Circuit Board Holders

PanaVise Circuit Board Holders help you work quicker and smarter. The two moveable arms extend 6" (154mm) from the cross bar and have "V" shaped grooves which securely hold the board edge. One arm is spring tensioned to equalize holding pressure, and includes a new lever which locks the internal spring "open" for quick board insertion and removal. "V" notches positioned laterally near the arm tips securely and conveniently hold small electronic parts. All our vises and work holding devices come with a "lifetime warranty."

Model 315

Circuit Board Holder

Hold circuit boards from 1/8" (3.2mm) to 12" (304.8mm) wide and 5/32" (4mm) thick. Arms move independently.
Add the 318 Accessory Cross Bars and the bar width can be extended from 14" (355.6mm) to 30" (762mm) to hold boards up to 28" (711.2mm) wide.
Arms move independently and may be positioned adjacent to each other. Additional sets of arms (Model 316) are available for dual or multiple board use.
Ratcheted pivot for added adjustability, holds board horizontally, vertically or any angle in between.
The stem is 5/8" (15.9mm) in diameter and fits all 300 Series Bases.
Overall height (including stem) is 10 7/8" (276.2mm)

Part #	Description	Lashen's Price
315	CIRCUIT BOARD HOLDER	$32.39

Model 324

Electronic Work Center

The PanaVise Electronic Work Center is a complete and economical work bench combination.
It delivers a set of circuit board holders, all the "tilt, turn and rotate" control of a 300 Standard Base, the convenience of a 312 Tray Base Mount and a 371 Solder Station.
Hold circuit boards from 1/8" (3.2mm) to 12" (304.8mm) wide and 5/32" (4mm) thick. Arms move independently.
Add the 318 Accessory Cross Bars and the bar width can be extended from 14" (355.6mm) to 30" (762mm) to hold boards up to 28" (711.2mm) wide.
Arms move independently and may be positioned adjacent to each other. Additional sets of arms (Model 316) are available for dual or multiple board use.
All parts, tooling, wire, soldering iron and PC Boards are located exactly where you want them. Sturdy and stable.
The 324 Electronic Work Center stands 13 1/2" (342.9mm) tall and weighs 4lbs. 8oz. (2kg).

Part #	Description	Lashen's Price
324	ELECTRONIC WORK CENTER	$82.79

Model 333

Rapid Assembly Circuit Board Holder

The PanaVise Rapid Assembly Circuit Board Holder features eight position rotating adjustment, six positive lock positions in the vertical plane and height adjustment for quick board rotation speeds and component insertion and soldering.
Hold circuit boards from 1/8" (3.2mm) to 12" (304.8mm) wide and 5/32" (4mm) thick. Arms move independently.
Add the 318 Accessory Cross Bars and the bar width can be extended from 14" (355.6mm) to 30" (762mm) to hold boards up to 28" (711.2mm) wide.
Arms move independently and may be positioned adjacent to each other. Additional sets of arms (Model 316) are available for dual or multiple board use.
Weighted base is extremely stable.
Weighs 6lbs. 7oz. (2.9kgs). Height from base to top of vertical shaft is 10" (254mm).