Cone Speakers

Models MPS1B (Black) / MPS1W (White)

• 4-1/2" Low-Frequency Driver (S4);
  5-1/4" Low-Frequency Driver (S5)
• NEAR Patented MLS Ferrofluid Suspension, and NEAR MDT Metal Alloy Cone
• 1" High-Frequency Titanium Drivers with Ferrofluid Damping (S5 speaker is horn-loaded)
• High-Resolution Metal Cone Drivers with Broad Dispersion
• Compact swivel mount bracket included
• Thick wall, low-resonance cabinet structure for better musical clarity
• For 70V and low-impedance systems

Model HFCS1

• Installs into a variety of ceiling environments including suspended and hard surface ceilings
• Large heavy-gauge plated steel back can for deep bass response
• Computer-matched dual venting system for full bass output
• Wide dispersion coaxial driver provides broad, even coverage
• Good off-axis response with smooth contouring
• For 16-ohm, 70V, & 100V systems
• Off-white finish
• Complies with UL-2043

Model HFCS1LP

• 6-3/4" mounting depth for installations into a variety of ceiling environments including suspended and hard surface ceilings
• Low-profile housing allows greater range of installation depths
• Computer-matched venting system for full bass output
• Wide dispersion coaxial driver provides broad, even coverage
• For 16-ohm, 70V, & 100V systems
• Off-white finish
• Complies with UL-2043

Model HFSF1

• Superior sound in a very compact enclosure (7-1/4" diameter)
• Wide-dispersion coaxial driver for broad, even coverage; superb off-axis response
• Only 6-1/4" diameter ceiling opening required
• Installs in a wide range of ceiling types
• For 70V and low-impedance systems
• Off-white paintable finish

Model CSUB

• 8" Woofer provides superior bass reproduction
• Installs in suspended ceilings or drywall
• Frequency response: 40 Hz - 125 Hz
• Heavy-gauge steel back can
• For 8-ohm and 70V systems
• Off-white finish

Model CSD1X2/U with back can

Model CSD1X2VR/U with back can and recessed volume control

• Easy assembly saves installation time, effort, and cost
• Recessed volume control accessible from front of grille on CSD1X2VR Series
• 1' x 2' perforated grille over entire front; off-white or bright white finish
• 8" cone speaker with 10 oz. magnet and tweeter, and 25/70V transformer
• 5 power taps (4W, 2W, 1W, 1/2W, & 1/4W); selectable by rotary switch
• Tile support rail (included)
• Complies with NFPA National Code 160b and UL-2043

Model CSD2X2/U with back can

Model CSD2X2VR/U with back can and recessed volume control

• Easy assembly saves installation time, effort, and cost
• Recessed volume control accessible from front of grille on CSD2X2VR Series
• Tile support rail for 2' x 4' ceilings included
• 2' x 2' perforated grille over entire front; off-white or bright white finish
• 8" cone speaker with 10 oz. magnet and tweeter, and 25/70V transformer
• 5 power taps (4W, 2W, 1W, 1/2W, & 1/4W); selectable by rotary switch
• Complies with NFPA National Code 160b and UL-2043

Model CSD1X2NB/U with back can

Model CSD1X2NBVR/U with back can and recessed volume control

• Exposed driver
• Recessed volume control accessible from front of grille on CSD1X2NBVR Series
• Easy assembly saves installation time, effort, and cost
• 1' x 2' perforated grille over entire front; off-white or bright white finish
• 8" cone speaker with 6 oz. magnet and tweeter, and 25/70V transformer
• 6 power taps (4W, 2W, 1W, 1/2W, 1/4W & 1/8W); selectable by stripped and tinned leads

Model CSD2X2L/U

• Easy assembly saves installation time, effort, and cost
• 8-ohm, low impedance
• 15W maximum power
• Tile support rail for 2' x 4' ceilings included
• 2' x 2' perforated grille over entire front; off-white or bright white finish
• 8" cone speaker with 10 oz. magnet and tweeter
• Complies with NFPA National Code 160b and UL-2043

Model S86T725PG8/U Transformer & Ceiling Grille

Model S86T725PG8WBR/UBR S86T725PG8 with Barrier Strip Terminals

Model S86T725PG8WVK/UVK S86T725PG8 with Volume Control

Model S86T725PG8WVR/UVR S86T725PG8 with Recessed Volume Control

Model S86T725PG8WBRVK/UBRVK S86T725PG8 with Barrier Strip Terminals & Volume Control

Model S86T725PG8WBRVR/UBRVR S86T725PG8 with Barrier Strip Terminals & Recessed Volume Control

• 4W capacity
• 8" cone speaker with 6oz magnet for excellent audio quality
• 6 power taps available (4W, 2W, 1W, 1/2W, 1/4W, 1/8W)
• Available with recessed or knob volume control
• Pre-assembled for faster installation
• Off-white or bright white enamel over steel grille
• For 70V & 25V systems

Model S810T725PG8W/U Transformer & Ceiling Grille

Model S810T725PG8WVK/UVK S810T725PG8 with Volume Control

Model S810T725PG8WVR/UVR S810T725PG8 with Recessed Volume Control

• 4W capacity
• 8" cone speaker with 10oz magnet for excellent audio quality
• 6 power taps available (4W, 2W, 1W, 1/2W, 1/4W, 1/8W)
• Available with recessed or knob volume control
• Pre-assembled for faster installation
• Off-white or bright white enamel over steel grille
• For 70V & 25V systems

Model CS1EZ

• 1W, single-tap design
• Screw terminal connections for fast installation
• For 70V systems
• Pre-assembled with 8" cone speaker
• Heavy-duty, wire-wound volume control with knob
• Off-white enamel over steel grille

Model SM1EZ & SM4T

• Fast, easy, clean installation
• Direct and reflected sound paths create wide dispersion angle
• Lightweight and durable plastic shell with a paintable off-white finish
• Complies with NFPA National Code 160b and UL-2043 - Report available
• SM1EZ Design Information
• For 25V and 70V systems

Model MB8TSQ Flat Front

Model MB8TSL Angled Front

• Rugged all-steel surface-mounted enclosure; off-white finish
• Full range 8" cone speaker for excellent intelligibility
• Compatible with 25V or 70V amplifier systems
• Multiple taps at 4W, 2W, 1W, 1/2W, 1/4W, & 1/8W
• 4-watt maximum power output
• Available as flat-fronted (MB8TSQ) or with 12.5° angled front (MB8TSL)

Model MB8TSQVR Flat Front with Recessed Volume Control

Model MB8TSLVR Angled Front with Recessed Volume Control

• Rugged all-steel surface-mounted enclosure; off-white finish
• Full range 8" cone speaker for excellent intelligibility
• Compatible with 25V or 70V amplifier systems
• Multiple taps at 4W, 2W, 1W, 1/2W, 1/4W, & 1/8W
• Available as flat-fronted (MB8TSQVR) or with 12.5° angled front (MB8TSLVR)

Model WBS8T725 6oz Magnet

Model WBS810T725 10oz Magnet

Model WBS8T725BR with Screw Terminals

Model WBS8T725BRV with Screw Terminals & Volume Control

Model WBS8T725V with Volume Control

• 4W capacity
• 8" cone speaker for excellent audio quality
• 6 power taps available (4W, 2W, 1W, 1/2W, 1/4W, 1/8W)
• Simulated walnut finish
• Available with volume control ("V" versions)
• Pre-assembled for faster installation
• Works with both 70V and 25V amplifier outputs

Model WB1EZ

• 1W, single-tap design
• Screw terminal connections for fast installation
• For 70V systems
• Pre-assembled with 8" cone speaker
• Recessed volume control
• Simulated walnut finish