WRS5000X

Five-function Rework and Repair System

400 watts of total power over four independently controlled channels (100 watts per channel) plus air and vacuum ports allows you to use up to six tools simultaneously: soldering, desoldering, hot air, and thermal tweezers, dispensing, and vacuum pickup.

Vacuum delay feature on the desoldering tool allows the solder to reach the solder collection chamber before the vacuum is shut off to avoid clogging.

• Built-in pump provides both air for the hot air tool and vacuum for the desoldering tool
• Microprocessor with digital read-out gives you complete accuracy and reliability
• Temperature set-back can be programmed with the built-in timer from 5 to 60 minutes in 5 minute intervals
• Air flow for the hot air tool and vacuum for desoldering are activated by a finger switch on the tools
• Includes a vacuum pickup wand for handling components
• Dispensing and vacuum pickup wand utilize fast-acting shop air
• Timer on the front panel allows dispensing in timed intervals
• Lock-out key to maintain process control for set parameters
• Full range of soldering tips, desoldering tiplets, hot air nozzles, and thermal tweezers tips are available
• Special ionizing circuit assures that hot air is static free to protect sensitive components

Production, rework, and repair of through hole and SMT boards. Applications requiring non-contact hot air. Heavy ground
planes and multi-layer boards. Solder paste, epoxy, silicone, and potting compound dispensing applications. Lead-free solder
applications.

• WRS3000 and WRS2000 control units
• WSP80 soldering pencil
• WPH80 stand and sponge
• DSV80 in-line desoldering pencil
• AKV stand and sponge
• HAP1 hot air pencil
• PH60 stand and sponge
• WTA50 thermal tweezers
• AK51 stand and sponge
• vacuum pencil
• syringe and needle
• vacuum pencil and syringe stand

Limited Quantity In Stock

WAD101

Digital Shop Air Hot Air Station

• Features digital temperature control with easy to read LED display for fast and accurate temperature set of the hot air
• Programmable using the optional WCB1 control module. Allows for temperature lockout for process control, temperature setback and °F to °C conversion

• Rework and repair of SMT boards. Sensitive applications requiring non-contact hot air. Some ground planes and multi-layer boards.

• Air flow is adjustable using knob on the side of the power unit
• Compact design is ideal for soldering, desoldering, and rework of SMT components
• Uses fast acting shop air or compressed nitrogen
• Air flow is actuated by a finger switch on the hot air pencil
• Full range of hot air nozzles is available on page 21
• ESD safe to protect sensitive components

WR3M

Digital Self-Contained 3 Function Rework Station

New Design

Weller has taken the rework station to the highest level; with the new WR3M. The versatile repair station is specifically tailored to the needs and requirements of professional repairs to latest-technology electronic sub-assemblies in industrial production engineering and in the repair and laboratory fields.

3 independent tool channels

with automatic tool detection guarantee the simultaneous operation of 3 soldering tools. Precise temperature control performance at the soldering tip is guaranteed by the digital control electrotechnology together with superior quality sensor and heat-transfer technology. High-speed measured-value acquisition provides for maximum temperature precision and optimum dynamic temperature performance in load situations.

High-Speed Micro Tools

All Weller High-Speed Micro Tools such as the WMRP micro soldering pencil and the WMRT micro desoldering tweezers can be connected. But also extremely powerful accessories, such as the new HAP200 hot-air pencil, can be easily connected.

Hot-air pencil HAP200

The HAP 200 provides a directional hot air flow that is adjustable. Electronic temperature control from 150°F to 999°F. Different nozzles available as accessory. Finger switch controls adjustable pump. (For use with WR 3M only.)

USB port

The WR3M is equipped with a mini USB port. The extensive PC software supplied can be used to update the software on the control unit. Software for monitoring, parameterising and data logging is included in the software package.

Operation simplicity

The big LCD display allows clear information and simple handling. Innovative special functions such as automatic channel changing, temperature preselection buttons for each channel, Factory Calibration Check.

• Large selection of rework accessories available - customize your system
• 400 watts of power over 3 independently controlled channels
• Air and vacuum ports allow the use of up to 3 tools simultaneously
• Compatible with high speed micro tools WMRP and WMRT
• USB port allows the use of included PC software for data logging
• Optional WRK desoldering set allows components removal up to 30 x 30mm
• Optional WVP vacuum pen allows easy handling of components
• Large, intuitive LCD display shows critical functions for 3 channels

WR3000M

Digital Self-Contained 3 Function Rework Station with Tools

New Design

Weller has taken the rework station to the highest level; with the new WR3M. The versatile repair station is specifically tailored to the needs and requirements of professional repairs to latest-technology electronic sub-assemblies in industrial production engineering and in the repair and laboratory fields.

3 independent tool channels

with automatic tool detection guarantee the simultaneous operation of 3 soldering tools. Precise temperature control performance at the soldering tip is guaranteed by the digital control electrotechnology together with superior quality sensor and heat-transfer technology. High-speed measured-value acquisition provides for maximum temperature precision and optimum dynamic temperature performance in load situations.

High-Speed Micro Tools

All Weller High-Speed Micro Tools such as the WMRP micro soldering pencil and the WMRT micro desoldering tweezers can be connected. But also extremely powerful accessories, such as the new HAP200 hot-air pencil, can be easily connected.

Hot-air pencil HAP200

The HAP 200 provides a directional hot air flow that is adjustable. Electronic temperature control from 150°F to 999°F. Different nozzles available as accessory. Finger switch controls adjustable pump. (For use with WR 3M only.)

USB port

The WR3M is equipped with a mini USB port. The extensive PC software supplied can be used to update the software on the control unit. Software for monitoring, parameterising and data logging is included in the software package.

Operation simplicity

The big LCD display allows clear information and simple handling. Innovative special functions such as automatic channel changing, temperature preselection buttons for each channel, Factory Calibration Check.

• WR3M Repair Station
• HAP200 Hot-air pencil with WDH30 Safety rest
• DXV80 Desoldering iron with WDH40 Safety rest
• WP80 Soldering iron with WDH10T Stop + go Safety rest
• WVP Vacuum pick up
• WDC2 Dry cleaner
• Adapter for HAP200 Hot-air Pencil
• CD with use software
• USB cable
• Nozzle replacement tool
• 1.2mm and 3.0mm hot gas nozzles
• Nozzle adapter for HAP200
• 2.3mm and 2.5mm desoldering nozzles
• Desoldering cleaning tools, brush, and spare filters
• Color-coded clips for easy tool identification