The speaker used in the SD72W is the next generation of Atlas high performance cone loudspeakers, very similar to the preceding C-Series speakers. The similarity in the sonic qualities ensures that contractors and designers who have worked with the Atlas Sound C-Series in the past will know exactly what to expect when they use the SD72W.

Model SD72W is a dual cone, 25 watt 8" (205mm) loudspeaker with a 10oz. (260g) ceramic magnet. It includes a curvilinear, treated paper cone for lower harmonic distortion. The loudspeaker is also equipped with a full 1" diameter copper voice coil with a black anodized aluminum former for better power dissipation. Package includes factory installed 25/70.7V line matching transformer with tap selections ranging from .25 to 5 watts.

Model SD72W operates within a frequency response range of 45Hz-19kHz (nominal) with a sensitivity of 97dB and a dispersion angle of 105°.

The SD72W includes a factory installed CRS baffle with concealed loudspeaker mounting studs and includes screw mount hardware. The SD72W baffle features standard mounting holes to accommodate the majority of Atlas Sound 8" tile bridges, mounting rings and enclosures. When specifying mounting hardware be advised that the dimensions of the SD72W baffle match the Atlas Sound Model 62-8. The baffle finish is white powder coat epoxy.

Features:

• 10oz dual cone speaker provides familiar response & performance
• Quality 5 watt-dual voltage transformer
• Attractive CRS white powder coat baffle
• Individually packaged for stocking & ordering convenience

The speaker used in the SD72WV is the next generation of Atlas high performance cone loudspeakers, very similar to the preceding C-Series speakers. The similarity in the sonic qualities ensures that contractors and designers who have worked with the Atlas Sound C-Series in the past will know exactly what to expect when they use the SD72WV.

Model SD72WV is a 25 watt 8" (205mm) loudspeaker with a 10oz. (260g) ceramic magnet. It includes a curve linear, treated paper cone for lower harmonic distortion. The loudspeaker is also equipped with a full 1" diameter copper voice coil with a black anodized aluminum former for better power dissipation. Model SD72WV operates within a frequency response range of 45Hz-19kHz (nominal) with a sensitivity of 97dB and a dispersion angle of 105°. Package includes factory installed 25/70.7V line matching transformer with tap selections ranging from .25 to 5 watts.

The SD72WV includes a factory installed CRS baffle with concealed loudspeaker mounting studs and includes screw mount hardware. The SD72WV baffle features standard mounting holes to accommodate the majority of Atlas Sound 8" tile bridges, mounting rings and enclosures.

When specifying mounting hardware be advised that the dimensions of the SD72WV baffle match the Atlas Sound Model 62-8. The baffle finish is white powder coat epoxy. The baffle mounted volume control has a 5 watt audio rating and is factory wired to the voice coil. Units are shipped assembled, ready for installation.

Features:

• 10oz speaker provides familiar response & performance
• Quality 5 watt-dual voltage transformer
• Attractive CRS white powder coat baffle with center mounted volume control
• Incorporate or remove volume control knob to suit application requirements
• Individually packaged for stocking & ordering convenience
   

The IS125SYS from Atlas Sound combines ease of installation with superb intelligibility for speech and music reproduction.

The 1′ x 2′ footprint allows quick installation into 2′ x 2′ or 2′ x 4′ acoustic tile ceilings. The E.O. box (with cover) is smartly positioned on the side of the conical enclosure to facilitate rigid or flexible conduit. An external tap selector switch (located on the side of the enclosure) allows for easy system tuning by providing quick installer access to the 70.7V tap settings ranging from .25 to 4 watts.

Features

• 10oz 8″ dual cone speaker with 25V/ 70.7V transformer
• Integral E.O. box for conduit or plenum wire termination
• Low profile conical enclosure
• External tap selector switch

Technical Specifications

Model PM4FA-W uses the familiar response and dispersion of Atlas Sound's model FA134 high performance 4″ Strategy Series® driver. This loudspeaker is the same FA series device used in Atlas Sound's popular FAP42T in-ceiling speaker package. Mounted down-firing in an attractive enclosure, the PM4FA provides natural sounding, wide coverage for low height installations while retaining very impressive full range frequency response for both music and paging applications.

Features

• 4″ FA134 driver provides 130 degree (65 degree off-axis) coverage in the 2kHz octave band
• 70.7V taps @ 1, 2, 4, 8 and 16 Watts plus 8-ohm direct input via concealed terminal block
• Discreet, attractive enclosure
• Cable mounting hardware included
• Compatible with standard 3/4" ceiling fan hardware

Technical Specifications

Model PM4FA-B uses the familiar response and dispersion of Atlas Sound's model FA134 high performance 4″ Strategy Series® driver. This loudspeaker is the same FA series device used in Atlas Sound's popular FAP42T in-ceiling speaker package. Mounted down-firing in an attractive enclosure, the PM4FA provides natural sounding, wide coverage for low height installations while retaining very impressive full range frequency response for both music and paging applications.

Features

• 4″ FA134 driver provides 130 degree (65 degree off-axis) coverage in the 2kHz octave band
• 70.7V taps @ 1, 2, 4, 8 and 16 Watts plus 8-ohm direct input via concealed terminal block
• Discreet, attractive enclosure
• Cable mounting hardware included
• Compatible with standard 3/4" ceiling fan hardware

Technical Specifications

Model PM8GD-W uses the popular Atlas Sound GD series coaxial driver to provide familiar response and high efficiency while retaining economy when high density speaker counts are required in page only applications.

Features

• 8″ GD87 driver provides 120 degree (60 degree off-axis) coverage in the 2kHz octave band
• 70.7V taps @ 1, 2, 4 and 8 watts plus 8-ohm direct input via concealed terminal block
• Extreme high efficiency (96dB 1W/1M) allows for lower tap settings and more loudspeakers per amp channel in many installations
• Cable mounting hardware included
• Compatible with standard 3/4″ ceiling fan hardware

Technical Specifications

Model PM8GD-B uses the popular Atlas Sound GD series coaxial driver to provide familiar response and high efficiency while retaining economy when high density speaker counts are required in page only applications.

Features

• 8″ GD87 driver provides 120 degree (60 degree off-axis) coverage in the 2kHz octave band
• 70.7V taps @ 1, 2, 4 and 8 watts plus 8-ohm direct input via concealed terminal block
• Extreme high efficiency (96dB 1W/1M) allows for lower tap settings and more loudspeakers per amp channel in many installations
• Cable mounting hardware included
• Compatible with standard 3/4″ ceiling fan hardware

Technical Specifications