(2) Referenced to FRP output level, 20-20kHz bandwidth limited.
Bogen's Power Vector modular input amplifier series offers a wide range of power from which to choose from, with five models ranging from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low-impedance (4/8-ohm) speaker systems. Each model includes eight module bays for input modules and allows up to four levels of priority between modules. Two module bays are also capable of accepting signal processing output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level. Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).
| Part # | Description | List Price |
Box Qty. |
Lashen's Price |
6 or More |
Ship Weight |
|---|---|---|---|---|---|---|
| V150 | 150 WATT POWER VECTOR MOD AMP | $ 945.78 each | 1 | $ 429.90 each | $ 412.70 each | 35 lbs |
PVSC
- Power Vector Security Cover
RVCP - Remote
Volume Control Panel
RPK87 -
Rack Mount Kit for Power Vector Amplifiers
Input Modules for the
Power Vector Amplifiers
Output Modules for the Power Vector Amplifiers
| Power Output (RMS): | |
| Rated: | 150W Typical @ 1kHz:* 200W |
| Frequency Response | |
| Transformer: | 45-20 kHz; 0/-2 dB |
| Direct: | 20-20 kHz; 0/-1 dB |
| Distortion | |
| Transformer: | 0.5%** |
| Direct: | 0.1%** (.05 typical @ 1 kHz) |
| Signal-to-Noise(2) | |
| Fundamental: | -94 dB |
| With Aux Module: | -70 dB |
| With Mic Module: | -60 dB |
| With Tel Module: | -70 dB |
| Tone Controls | |
| Bass Frequency: | 100 Hz (+/- 10 dB minimum) |
| Treble Frequency: | 10 kHz (+/- 10 dB minimum) |
| Low Cut Frequency: | 125 Hz @ -6 dB/octave |
| Sensitivity | 0.4V (at module connector) |
| Output Regulation: | 2 dB or better, no load to full load |
| Output Impedance | |
| Transformer-Coupled: | 70V, 25V, 8 ohms (bal or unbal) |
| Direct Coupled: | 4 ohms |
| Inserts | |
| Insert "OUT" Level: | 1VRMS (@FRP) |
| Insert "OUT" Impedance: | 50 ohms maximum |
| Insert "IN" Sensitivity: | 1VRMS |
| Insert "IN" Impedance: | 10k ohms minimum |
| Pre-EQ Output | |
| Output Level: | 4VRMS (@FRP) |
| Output Impedance: | 50 ohms maximum |
| AC Power Receptacle: | 500 watts maximum power, unswitched |
| AC Voltage: | 120V AC, 60Hz |
| AC Current: | 0.6A |
| Product Weight (lb.): | 35 |
| Dimensions: | 16-1/2" W x 3-1/2" H x 12" D |
* Typical,@1kHz/0.1% THD/4.)
** THD+N, Maximum, Full bandwidth @ FRP
(2) Referenced to FRP output level, 20-20kHz bandwidth limited.
Bogen's Power Vector modular input amplifier series offers a wide range of power from which to choose from, with five models ranging from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low-impedance (4/8-ohm) speaker systems. Each model includes eight module bays for input modules and allows up to four levels of priority between modules. Two module bays are also capable of accepting signal processing output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level. Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).
| Part # | Description | List Price |
Box Qty. |
Lashen's Price |
6 or More |
Ship Weight |
|---|---|---|---|---|---|---|
| V250 | 250 WATT POWER VECTOR MOD AMP | $ 1,197.90 each | 1 | $ 544.50 each | $ 522.72 each | 40 lbs |
PVSC
- Power Vector Security Cover
RVCP - Remote
Volume Control Panel
RPK87 -
Rack Mount Kit for Power Vector Amplifiers
Input Modules for the
Power Vector Amplifiers
Output Modules for the Power Vector Amplifiers
| Power Output (RMS): | |
| Rated: | 250W Typical @ 1kHz:* 340W |
| Frequency Response | |
| Transformer: | 45-20 kHz; 0/-2 dB |
| Direct: | 20-20 kHz; 0/-1 dB |
| Distortion | |
| Transformer: | 0.5%** |
| Direct: | 0.1%** (.05 typical @ 1 kHz) |
| Signal-to-Noise(2) | |
| Fundamental: | -94 dB |
| With Aux Module: | -70 dB |
| With Mic Module: | -60 dB |
| With Tel Module: | -70 dB |
| Tone Controls | |
| Bass Frequency: | 100 Hz (+/- 10 dB minimum) |
| Treble Frequency: | 10 kHz (+/- 10 dB minimum) |
| Low Cut Frequency: | 125 Hz @ -6 dB/octave |
| Sensitivity | 0.4V (at module connector) |
| Output Regulation: | 2 dB or better, no load to full load |
| Output Impedance | |
| Transformer-Coupled: | 70V, 25V, 8 ohms (bal or unbal) |
| Direct Coupled: | 4 ohms |
| Inserts | |
| Insert "OUT" Level: | 1VRMS (@FRP) |
| Insert "OUT" Impedance: | 50 ohms maximum |
| Insert "IN" Sensitivity: | 1VRMS |
| Insert "IN" Impedance: | 10k ohms minimum |
| Pre-EQ Output | |
| Output Level: | 4VRMS (@FRP) |
| Output Impedance: | 50 ohms maximum |
| AC Power Receptacle: | 500 watts maximum power, unswitched |
| AC Voltage: | 120V AC, 60Hz |
| AC Current: | 0.6A |
| Product Weight (lb.): | 40 |
| Dimensions: | 16-1/2" W x 3-1/2" H x 12" D |
* Typical,@1kHz/0.1% THD/4.)
** THD+N, Maximum, Full bandwidth @ FRP
(2) Referenced to FRP output level, 20-20kHz bandwidth limited.
Bogen's Power Vector Mixer is an 8-channel mixer/pre-amplifier, offering a wide variety of operational features and functions for superior audio performance. Eight module bays accept plug-in input modules, allowing up to four levels of priority between modules. Two module bays are capable of accepting signal processing plug-in output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status, and an 11-segment LED output level meter that monitors output signal level. In addition, the VMIX has a motorized master volume control (that can be controlled using a remote control panel, RVCP, sold separately), bass and treble control, peak hold switch, unbalanced output jack, and balanced output terminal. Optional security covers prevent tampering of settings. The VMIX can be used for various applications including foreground music, background music, and paging. For large applications, several VMIX units can be bridged together.
| Part # | Description | List Price |
Box Qty. |
Lashen's Price |
6 or More |
Ship Weight |
|---|---|---|---|---|---|---|
| VMIX | VECTOR PRE-AMP MIXER | $ 537.02 each | 1 | $ 244.10 each | $ 234.34 each | 18 lbs |
VMIX Data Sheet
in Adobe Acrobat Format
