High Fidelity Speakers

The Bogen HFCS1 ceiling loudspeaker delivers superior sound and clear intelligibility in a variety of ceiling environments. The system can be easily installed in hard surfaced ceilings, suspended ceilings, and new constructions. The HFCS1 offers several levels of power output via a front-mounted rotary switch. The low-distortion speaker design, coupled with dual front exit ports, delivers high intelligibility and exceptional low-frequency response for both music and speech reinforcement.

• Installs into a variety of ceiling environments including suspended and hard surface ceilings
• Large heavy-gauge plated steel back can for deep bass response
• Computer-matched dual venting system for full bass output
• Wide dispersion coaxial driver provides broad, even coverage
• Good off-axis response with smooth contouring
• For 16-ohm, 70V, & 100V systems

The Bogen HFCS1LP ceiling loudspeaker delivers superior sound and clear intelligibility in a variety of ceiling environments. The system can be easily installed in hard surfaced ceilings, suspended ceilings, and new constructions. The HFCS1LP offers several levels of power output via a front-mounted rotary switch. The low-distortion speaker design, coupled with dual front exit ports, delivers high intelligibility and exceptional low-frequency response for both music and speech reinforcement.

• 6-3/4" mounting depth for installations into a variety of ceiling environments including suspended and hard surface ceilings
• Low-profile housing allows greater range of installation depths
• Computer-matched venting system for full bass output
• Wide dispersion coaxial driver provides broad, even coverage
• For 16-ohm, 70V, & 100V systems
• Off-white finish

The Orbit Ceiling Speaker (OCS1) is the ideal choice for various types of ceiling environments.

The OCS1 features NEAR's MLS™ and MDT™ technologies (see below), which improve sound quality and increase operating reliability.

The low-distortion speaker design, featuring NEAR's spiderless driver and one-piece metal-alloy cone structure, delivers superb articulation and the highest intelligibility for both music and speech.

The speaker can be easily installed on hard surfaced ceilings, or in suspended ceilings and new construction (with the optional TBCR bracket).

• Solid, one-piece cone structure eliminates the traditional dust cap
• Extremely stable cone structure over long periods of time
• Fast transmission of sound through the diaphragm means low energy storage
• Special hard anodizing process creates a ceramic surface for increased stiffness
• Super-efficient thermal path for cooling the voice coil (not paper or plastic)
• High rigidity and low mass of metal versus typical paper or plastic cones

• Magnetic liquid (Ferrofluid) injected into magnet gap
• Elimination of the conventional cloth centering spider
• Constant lubrication of the gap prevents oxidation from occurring
• Voice coil is most efficiently cooled by fluid path rather than air
• Lower distortion via stronger centering forces on voice coil
• Increased reliability, particularly in high power daily use systems

• Wide-dispersion coaxial driver for broad, even coverage
• Stable, high definition metal-alloy cone
• MDT™ cone design delivers detailed sound
• MLS™ eliminates conventional centering “spider” for more accurate voice coil centering
• High-efficiency drivers deliver superior performance
• Extremely good off-axis response
• Computer-matched venting system for full bass output
• High power handling capability for foreground sound
• Selectable power taps via front-mounted control
• 16-ohm input for non-transformer multi-speaker systems
• Easy wiring with snap-on connector
• Connector provides loop-through to next speaker
• Attachment point for seismic cable (safety cable)
• Input terminal cover with knockouts and safety eyelet provides protection for connections
• Low-resonance cabinet structure
• White textured finish easily painted to match theme decors
• Attractive, contemporary, sturdy steel grille assembly with fine perforations
• Accessory tile bridge support ring (Model TBCR sold separately)
• Accessory 10-foot long cable kit (Model CK10 sold separately)

* Actual color may vary from these samples

• Available in silver (CK10), black (CK10B), & white (CK10W)
• 10 foot long cable with fixed loop
• Use as safety cable
• Cable clamp

Manual

• Supports weight of speakers installed in suspended ceilings
• Use with clamping type ceiling speakers
• 17" W x 1-1/8" H x 24" D

Manual

The Orbit Pendant Speaker (OPS1) is the ideal choice for high ceiling and open space environments.

The OPS1 features NEAR's MLS™ and MDT™ technologies (see below), which improve sound quality and increase operating reliability.

The low-distortion speaker design, featuring NEAR's spiderless driver and one-piece metal-alloy cone structure, delivers superb articulation and the highest intelligibility for both music and speech.

• Solid, one-piece cone structure eliminates the traditional dust cap
• Extremely stable cone structure over extended periods
• Fast transmission of sound through the diaphragm means low energy storage
• Special hard anodizing process creates a ceramic surface for increased stiffness
• Super-efficient thermal path for cooling the voice coil (not paper or plastic)
• High rigidity and low mass versus typical paper or plastic cones

• Magnetic liquid (Ferrofluid) injected into magnet gap
• Constant lubrication of the gap prevents oxidation from occurring
• Voice coil is most efficiently cooled by fluid path rather than air
• Lower distortion via stronger centering forces on voice coil
• Increased reliability, particularly in high power daily use systems

• Wide dispersion coaxial driver for broad, even coverage
• Stable, high definition metal-alloy cone
• MDT™ cone design delivers detailed sound
• MLS™ eliminates conventional centering "spider" for more accurate voice coil centering
• High-efficiency drivers deliver superior performance
• Extremely good off-axis response
• Computer-matched venting system for full bass output
• High power handling capability for foreground sound
• Selectable power taps via front-mounted control
• 16-ohm input for non-transformer multi-speaker systems
• Easy wiring with snap-on connector
• Connector provides loop-through to next speaker
• Easy to use cable suspension system that includes three suspension cables with attached forged eyebolts
• Threaded brass insert point for optional safety cable eye bolt
• Low-resonance cabinet structure
• White or black textured finish easily painted to match theme decors
• Attractive, contemporary, sturdy steel grille assembly with fine perforations
• Accessory 10-foot long cable kit for use as main drop cable or safety cable (Model CK10 sold separately)

* Actual color may vary from these samples

The Orbit Pendant Speaker (OPS1) is the ideal choice for high ceiling and open space environments.

The OPS1 features NEAR's MLS™ and MDT™ technologies (see below), which improve sound quality and increase operating reliability.

The low-distortion speaker design, featuring NEAR's spiderless driver and one-piece metal-alloy cone structure, delivers superb articulation and the highest intelligibility for both music and speech.

• Solid, one-piece cone structure eliminates the traditional dust cap
• Extremely stable cone structure over extended periods
• Fast transmission of sound through the diaphragm means low energy storage
• Special hard anodizing process creates a ceramic surface for increased stiffness
• Super-efficient thermal path for cooling the voice coil (not paper or plastic)
• High rigidity and low mass versus typical paper or plastic cones

• Magnetic liquid (Ferrofluid) injected into magnet gap
• Constant lubrication of the gap prevents oxidation from occurring
• Voice coil is most efficiently cooled by fluid path rather than air
• Lower distortion via stronger centering forces on voice coil
• Increased reliability, particularly in high power daily use systems

• Wide dispersion coaxial driver for broad, even coverage
• Stable, high definition metal-alloy cone
• MDT™ cone design delivers detailed sound
• MLS™ eliminates conventional centering "spider" for more accurate voice coil centering
• High-efficiency drivers deliver superior performance
• Extremely good off-axis response
• Computer-matched venting system for full bass output
• High power handling capability for foreground sound
• Selectable power taps via front-mounted control
• 16-ohm input for non-transformer multi-speaker systems
• Easy wiring with snap-on connector
• Connector provides loop-through to next speaker
• Easy to use cable suspension system that includes three suspension cables with attached forged eyebolts
• Threaded brass insert point for optional safety cable eye bolt
• Low-resonance cabinet structure
• White or black textured finish easily painted to match theme decors
• Attractive, contemporary, sturdy steel grille assembly with fine perforations
• Accessory 10-foot long cable kit for use as main drop cable or safety cable (Model CK10 sold separately)

* Actual color may vary from these samples