V35, V60, V100, V150, V250

• 35W, 60W, 100W, 150W, & 250W models; each with a large power reserve
• 8 module input bays, accepts up to 2 signal-processing output modules or up to 8 input modules
• Four priority levels
• 4-ohm, 8-ohm, 25V, & 70V outputs
• Rack mountable w/ kit (sold separately)
• Click Here for Input Module selection
• Click Here for Output Module selection

GS35, GS60, GS100, GS150, GS250

• 35W, 60W, 100W, 150W, & 250W models
• 7 inputs; 4 MIC (Lo-Z), 1 AUX (Hi-Z), 1 MIC/TEL, 1MIC/AUX
• 4-ohm, 8-ohm, 25V, 25VCT, and 70V outputs
• Dual-function, 10-band graphic equalizer (acoustic EQ/feedback control)

GA2, GA6A

• GA2: 1.5W
  GA6A: 6W
• GA2: 1 input - AUX (Hi-Z)
  GA6A: 2 inputs, 1 MIC (Lo-Z), 1 AUX (Hi-Z)
• GA2: 8-ohm or 600-ohm outputs
  GA6A: 8-ohm, 25V, or 70V outputs
• GA2: 200 Hz - 15 kHz frequency response
  GA6A: 30 Hz - 12 kHz frequency response

WV100, WV150, WV250

• 100W, 150W, & 250W models; each with a large power reserve
• 8 module input bays, accepts up to 2 signal-processing output modules or up to 8 input modules
• Four priority levels
• 4-ohm, 8-ohm, 25V, & 70V outputs
• Wall-mountable with Back Box and Door (sold separately)
• Click Here for Input Module selection
• Click Here for Output Module selection

C10, C10MOH, C20, C20MOH, C35, C60, C100

• 35W, 60W, & 100W models; & 10W & 20W models w/ optional MOH
• 4 inputs (C35/60/100 models): 1 MIC (Lo-Z), 1 AUX (Hi-Z), 1 TEL, plus 1 selectable MIC or AUX
• 3 inputs (all C10/C20 models): 1 MIC (Lo-Z), 1 TEL, plus 1 selectable MIC or AUX
• 4-ohm, 8-ohm, 16-ohm, 25V, & 70V outputs

See the whole Bogen Amplifier selection HERE

M300, M450, M600

• 3 modes of operation: Stereo (4-ohm), Dual Mono (4-ohm), or 70V Mono
• 3 mono power levels: 600W, 900W, or 1200W for 70V speaker systems
• 3 stereo power levels: 300W, 450W, or 600W per channel @ 4 ohms
• 2 x 1 mixer function in mono modes
• 2 Module input bays for flexible modular input capability
• Click below for module selection
• Click Here for Input Module selection
• Click Here for Output Module selection

HTA125A, HTA250A

• 125W & 250W models
• Designed for continuous operation at rated power, up to 120 deg. F; convection-cooled
• Thermal protection and automatic electronic overload protection
• Hi-Z unbalanced and Lo-Z balanced or unbalanced input w/ accessory transformer (TL600)
• 4-ohm, 8-ohm, 25V, & 70V outputs

See the whole Bogen Amplifier selection HERE

X300, X450, X600

• Dual 70V amplifier channels
• 300W, 450W, or 600W per channel for 70V speaker systems
• Transformerless direct drive outputs
• Electronically balanced high-impedance inputs
• Built-in power sequencing of other Black Max amps

MT250D

• 250W (RMS) continuous
• 1 input: Hi-Z unbalanced
• Lo-Z balanced input with accessory transformer
• 8-ohm, 25V, 25VCT, 70V, and 100V outputs
• Operates from 120V/240V AC or 24V back-up battery (not included)
• Battery-saver circuit reduces idle current

BPA60

• 60W model
• 1 input: Hi-Z unbalanced
• Lo-Z balanced input with accessory transformer
• Input level control and lo-cut filter switch
• 8-ohm/25V, 16-ohm, 25VCT, and 70V outputs
• Provides continuous high-quality sound

PM3000

• 3 Pre-amp level outputs, both balanced and unbalanced
• Ground Lift switch
• Auto-switching of inputs based on custom assigned priorities and input audio activity
• Large 10-character alphanumeric display with prompted programming for quick setup
• Password-protected system settings for consistent, foolproof operation

CAM8, CAM8PRO

• 8 independently assignable inputs
• Dual-bus design with Main/AUX output selector for each input
• Pluggable terminal strip connections
• MIC/Line switch for each input and main output; separate AUX input
• Balanced inputs and outputs
• CAM8PRO includes compressor/ limiter, LED output meter, and headphone output

PM3180

• 100W, 60W, & 20W amplifier channels
• 8-ohm, 70V, & 25V transformer coupled outputs; 4-ohm direct output
• Audio inserts for connection to external signal processing equipment
• Auto-switching of inputs based on custom assigned priorities and input audio activity
• Password-protected system settings for consistent, foolproof operation

CAM2

• 4 MIC inputs
• Low-impedance, balanced MIC inputs
• 1 High-impedance AUX input
• Low-noise, active mixing
• Master volume control
• Input clipping indicator for each channel
• 5 segment LED output level meter

• BAL2S - Stereo, Balanced Input Module
• LMM1S - Line/MIC Input, Actively Balanced (Screw Terminal)
• LMR1S - Line/MIC Input w/ Remote, Actively Balanced (Screw Terminal)
• MIC1X - Low-impedance, transformer-balanced microphone input module with XLR connector
• MIC1S - Low-impedance, transformer-balanced microphone input module with screw terminals
• MIC2X - Low-impedance, electronic-balanced microphone input module with XLR connector
• MIC2S - Low-impedance, electronic-balanced microphone input module with screw terminals
• BRG1R - Bridging Input. Daisy chain multiple amplifier inputs
• MAX1R - Unbalanced mono input module
• SAX1R - Unbalanced Stereo input module
• TBL1S - Transformer balanced AUX input module
• TEL1S - Telephone Input - Interfaces to telephone system's loop start/ground start trunks or paging ports
• TNG1S - Multiple tone generator input module

• ANS1R - Ambient Noise Sensor
• ANS500M - Additional Sensor Microphone for ANS1R
• CMP1R - Compressor Limiter
• PEQ1R - Parametric Equalizer
• RIO1S - Relay Input/Output
• MA3 - Module Adapter

• TPU15A - 15 Watt Telephone Paging Amplifier
• TPU35B - 35 Watt Telephone Paging Amplifier
• TPU60B - 60 Watt Telephone Paging Amplifier
• TPU100B - 100 Watt Telephone Paging Amplifier
• TPU250 - 250 Watt Telephone Paging Amplifier

TBA15A

• Hands-free 2-way conversations through the paging system
• 15W of speaker power
• Works on 25V and 70V speaker systems
• Adjustable switching sensitivity control for switching from listen to talk
• Talk Back and page volume controls
• Mute input forces amplifier into page mode