DHC Controllers - Red Line

Uni-Base Wall Mounted Controller Body with Scene Control Capability

The Cat. No. 16400 accepts any of the Cat. No. 16450 Controller Faces. Controller Faces feature LED to the left of each keypad to indicate last ON/OFF command signal sent to an address. Faces are provided with press-on labels to identify fixture(s) controlled and a clear plastic cover to protect the face and labels. Back offset strap on 16400 Uni-Base body provides unit with a clean, flush-mounted appearance. The 16400 features Intellisense (gated automatic gain control) to transmit clear command signals without noise interference. Intellisense™ Technology enhances overall system performance and reliability. The 16400 command signals will not effect command signals sent simultaneously from other transmitters.

Rated: 120V 60Hz AC Only. Power Consumption: 2 Watts

One-Button Controller Face

One ON/OFF keypad transmits ON/OFF commands to one address.

One-Button ALL LIGHTS ON/ALL OFF Controller Face

One ALL LIGHTS ON/ALL OFF keypad transmits commands to all receivers set to the same letter code as this controller. Provides "Panic Button" lighting control for safety and security.

NOTE: Receptacle Receivers will not respond to ALL ON command.

Two-Button Controller Face

Two ON/OFF keypads transmit ON/OFF commands for two sequential addresses set to the same letter code as this controller.

Two-Button Dimming Controller Face

One-ON/OFF keypad transmits ON/OFF commands and one keypad transmits DIM and BRIGHT commands for one address in the same Letter Code group as this controller.

Four-Button Controller Face

Four ON/OFF keypads transmit ON/OFF commands for (4) sequential addresses set to the same letter code as this controller.

Four-Button ALL LIGHTS ON/ALL OFF Controller Face

Three ON/OFF keypads transmit ON/OFF commands for three sequential addresses set to the same letter code as this controller, and one keypad transmits ALL LIGHTS ON/ALL OFF to all receivers set to the same Letter Code as this controller (except receptacle receivers).

Four-Button Dimming Controller Face

Three ON/OFF keypads transmit ON/OFF commands to three sequential addresses in the same letter code group as this controller and one keypad transmits DIM and BRIGHT commands for the same three addresses.

Table Top Controller

Provides manual remote control for all 256 DHC addresses. Command functions include ON/OFF, ALL LIGHTS ON/ALL OFF and DIM/BRIGHTEN. The 6320 plugs into any 120 volt AC receptacle to transmit command signals over existing AC wiring.

Rated: 120V 60Hz AC only.

Features:

• Programmers add user-devised scheduling to DHC automated control of lights and appliances for greater convenience, energy savings and security
• Programmers and Controllers plug into any receptacle to send DHC switching commands over existing 60Hz 120V AC house wiring
• Leviton's Hand-Held Controller adds the convenience of wireless fingertip control of appliances and lighting to DHC systems

Passive Infrared Controller

A motion-sensing light control ideal for use in outdoor locations, such as backyards, garages and storage buildings. Built-in infrared sensing technology monitors 4,000-sq. ft. field, 110 degrees wide, up to 40 feet in front of unit. When the 6417 senses motion in its field of view, it can respond by sending two types of signals: ON commands to Receivers set to control lights at four sequential system addresses, and MOTION DETECTED signals to other 6417's set to the same address. As long as the source of infrared radiation remains in the 6417 sensor field, it continues to send ON signals every six seconds to these addresses, providing the convenience of continuous illumination along a path from a garage to an entranceway, or around an entire residence, if desired. It can also turn on an inside lighting fixture as well as outdoor fixtures to help deter intruders.

The 6417 is encased in a moisture-resistant housing. The control panel includes sensitivity adjustments to prevent nuisance tripping by small animals and a time delay to set the length of time the lights stay on (6 seconds to 30 minutes). Manual override of the 6417 controller can be achieved with the use of 16400/16450,6320, 26311 or 6312 Controllers.

Passive Infrared Transmitter installs easily into standard round outdoor junction box and comes complete with mounting plate, control unit, par lamp holders and complete installation and operating instructions.

Color: Brown