FiberFish II

6' FiberFish II Kit ( 5 Rods - 30ft total )

The Fiberfish II (3/16" orange rods) are non-conductive fiberglass rods.

Rods can be screwed together to make longer lengths for fishing wire in existing walls and attics or across drop ceilings. With a variety of attachments*, it makes fishing wire easy!

*Bullnose Pulling tips included (FIB201), other attachments sold separately.

3' FiberFish II Kit ( 8 Rods - 24ft total )

The Fiberfish II (3/16" orange rods) are non-conductive fiberglass rods.

Rods can be screwed together to make longer lengths for fishing wire in existing walls and attics or across drop ceilings. With a variety of attachments*, it makes fishing wire easy!

*Bullnose Pulling tips included (FIB201), other attachments sold separately.

Bullnose Tips (pack of two)

Replacement tips for the end of the 3' and 6' FiberFish II rods

Fish Hook (Hook Attachment)

Use to retrieve or snag wire & cable. Screws on the end of 3/16" & 5/32" FiberFish II or GlowFish rods or the FIB221 FLEX-FISH

Directional Tool

Used to "walk" the 3/16" & 5/32" FiberFish II or GlowFish rods over obstructions such as drop-ceiling girders, etc.

Magnet Head

Turn any 3/16" & 5/32" FiberFish II or GlowFish rod or Flex-Fish into a magnetic pick-up tool. Also useful for finding the exact spot where the rod is in a wall using the FIB213 FishFinder

Fish Finder Magnetic Finder

Useful in finding the exact spot where one of the Magnetic FiberFish tips - FIB512 or FIB223 - is located behind a wall.

Pull Ring

Universal pull ring attachment for 3/16" & 5/32" FiberFish II or GlowFish. Used to attach multiple wires for larger pulls

Ball Chain

Attach to Fiberfish for interior wall pulls, can be retrieved through small access hole in wall with magnet and Flex-Fish

FiberFish Attachment Kit

Attachments For 3/16" & 5/32" Rods - fits all GlowFish and FiberFish II.

Contains the following tips:

• FIB201 Bullnose Tips (2)
• FIB505 Fish Hook
• FIB511 Directional Tool
• FIB512 Magnet Head
• FIB518 Pull ring
• FIB519 Ball Chain

Comes in a roll-up case

FLEX-FISH 18" Flexible Fish for FiberFish II Attachments

Uses all the attachments that fit the FiberFish II series (FIB200 Series)

18" Flexible shaft - perfect for snaking through unusual passageways.

Can be attached to the FiberFish II 3' or 6' fiberglass rods

Wisp Head

Fits all 3/16" & 5/32" FiberFish II or GlowFish rods. Designed for running wires in cable trays.

Perfect for preventing snags and hang-ups while pulling cables with connectors attached.

10' Fish Chain with Magnetic Retriever

Used to traverse two floors through walls without cutting through wallboard in the middle.

Typical Use:

1. Drill a hole in the top of a section
2. Drop the pulling chain through the hole - The ring will prevent the chain from falling through
3. Drill a hole from directly below the wall section
4. Use the Magnetic Retriever to grab the end of the chain
5. Hook on you pulling wire or string and pull back up.

Screw Tip

Fits all 3/16" & 5/32" FiberFish II or GlowFish rods. Screw into the end of small communication wires for faster and easier pulls. No need to strip wire.

The "Four Pack"

Packed in a handy vinyl pouch. Instructions for use printed on the back of the pouch. Perfect for small install jobs or beginners. Portable and convenient for professionals.

Kit Contains:

• 4 - 3' fiberglass rods
• 1 removable pulling tip
• 1 fish Hook

Fiberfish Attachment Master Pack

Attachments For 3/16" & 5/32" Rods - fits all GlowFish and FiberFish II.

Kit Contains:

• FIB201 Bullnose Tips (2)
• FIB505 Fish Hook
• FIB511 Directional Tool
• FIB512 Magnet Head
• FIB518 Pull ring
• FIB519 Ball Chain
• FIB522 Wisp Head
• FIB525 Screw Tip
• FIB221 Magnetic Retriever