Solar Power - Solar Meters

Optimize the placement of solar systems and verify window efficiency. The SOLAR-100 measures solar output that is used to calculate overall energy, efficiency and placement of solar systems.

Applications:

• Window performance – calculation and verification of the heating or heat reduction caused by direct sunlight
• Solar radiation measurements
• Solar power research for location of the solar panels or solar water heater
• Physics and optical laboratories
• Meteorology
• Agriculture

Features:

• Measures the solar power and transmission up to 2000 W/m2, 634BTU / (ft2xh)
• Power Mode – measurement of the power per unit area of incident solar radiation
• Transmission Mode – calculates the solar power transmission percentage of the material for example how much solar power in % will be transmitted through the window
• Convenient to read display with remote sensor technology
• Selectable measurement units either W/m2 or BTU / ( ft2 x h)
• Data Hold
• MAX/MIN functions to identify locations with maximum or minimum power

Technical Specifications

• Instruction Manual
• Detailed Specifications

Professional analyzer for testing, maintenance, troubleshooting and efficiency of solar panels. The analyzer is used in the installation of solar panels to determine the proper inverter size, optimum power output position of panels and identifies broken or worn-out cells.

• I-V Curve test for solar cell
• Maximum Solar Power (Pmax) search by auto-scan (60V, 6A)
• Maximum Voltage (Vmaxp) at Pmax
• Maximum Current (Imaxp) at Pmax
• Voltage at open circuit (Vopen)
• Current at short circuit (Ishort)
• I-V curve with cursor
• Calculation of panel efficiency (%)
• Manual single point test
• Users manual x 1, Software Manual x 1, 1.2V AA rechargeable batteries x 8 , AC adaptor x 1,RS232C (to USB Bridge) cable x 1, Software CD x 1, Kelvin Clips (6A max) x 1 set

Technical Specifications

• Instruction Manual
• Detailed Specifications

Professional analyzer for testing, maintenance, troubleshooting and efficiency of solar panels. The analyzer is used in the installation of solar panels to determine the proper inverter size, optimum power output position of panels and identifies broken or worn-out cells.

• I-V Curve test for solar cell
• Maximum Solar Power (Pmax) search by auto-scan (60V, 12A)
• Maximum Voltage (Vmaxp) at Pmax
• Maximum Current (Imaxp) at Pmax
• Voltage at open circuit (Vopen)
• Current at short circuit (Ishort)
• I-V curve with cursor
• Calculation of panel efficiency (%)
• Manual single point test
• Real Time data logging
• PC Download

Technical Specifications

• Instruction Manual
• Detailed Specifications