Hand-Held Portable Multimeters

33XR-A

For field service technicians, the 33XR-A has the measurement functions needed for maintenance, repair and installation of electrical, HVAC and electro-mechanical equipment.

37XR-A

For electronics, the 37XR-A is a high-resolution, true RMS meter for troubleshooting electronic circuits at the bench or on the job site. The 37XR-A features capacitance, inductance, frequency, logic test, peak hold, dBm and backlight.

34XR-A

For contractors and field service technicians, the 34XR-A provides a true RMS, autoranging meter for trouble-shooting difficult problems. 34XR-A features temperature, capacitance and frequency.

38XR-A

For Engineers designing and troubleshooting industrial automation and control systems, the 38XR-A delivers the highest safety rating available - CAT IV 600 V and CAT III 1000 V. The features include temperature, capacitance, frequency, 4-20mA loop current percentage, backlight and PC interface.

HD110C

The HD110C is designed for professional use in harsh environments. The meter is unusually rugged and reliable in everyday heavy use applications. The meter is made using waterproof construction to prevent dirt, grime and moisture from entering the case and causing inaccurate readings or damaging shorts.

AM8C

The ideal, compact-size meters for basic, low-cost test and measurement troubleshooting.

DM7C

The ideal, compact-size meters for basic, low-cost test and measurement troubleshooting.

DM78B

The DM78B is a shirt-pocket size meter with all of the resolution and measuring functions of larger, more expensive meters.

5XP-A

The Amprobe 5XP-A digital multimeter provides superior features and accuracy in a smaller form factor.

15XP-A

The 15XP-A is the right choice for electronics engineers, technicians and field service.

PM51A

The PM51A is an easy to use pocket meter that delivers all basic multimeter functions plus frequency and capacitance measurement capability. Completely autoranging with innovative control layout.

PM55A

The PM55A is the most full featured multimeter in this minute size. Includes VolTect and AutoTect. It measures AC and DC voltage to 600 V, AC and DC current to 2000 µA, resistance to 6 MΩ, capacitance to 2000 µF, and frequency to 30 kHz.

PM53A

The PM53A offers easy on-button access to all its advanced functions. It contains features of a larger meter in such a small unit. The PM53 is fully autoranging and has VolTect, a built-in non-contact AC voltage detector. Plus it uses AutoTect to automatically detect the measurement of AC volts, DC volts or resistance.

AC68C

• Top-of-the-line professional clamp DMM
• 8 functions/11 ranges
• 8 functions/11 ranges
• Data and AC Peak Hold
• DC auto zero
• Carrying case included

ACD-14 FX

• Dual Displays - Permits simultaneous reading of Amperage & Voltage
• Micro Amps measurement for testing "Flame Sensors"
• AC and DC Voltage to 600V
• Temperature / Type-K Thermocouple
• AC Current to 400A

AC75

• Clamp meter, a multimeter, and a thermometer into one meter
• 600A AC current
• Digital thermometer to 400 °C (1000 °F), Type K probe included
• AC/DC Volts 750 V/1000

LCR55A

• The ultimate component checker measures inductance, capacitance, resistance, transistors, diodes and microwave diodes
• Plug-in test slots and test leads with threaded alligator clips
• Oversized, digital display

CR50A

• Sort, match, QC inspect and verify components, check circuits with this full range capacitance and resistance meter
• Dual zero adjustments pots to null strays and test leads
• Special “Low Ohms” range
• Oversized, read at-a-glance display

TIC300HV

AC Voltage 30 - 121,000VAC. Used to check fuses, breaker panels, power outlets, load break connectors, transmission lines, etc.

LM631A

The LM631A is a portable, easy-to-use, compact sized digital light meter designed for simple one hand operation with the measurement reading in lux or fc units. This value priced unit offers high resolution readings and adherence to published standards for human eye response to illuminance.

TMD90A

The TMD90A is a dual input thermometer that accepts type K, J, T, R, S, and E thermocouples and is ideal for HVAC/R technicians, electricians, research, industrial process, and quality control. The dual inputs allow easy super-heat and sub-cool temperature measurement as well as cut-out and in temperature measurements. The triple display with backlight shows T1, T2, and T1 - T2 and includes Hold, Min/Max, Relative, and Timer / Date Stamp function.

TMA10A

The TMA10A is ideal for HVAC/R technicians measuring Heat/ Ventilation/Air conditioning/ Refrigeration wind flow and temperature in residential, commercial and industrial air conditioning systems.

IR608A

The IR608A is an infrared thermometer with a laser pointer for easy targeting. A quick and effective diagnostic tool for identifying problems in a wide variety of applications like HVAC/R, fire safety and protection, industrial maintenance automotive and quality control. The IR608A is robust yet lightweight with a solid ergonomic design.

TM-SWA

Amprobe's TM-SWA is an optional RS232 cable and software. The TM-SWA is used with the Amprobe TMD90A Digital Thermometer and TMA10A Anemometer. This software acquires and displays data in real time. For the TMD90A record both T1 and T2, for the TMA10A record both the air flow and temperature simultaneously.