HVAC/Environmental Testers

The LM631 is a portable, easy-to-use, compact sized digital light meter designed for simple one hand operation with the measurement reading in lux or fc units. This value priced unit offers high resolution readings and adherence to published standards for human eye response to illuminance.

Designed for the Facility Engineer or Building Maintenance personnel who need to ensure indoor light and work area lighting requirements, compliance with safety regulations, security reasons to monitor building and security light levels. Anyone who wants to measure illumination levels.

• Measures wide range of light up to 20,000 fc or lux, front panel switchable
• Accurate, high resolution of 0.01 fc/lux
• Sensor dome has 45" attached cord
• Built-in CIE spectrum curve for accurate human eye response
• Peak hold and data hold
• Large, 3-1/2 digit display with backlight feature
• Meets CE EN61326-1 certification for safety ratings
• Shipped with carrying case, lens cover, batteries and manual

Features:

• Warranty: No hassle one year warranty
• Battery Life: 00 hours carbon-zinc battery
• Size: 170 x 44 x 40 mm
• Weight: 220 g

Technical Specifications

• Detailed Specifications

• Used to check fuses, breaker panels, power outlets, load break connectors, transmission lines, etc.
• Detects AC voltage without connection
• Audible signal
• Lightweight yet rugged
• Integrated switch guard
• Locates breaks in insulated wire
• Checks fuses and breaker panels
• Checks for proper grounding
• Made in the USA
• 9 VDC power supply
• Operating temperature 32°F to 125°F (0°C to 52°C)

Features:

• Warranty: One-year
• Size: 1.88 x 3.525 x 10.75 inch
• Weight: 0.5 lb
• Safety: UL, CE and MSHA Approved

TIC 300HV Detailed Spec Sheet

The TMA10A is ideal for HVAC/R technicians measuring Heat/Ventilation/ Air conditioning/Refrigeration wind flow and temperature in residential, commercial and industrial air conditioning systems. It offers numerous functions—use it to check air velocity FPM (Feet per minute), air volume (flow) CFM (Cubic feet per minute) plus the remote vane allows greater measurement location flexibility. Switch between °C and °F. Input the area of airflow measurement to gain accurate air velocity results. Measure an air flow source for a continuous moving average for up to two hours. Determine minimum, maximum and average readings from a single point air source.

Large dual display to view both air flow or velocity measurement plus temperature. Long extended flexible cord for remote vane access capabilities.

All the TMA10A measurements can be output to a computer for charting or analysis by optional model TM-SWA software and RS232 cable. Shipped in a deluxe hard carry case to protect and transport your Anemometer.

• Measure air velocity or air flow
• RS232 interface output with optional software and cable, TM-SWA
• Continuous moving average for up to 2 hours
• MIN/MAX/AVG reading on a single point
• Air Velocity average for multiple points
• Data Hold to freeze measurement display of both readings
• Auto power off function
• Obtain air flow (CFM) average for multi-point

Features:

• Warranty: One-Year
• Battery Life: 100 hours
• Size: 181 mm x 71 mm x 38 mm (7.1 in x 2.8 in x 1.4 in)
• Weight: 363 g (0.8 lb) including battery and sensor

Technical Specifications

• TMA10A Instruction Manual
• Detailed Specifications

The TMD90A is a dual input thermometer that accepts type K, J, T, R, S, and E thermocouples and is ideal for HVAC/R technicians, electricians, research, industrial process, and quality control. The dual inputs allow easy super-heat and sub-cool temperature measurement as well as cut-out and in temperature measurements. The triple display with backlight shows T1, T2, and T1 - T2 and includes Hold, Min/Max, Relative, and Timer / Date Stamp function.

The TMD90A supports dual channel real time data acquisition using the built-in RS-232 interface and optional software and data transfer cable (Model TM-SWA).

• High accuracy, multiple type input thermometer
• Displays T1, T2, and T1-T2 simultaneously
• Accepts six different thermocouple types
• Outputs real time measurement data with time stamp
• Measures from -328°F / -200°C to 3200°F / 1760°C
• Deluxe carrying case and two Type K probes
• RS232 output with optional cable and software, TM-SW

Technical Specifications

• TMD90A Instruction Manual
• Detailed Specifications

Point and press for quick and easy temperature measurement.

The IR608A is an infrared thermometer with a laser pointer for easy targeting. A quick and effective diagnostic tool for identifying problems in a wide variety of applications like HVAC/R, fire safety and protection, industrial maintenance automotive and quality control. The IR608A is robust yet lightweight with a solid ergonomic design.

• "Pistol grip design" for comfortable grip
• Small enough to fit in your pocket
• Measuring range - 18 °C to 400 °C (0 °F to 750 °F)
• Fixed emissivity at 0.95
• Laser sighting for accurate targeting (CE EN60825 certified Class II)
• Display hold
• Fast response time
• Distance to spot size ratio 8:1
• Accuracy to 2 %
• Backlit display
• Battery included
• Low Battery Indicator: Battery icon appears in display

Features:

• Warranty: One-year
• Battery Life: 12 hours Typical (Alkaline)
• Size: 152 mm x 101 mm x 38 mm (6 in x 4 in x 1.5 in)
• Weight: 227 g (0.5 lb)

IR608A Detailed Spec Sheet

Amprobe's TM-SWA is an optional RS232 cable and software. The TM-SWA is used with the Amprobe TMD90A Digital Thermometer and TMA10A Anemometer. This software acquires and displays data in real time. For the TMD90A record both T1 and T2, for the TMA10A record both the air flow and temperature simultaneously.

Installation Specifications

Hardware Requirements:

Windows 95/98/NT/2000/ME/XP operating systems with a COM1 or COM2 serial port.