ZPM-3 Paging Module, 3-Zone from Bogen and Lashen Electronics

Model ZPM3

Three Zone Paging Module

The Bogen ZPM3 is a telephone-compatible zone paging module with all-call and talk back capabilities serving up to three one- or two-way paging zones. The ZPM3 can also be used in a paging system independent of a telephone system.

The ZPM3 works with self-amplified or central-amplified paging systems. A background music source can be connected directly to the ZPM3, or to a separate amplifier that can be used to supply background music to all unpaged zones. Built-in DIP switches are used to select the field-programming mode, enable/disable the pre-announce and confirmation tones, and set the paging mode (one-way or talk back) of each zone.

Field-programming is used to assign individual zones to the paging zone groups, night ringer zone group, and shift change/emergency-call zone group*. Field-programming is also used to enable/disable the privacy beep for two-way zones, select the shift change/emergency-call tone, and inhibit all-call operation.

A control is included to adjust the volume of the preannounce, confirmation, and shift change/emergency-call tones. Separate controls are provided to adjust the night ringer tone and background music volume. All volume controls are screwdriver-adjustable.

Part #	Description	List Price	Box Qty.	Lashen's Price	6 or More	Ship Weight
ZPM3	3 ZONE PAGING MODULE	$ 514.58 each	1	$ 233.90 each	$ 224.54 each	3 lbs

Function	Available Tones	Notes
Shift Change / Emergency Call	Burst	One play only
Shift Change / Emergency Call	Two Dual Beeps	One play only
Night Ring	Warble	Follows ring cadence
Pre-announce (tone can be inhibited)	Beep	Plays once at start of page
Privacy Beep (tone can be inhibited)	Beep	Once every 15s during talkback only

Features:

3 Zone paging plus All-Call
3 Field-programmable paging zone groups (1-3 zones in each)
One-way and two-way paging (talk back operation requires TBA15 Talk Back amplifier)
Direct connection to page ports (requires contact closures), loop-start and ground start trunks
Connection to an analog station line (station port) possible when used with a suitable telephone access module, i.e., Bogen Model TAMB
100W total power handling capacity
Background music input
DIP switches select zone type (one way or talk back), talk battery (24V/48V), and tone options
Built-in night ringer in all zones or group of three user-selected zones
Shift change or emergency-call (with alert tone) in all zones or group of three user-selected zone*
Programmable all-call inhibit and privacy beep for talk back zones
Built-in punch block (type 66) speeds installation
Separate volume controls for tones, night ring, and background music
Works with self-amplified or central amplifier paging systems
Optional battery backup
24V power supply required - Bogen Model PRSLSI power supply recommended
Terminals provided for connection to an additional 48V power supply when 48V talk battery operation required (Bogen PRS48 power supply recommended)
Registered under Part 68 of FCC rules
Includes flanges with keyhole slots for wall-mounting

* The shift change/emergency-call feature requires additional customer-supplied equipment - master clock with a contact closure or preamplified microphone with built-in or external contact closure.

Technical Specifications

Ringer Equivalence:	1.2B
Operating Voltage:	24V DC, 350 mA minimum. Model PRSLSI Power Supply Recommended
Operating Current (Max.):	350 mA
Audio Power Capability:	100W (70V AC or 25V AC)
DTMF Tones:	Signal Level - 25 dBm; Twist Limit -10 dB; Tone Duration (min.) - 40 ms; Interdigit Pause - 40 ms
Zone Selection:	Dial Pulse Speed - 8 to 20 ppm; Percent Break - 52% to 64%
Environmental:	Operating Temperature - 0° to 125°F; Operating Humidity - 0 to 95% non condensing
Dimensions (Overall):	9" W x 7-1/4" H x 1-3/8" D (includes wall-mounting flange)
Shipping Weight:	4 lb.

Registered under Part 68 of FCC Rules

Model TAMB

Telephone Access Module

The TAMB interfaces a telephone system with a paging system. Station port or trunk port operation. Features calling-party-controlled disconnect and volume-adjustable preannounce or confirmation tones. Includes background music input jack and volume control. Complies with Part 68 of FCC Rules.

Dual mode, station port or trunk port paging access
24V or 48 volt operation (trunk port mode)
Preannounce and confirmation tones
Calling party controlled disconnect

Tone	Click Arrow ► to play
Confirmation

Dimensions: 8-1/8" x 1-1/8" x 4-½". Shipping weight: 2 lbs.

Power requirements are:

Station port mode - none
Trunk port mode - 24VDC @ 90mA or 48VDC @ 105mA

Model PRS48 power supply recommended.

Part #	Description	List Price	Box Qty.	Lashen's Price	6 or More	Ship Weight
TAMB	TELEPHONE ACCESS MODULE	$ 333.08 each	1	$ 151.40 each	$ 145.34 each	2 lbs

Loop Start Interface/Power Supply

Click for larger image

Specs

PRSLSI

24V Talk battery supply for loop start ports
Buffered audio output for up to 25 self-amplified speakers
450 mA, 24V DC power supply for external equipment
Integral flanges and rubber feet for wall- or shelf-mounting
6-terminal barrier strip

Bogen PN: PRSLSI
  PWR SUPPLY, 24V 3 WIRE
List Price:$ 113.30 each   Box Qty: 1
Lashen's Price:$ 64.38 each
6 or More:$ 56.65 each   Ship Wt.: 3 lbs

Model PRS48

48VDC, 100mA Power Supply

Bogen DC Power Supplies are designed to supply power to battery-operated and other low voltage DC equipment from a 120V AC source. They are rugged, versatile, and dependable, and are suitable for many types of telephone paging equipment, amplified speakers and horns, tone generators, and intercom systems.

The PRS48 provides 48V DC at 100 mA, as required for various telephone paging access devices. The PRS48 is UL Listed.